HaiPick A42-E6S Overview
The HaiPick A42-E6S is a grappling-hook autonomous case-handling robot from Hai Robotics with a maximum payload of 300 kg, handling totes on single-, double- and triple-deep racks.
Key Specifications
Specification | HaiPick A42-E6S |
Manufacturer | Hai Robotics |
Model | HaiPick A42-E6S |
Category | Warehouse automation / Grappling-hook case-handling robot |
Type | Grappling-hook autonomous case-handling robot |
Max payload | Up to 300 kg |
Tote load | 30 kg standard; 50 kg customized maximum |
Rack depth | Single, double and triple-deep |
Horizontal tote spacing | 30 mm |
Longitudinal tote spacing | 0 mm |
Storage density | Up to 150% improvement with three-deep storage |
Handling efficiency | Up to 30% increase |
Building clearance | Designed for clear height under 6 m |
Safety | LiDAR, obstacle avoidance, collision alarm, emergency stop, lifting anti-fall protection |
Charging | Autonomous at a charging station |
Communication | Wi-Fi |
Price | Price on request |
Price available on request. Any price is indicative, not final and may change.
HaiPick A42-E6S Review Summary
A clamp needs space on both sides of a tote. A hook does not: it catches the front of the tote and draws it out. The A42-E6S uses this to pack totes with 30 mm between them sideways and none front to back, and to store three deep. Hai states up to 150% more storage density with triple-deep storage and up to 30% better handling efficiency. The robot carries up to 300 kg in total, with totes of 30 kg as standard or 50 kg customized, and is designed for buildings with less than 6 m clear height. A guard board on the rack positions the totes, so they need no QR codes.
Pros
Triple-deep tote storage
Near-zero spacing between totes
300 kg total payload
No codes on totes
Suited to low buildings
Cons
Needs totes and racks made for the hook
Who It Is For
It fits warehouses with low ceilings that need maximum tote density.
Full review: HaiPick A42-E6S Review: Specs and Uses of the Grappling-Hook Tote Robot
