LMI Gocator 2500 Review: Specs and Uses of the 20 kHz 3D Laser Line Profilers

The LMI Gocator 2500 is a series of high-speed smart 3D laser line profilers with scan rates of up to 20,000 Hz and 1920 points per profile. The manufacturer does not publish prices. This review covers the models, specifications, features and uses.

Quick Verdict

The 2500 series is the fast line in the Gocator range. Where the 2600 series puts resolution first, the 2500 puts speed first: every model reaches 20 kHz in its high-speed configuration, including scanning, measurement and pass or fail decision. Blue lasers with special optics handle dark and mirror-like surfaces, and two models, the 2512 and 2522, are made for specular targets such as glass and polished metal. Fields of view run from 13 mm to about half a metre. Weight and protection rating are not given on the series page.

LMI Gocator 2500 at a Glance

• Scan rate: up to 20,000 Hz

• Points per profile: 1920

• Field of view: 13 mm to 518 mm across the series

• Laser: blue, with red options on the two largest models

• Models: eight

• Price: on request

LMI Gocator 2500 Models and Specifications

The table below lists the eight models in the series.

Model	Field of view	Measurement range	Resolution X	Repeatability Z	Scan rate
2510	13.0 to 14.5 mm	6 mm	8.0 µm	0.2 µm	2400 to 20000 Hz
2512	13.0 to 14.5 mm, diffuse and specular	6 mm	8.0 µm	0.2 µm	2400 to 20000 Hz
2520	25.0 to 32.5 mm	25 mm	13 to 17 µm	0.4 µm	1600 to 20000 Hz
2522	25.0 to 32.5 mm, diffuse and specular	25 mm	13 to 17 µm	0.4 µm	1600 to 20000 Hz
2525	40 to 68 mm	55 mm	21 to 36 µm	0.5 µm	1800 to 20000 Hz
2530	48 to 100 mm	80 mm	28 to 54 µm	0.5 µm	2000 to 20000 Hz
2540	120 to 292 mm	295 mm	64 to 160 µm	1.2 µm	1700 to 20000 Hz
2550	154 to 518 mm	595 mm	80 to 270 µm	2.0 µm	1800 to 20000 Hz

The lower scan rate applies to the default configuration and the higher rate to the high-speed configuration. Repeatability is measured on the maker's standard target with an optimized configuration.

Detailed Technical Data

• Blue laser on all models; red or blue on the 2540 and 2550

• Laser class 2 on the smallest models; classes up to 3B on larger ones

• Protective covers for camera and laser windows on the 2540 and 2550

Design and Build Quality

The series is built around a fast imager and blue laser light. Blue light scatters less inside translucent materials and gives a sharper line on dark or shiny surfaces than red light, which is why it is preferred for electronics, batteries and polished parts. The 2512 and 2522 are arranged to measure specular surfaces, which reflect the laser like a mirror and defeat ordinary profilers.

Software and Integration

Smart Sensor

Built-in tools perform 3D alignment, part segmentation and feature extraction on the sensor.

Setup

A built-in web server allows configuration from any browser.

Multi-Sensor Systems

Networking of several sensors is supported natively.

Connectivity

An open-source SDK, native drivers and industrial protocols connect the sensor to other equipment.

LMI Gocator 2500 Uses

The series is used where parts move fast or must be inspected completely.

Consumer Electronics

The small models measure fine features on electronic parts at high line speeds.

Battery and Semiconductor Production

The maker lists EV battery and semiconductor manufacturing among its industries.

Glass and Polished Parts

The specular models measure surfaces that reflect like a mirror.

LMI Gocator 2500 Price and Value

LMI Technologies does not publish prices for the Gocator 2500 series; quotes are available from the manufacturer and its distributors.

For the company behind the product, read the LMI Technologies Company Profile: Ownership and Products.

Pros and Cons

Pros

• 20 kHz inspection speed on every model

• Blue laser for dark and shiny targets

• Models for specular surfaces

• Measurement and decision logic inside the sensor

• Browser setup and multi-sensor support

Cons

• 1920 points per profile, fewer than the 2600 series

• Weight and protection rating not stated on the series page

• No published prices

Who Should Buy the LMI Gocator 2500?

The series fits manufacturers who must inspect every part on a fast line, especially in electronics and battery production.

---

LMI Gocator 2500 FAQ

How much does the LMI Gocator 2500 cost?

LMI does not publish prices; they are available on request.

How fast is the Gocator 2500?

Up to 20,000 Hz in the high-speed configuration.

How many points per profile does the Gocator 2500 deliver?

1920.

Which models are in the Gocator 2500 series?

The 2510, 2512, 2520, 2522, 2525, 2530, 2540 and 2550.

Can the Gocator 2500 measure shiny surfaces?

Yes. Blue lasers handle dark and shiny targets, and the 2512 and 2522 are made for specular surfaces.

What is the difference between the Gocator 2500 and 2600?

The 2500 is faster, at up to 20 kHz with 1920 points per profile; the 2600 has higher resolution, with up to 4192 points per profile and rates up to 10 kHz.

Does the Gocator 2500 need a separate computer?

No. Measurement tools run on the sensor.

What is the Gocator 2500 used for?

High-speed inline inspection, for example in electronics, battery and semiconductor production.

Specifications are based on manufacturer information and may change.