KUKA KR 700 PA Overview
The KUKA KR 700 PA is a 4-axis palletizing robot with a payload of 700 kg, a maximum reach of 3320 mm and a pose repeatability of ±0.08 mm. It is designed for palletizing heavy loads, including complete layers, and has IP65 protection against dust and water spray. The robot weighs about 2850 kg, is installed on the floor and runs on the KUKA KR C4 controller.
Key Specifications
Specification | KUKA KR 700 PA |
Manufacturer | KUKA |
Model | KR 700 PA |
Category | Robot arm / Palletizing robot |
Payload | 700 kg |
Reach | 3320 mm |
Repeatability | ±0.08 mm |
Speed | 17 cycles per minute at 700 kg |
Axes (DoF) | 4 |
Controller | KUKA KR C4 |
Interfaces | PROFINET; PROFIBUS; INTERBUS; EtherCAT; EtherNet/IP; DeviceNet; VARANBUS; PROFIsafe; CIP Safety; Gigabit Ethernet; USB 3.0 |
Certifications | ISO 10218-1; ISO 13849-1 Cat. 3 / PL d |
Price | From USD 125,000 |
Prices are indicative, are not final and may change.
Applications
Material handling
Machine tending
Assembly
Packaging
Inspection
Dispensing
Industries
Automotive · Electronics · Metalworking · Plastics · Food and beverage · Pharmaceuticals · Logistics
Technical Details
4 axes
Payload 700 kg
Reach 3320 mm
Repeatability ±0.08 mm
Weight 2850 kg
Mounting floor
Controller KR C4
KUKA KR 700 PA Review Summary
KUKA KR 700 PA is a Palletizing robot built around 700 kg payload capacity and 3320 mm reach. The product listing associates it with material handling, machine tending, assembly. The main selection question is whether its published working envelope and controller fit the intended cell.
For buyers comparing automation options, this model is best evaluated against the part mass, tool mass, cycle path and installation geometry together. The catalog price is a starting point and does not describe a complete integrated cell.
Pros
Payload and reach: 700 kg payload capacity with 3320 mm reach.
Application fit: the catalog lists material handling, machine tending, assembly.
Controller: KUKA KR C4
Cons
Motion range: 4 axes provide less tool-orientation freedom than a six-axis arm.
System sizing: payload, reach, end effector and installation requirements must be validated together.
Who It Is For
The KR 700 PA merits evaluation by manufacturers whose task matches the listed 700 kg payload, 3320 mm reach and 4-axis motion, especially for material handling, machine tending, assembly. It suits a project team ready to validate cycle performance, controller configuration, tooling and safety requirements before purchase.
Full review: KUKA KR 700 PA Review: Specs, Price and Applications of the 700 kg Robot
