UR10e vs Elite Robots EC612: 12 kg Cobot Comparison of Price and Features
Updated: 8 hours ago
IN A NUTSHELL
🔎 THE KEY DIFFERENCE This is a load-versus-reach trade-off: Universal Robots UR10e has the higher stated load capacity, while Elite Robots EC612 has the longer stated reach. Start with the constraint your task actually has. |
→ CONSIDER Universal Robots UR10e Consider it when additional load capacity matters more than extra reach. This article compares 12.5 kg with a published reach of 1300 mm; include the gripper and part in the load. |
→ CONSIDER Elite Robots EC612 Consider it when reaching farther matters more than the higher payload of the alternative. This article compares 12 kg with a published reach of 1304 mm; include the gripper and part in the load. |
💡 THE TAKEAWAY Check the real tool, movement path and safety assessment before choosing. A collaborative label does not make every task safe without guarding; compare complete installation quotes. |
The Universal Robots UR10e and the Elite Robots EC612 match each other almost line for line: about 12 kg over about 1300 mm, ±0.05 mm repeatability, a 33.5 kg arm and an IP54 rating. The real differences are price, speed, sensing and I/O.
Quick verdict. The Elite EC612 is the value choice, with a listed price about 39% lower, a 3.2 m/s speed and broad fieldbus support including CC-Link. The UR10e is the better choice for force-controlled tasks and plants built around UR robots and UR+ accessories.
UR10e and Elite Robots EC612 at a glance
The UR10e carries 12.5 kg over 1300 mm, repeats to ±0.05 mm and weighs 33.5 kg. Universal Robots has since renamed the model the UR12e.
The EC612 carries 12 kg over 1304 mm, repeats to ±0.05 mm and weighs 33.5 kg. Elite's newer CS612 also covers this payload class.
Main specification comparison
Specification | Universal Robots UR10e | Elite Robots EC612 |
Brand | Universal Robots | Elite Robots |
Listed price | $44,600 | $27,100 |
Payload | 12.5 kg | 12 kg |
Reach | 1300 mm | 1304 mm |
Repeatability | ±0.05 mm | ±0.05 mm |
Axes | 6 | 6 |
Speed | 120°/s (base, shoulder) and 180°/s (elbow, wrists) maximum joint speed | 3.2 m/s |
Arm weight | 33.5 kg | 33.5 kg |
IP rating | IP54 | IP54 |
Controller | UR control box CB 5.2 / CB 5.5 | Control cabinet, IP44, 100–240 VAC |
Price comparison
UR10e: listed from $44,600
Elite Robots EC612: listed from $27,100
Difference: $17,500
The EC612 costs roughly 39% less
Payload, reach and precision
On paper the arms are interchangeable: 12.5 kg against 12 kg, 1300 mm against 1304 mm, and ±0.05 mm repeatability for both. Both weigh 33.5 kg, so they fit the same pedestals and carts.
Speed
Elite publishes a 3.2 m/s maximum speed for the EC612. Universal Robots publishes joint speeds of 120°/s at the base and shoulder and 180°/s at the elbow and wrists for the UR10e.
Sensing and safety
The UR10e has a built-in 100 N / 10 Nm force/torque sensor and 17 configurable safety functions certified to EN ISO 13849-1 (PLd, Category 3). That is its main functional advantage for insertion, polishing and screwdriving.
Programming and connectivity
The UR10e runs PolyScope with hand-guided teaching and supports Modbus TCP, PROFINET and EtherNet/IP, with UR+ accessories.
Elite publishes Ethernet TCP/IP, Modbus TCP/RTU, EtherNet/IP, PROFINET, CC-Link and RS485/RS232 for the EC612, with 16 digital inputs, 16 digital outputs, 2 analog inputs and 4 analog outputs.
Best applications for the UR10e
Force-controlled screwdriving and finishing
Plants with existing UR cells
Projects built on UR+ accessories
Best applications for the Elite Robots EC612
Budget-conscious handling and palletizing
Machine tending up to 12 kg
Lines that use CC-Link
UR10e advantages
Built-in force/torque sensor
17 configurable safety functions
UR+ ecosystem
UR10e limitations
About $17,500 higher listed price
Elite Robots EC612 advantages
About 39% lower listed price
3.2 m/s speed
Broad fieldbus support including CC-Link
Elite Robots EC612 limitations
Smaller accessory ecosystem than UR+
Final verdict
Choose the Elite EC612 for the same envelope at a much lower price. Choose the UR10e when force control and the UR+ ecosystem justify the premium.
With identical weight and reach, the two arms can replace each other in an existing cell.
Sources and further reading
Frequently asked questions
Which is cheaper, the UR10e or the Elite EC612?
The EC612 is listed from $27,100 and the UR10e from $44,600, a difference of $17,500.
Do they have the same reach?
Practically yes: the EC612 reaches 1304 mm and the UR10e 1300 mm.
Are they equally precise?
Yes. Both publish ±0.05 mm repeatability.
Do they weigh the same?
Yes. Both arms weigh 33.5 kg.
Does the UR10e have force sensing?
Yes. A 100 N / 10 Nm force/torque sensor is built into the tool flange.
Which robot should I buy?
Choose the EC612 for value. Choose the UR10e for force control and UR+ accessories.
