LMI Gocator 2100 Overview
The LMI Gocator 2100 series is a family of entry-level smart 3D laser line profilers with a VGA imager, 640 points per profile and fields of view up to 1260 mm.
Key Specifications
Specification | LMI Gocator 2100 |
Manufacturer | LMI Technologies |
Model | Gocator 2100 series |
Category | Vision & sensors / Entry-level 3D laser line profiler |
2120 | Resolution X 0.028 mm, Resolution Z 0.0018 mm, Field of view 18 to 26 mm, Clearance distance 40 mm, Measurement range 25 mm |
2130 | Resolution X 0.088 mm, Resolution Z 0.006 mm, Field of view 47 to 85 mm, Clearance distance 90 mm, Measurement range 80 mm |
2140 | Resolution X 0.19 mm, Resolution Z 0.013 mm, Field of view 96 to 194 mm, Clearance distance 190 mm, Measurement range 210 mm |
2150 | Resolution X 0.3 mm, Resolution Z 0.019 mm, Field of view 158 to 365 mm, Clearance distance 300 mm, Measurement range 400 mm |
2170 | Resolution X 0.55 mm, Resolution Z 0.055 mm, Field of view 308 to 687 mm, Clearance distance 400 mm, Measurement range 500 mm |
2175 | Resolution X 0.51 mm, Resolution Z 0.175 mm, Field of view 324 to 1010 mm, Clearance distance 650 mm, Measurement range 1350 mm |
2180 | Resolution X 0.75 mm, Resolution Z 0.092 mm, Field of view 390 to 1260 mm, Clearance distance 350 mm, Measurement range 800 mm |
Price | Price on request |
Price available on request. Any price is indicative, not final and may change.
LMI Gocator 2100 Review Summary
The 2100 series is the low-cost way into the Gocator family. It has the same all-in-one design as the more expensive lines, with scanning, measurement and pass or fail output inside the sensor, the same browser setup and the same Universal Robots certification. What it gives up is resolution: 640 points per profile against 1280 on the 2300 series. LMI positions it for inline inspection where the highest resolution is not needed.
Pros
Entry-level cost position in the range
Measurement inside the sensor
Seven models up to 1260 mm field of view
Universal Robots+ certified
Same geometry as the 2300 series
Cons
Only 640 points per profile
Who It Is For
The series fits manufacturers who need basic 3D checks, such as height, width and presence, on many stations at moderate cost.
Full review: LMI Gocator 2100 Review: Specs and Uses of the Entry-Level 3D Laser Line Profilers
