LMI Gocator 6300 Overview
The LMI Gocator 6300 series is a family of smart 3D laser line profilers with more than 6500 points per profile, an X data interval under 2.1 µm and Z repeatability from 0.15 µm.
Key Specifications
Specification | LMI Gocator 6300 |
Manufacturer | LMI Technologies |
Model | Gocator 6300 series |
Category | Vision & sensors / High-resolution 3D laser line profiler |
Points per profile | 6310: More than 6500; 6320: More than 6500 |
Scan rate, full field of view and range | 6310: More than 1700 Hz; 6320: More than 1800 Hz |
X profile data interval | 6310: Under 2.1 µm; 6320: Under 4.3 µm |
Repeatability Z | 6310: 0.15 µm; 6320: 0.30 µm |
Field of view | 6310: 13.4 to 14.5 mm; 6320: 28 to 31 mm |
Measurement range | 6310: 5.5 mm; 6320: 17 mm |
Clearance distance | 6310: 18.15 mm; 6320: 57.5 mm |
Dimensions | 6310: 155.25 x 140.25 x 57.50 mm; 6320: 145.25 x 151.71 x 57.50 mm |
Weight | 6310: 1.7 kg; 6320: 1.7 kg |
Price | Price on request |
Price available on request. Any price is indicative, not final and may change.
LMI Gocator 6300 Review Summary
The 6300 series is the highest-resolution laser profiler in the Gocator family. With more than 6500 points across a line of 14 or 31 mm, the spacing between points falls to about 2 µm, a level that used to require confocal sensors weighing ten times as much. The sensor weighs 1.7 kg. Speed at full frame is more than 1700 Hz, well below the 2500 series, so the choice between the two is resolution against speed. Only two models are offered, both with small fields of view.
Pros
More than 6500 points per profile
Point spacing down to about 2 µm
Sub-micron repeatability
Light at 1.7 kg
Measurement inside the sensor
Cons
Fields of view of 14.5 or 31 mm only
Slower than the 2500 series
Who It Is For
The series fits electronics manufacturers who need the finest lateral detail from a laser profiler on small parts.
Full review: LMI Gocator 6300 Review: Specs and Uses of the 6500-Point 3D Laser Line Profilers
