RoboDK TwinTool Overview
RoboDK TwinTool automatically calibrates an industrial robot's tool center point using an off-the-shelf LVDT linear gauge, as a lower-cost alternative to laser calibration services.
A wizard guides setup with no programming. Tool errors of 2 to 5 mm typically drop to about 0.25 to 1 mm, up to 0.25 mm in some setups, a 2x to 10x improvement. It supports spherical and conical tools and sensors from Mitutoyo, KEYENCE and Sylvac.
Key Specifications
Specification | RoboDK TwinTool |
Manufacturer | RoboDK |
Model | TwinTool |
Category | Software & AI / Robot TCP calibration |
Accuracy | Up to 0.25 mm (2x to 10x improvement) |
Sensor | LVDT linear gauge (Mitutoyo, KEYENCE, Sylvac) |
Tools | Spherical and conical |
Process | Fully automatic, wizard guided |
Robots | 600+ arms from about 50 manufacturers |
Price | Price on request |
Price available on request. Any price is indicative, not final and may change.
Applications
TCP calibration
Assembly accuracy
Machining and soldering accuracy
Industries
Manufacturing
Electronics
Machining
Strengths
Low-cost accuracy gain
No programming
Limitations
Calibrates the tool only, not the whole robot
About RoboDK
RoboDK is a Canadian robot simulation and offline programming software company whose platform supports more than 1,400 robot arms from over 80 manufacturers and generates native programs for each controller.
Company profile: RoboDK
