LMI Gocator 2500 Overview
The LMI Gocator 2500 series is a family of high-speed smart 3D laser line profilers with scan rates of up to 20,000 Hz and 1920 points per profile.
Key Specifications
Specification | LMI Gocator 2500 |
Manufacturer | LMI Technologies |
Model | Gocator 2500 series |
Category | Vision & sensors / High-speed 3D laser line profiler |
2510 | Field of view 13.0 to 14.5 mm, Measurement range 6 mm, Resolution X 8.0 µm, Repeatability Z 0.2 µm, Scan rate 2400 to 20000 Hz |
2512 | Field of view 13.0 to 14.5 mm, diffuse and specular, Measurement range 6 mm, Resolution X 8.0 µm, Repeatability Z 0.2 µm, Scan rate 2400 to 20000 Hz |
2520 | Field of view 25.0 to 32.5 mm, Measurement range 25 mm, Resolution X 13 to 17 µm, Repeatability Z 0.4 µm, Scan rate 1600 to 20000 Hz |
2522 | Field of view 25.0 to 32.5 mm, diffuse and specular, Measurement range 25 mm, Resolution X 13 to 17 µm, Repeatability Z 0.4 µm, Scan rate 1600 to 20000 Hz |
2525 | Field of view 40 to 68 mm, Measurement range 55 mm, Resolution X 21 to 36 µm, Repeatability Z 0.5 µm, Scan rate 1800 to 20000 Hz |
2530 | Field of view 48 to 100 mm, Measurement range 80 mm, Resolution X 28 to 54 µm, Repeatability Z 0.5 µm, Scan rate 2000 to 20000 Hz |
2540 | Field of view 120 to 292 mm, Measurement range 295 mm, Resolution X 64 to 160 µm, Repeatability Z 1.2 µm, Scan rate 1700 to 20000 Hz |
2550 | Field of view 154 to 518 mm, Measurement range 595 mm, Resolution X 80 to 270 µm, Repeatability Z 2.0 µm, Scan rate 1800 to 20000 Hz |
Price | Price on request |
Price available on request. Any price is indicative, not final and may change.
LMI Gocator 2500 Review Summary
The 2500 series is the fast line in the Gocator range. Where the 2600 series puts resolution first, the 2500 puts speed first: every model reaches 20 kHz in its high-speed configuration, including scanning, measurement and pass or fail decision. Blue lasers with special optics handle dark and mirror-like surfaces, and two models, the 2512 and 2522, are made for specular targets such as glass and polished metal. Fields of view run from 13 mm to about half a metre.
Pros
20 kHz inspection speed on every model
Blue laser for dark and shiny targets
Models for specular surfaces
Measurement and decision logic inside the sensor
Browser setup and multi-sensor support
Cons
1920 points per profile, fewer than the 2600 series
Who It Is For
The series fits manufacturers who must inspect every part on a fast line, especially in electronics and battery production.
Full review: LMI Gocator 2500 Review: Specs and Uses of the 20 kHz 3D Laser Line Profilers
