UR10e vs DENSO COBOTTA PRO 1300: 12 kg Cobot Comparison
Updated: 8 hours ago
IN A NUTSHELL
🔎 THE KEY DIFFERENCE The stated reaches are equal at 1,300 mm. Universal Robots UR10e has the higher stated load capacity; the real benefit depends on the combined weight of your tool and part. |
→ CONSIDER Universal Robots UR10e Consider it when additional load capacity matters more than extra reach. This article compares 12.5 kg with a published reach of 1300 mm; include the gripper and part in the load. |
→ CONSIDER DENSO COBOTTA PRO 1300 Consider it when its stated load and reach already cover your task and its controls fit your equipment. This article compares 12 kg with a published reach of 1,300 mm; include the gripper and part in the load. |
💡 THE TAKEAWAY Check the real tool, movement path and safety assessment before choosing. A collaborative label does not make every task safe without guarding; compare complete installation quotes. |
The Universal Robots UR10e and the DENSO COBOTTA PRO 1300 are listed only $400 apart, both reach 1300 mm and both carry about 12 kg. DENSO's arm repeats a little more tightly. The UR10e is lighter and comes with built-in force sensing and the UR+ ecosystem.
Quick verdict. The UR10e is the better choice for lighter installations and force-controlled tasks, with a 33.5 kg arm and a built-in force/torque sensor. The DENSO COBOTTA PRO 1300 is the better choice for slightly tighter repeatability and plants that already use DENSO RC9 controllers.
UR10e and DENSO COBOTTA PRO 1300 at a glance
The UR10e carries 12.5 kg over 1300 mm, repeats to ±0.05 mm and weighs 33.5 kg. Universal Robots has since renamed the model the UR12e.
The COBOTTA PRO 1300 carries 12 kg over 1300 mm, repeats to ±0.04 mm, weighs 41 kg and runs on the DENSO RC9 controller.
Main specification comparison
Specification | Universal Robots UR10e | DENSO COBOTTA PRO 1300 |
Brand | Universal Robots | DENSO |
Listed price | $44,600 | $45,000 |
Payload | 12.5 kg | 12 kg |
Reach | 1300 mm | 1,300 mm |
Repeatability | ±0.05 mm | ±0.04 mm |
Axes | 6 | 6 |
Speed | 120°/s (base, shoulder) and 180°/s (elbow, wrists) maximum joint speed | Max. TCP speed 2,500 mm/s |
Arm weight | 33.5 kg | 41 kg |
IP rating | IP54 | Not specified |
Controller | UR control box CB 5.2 / CB 5.5 | DENSO RC9 |
Price comparison
UR10e: listed from $44,600
DENSO COBOTTA PRO 1300: listed from $45,000
Difference: $400, effectively the same
Payload and reach
Both robots reach 1300 mm. The UR10e carries 12.5 kg, half a kilogram more than the COBOTTA PRO 1300. In practice they cover the same palletizing, handling and machine tending layouts.
Precision and speed
DENSO publishes ±0.04 mm repeatability and a 2,500 mm/s maximum TCP speed for the COBOTTA PRO 1300. The UR10e publishes ±0.05 mm repeatability, with joint speeds of 120°/s at the base and shoulder and 180°/s at the elbow and wrists.
Weight and mounting
The UR10e weighs 33.5 kg, about 7.5 kg less than the COBOTTA PRO 1300. The lighter arm is easier to place on columns, carts and mobile bases.
Sensing and safety
The UR10e has a built-in 100 N / 10 Nm force/torque sensor and 17 configurable safety functions certified to EN ISO 13849-1 (PLd, Category 3). As with any cobot, the final cell layout for either robot should be confirmed by a risk assessment.
Programming and software
The UR10e runs PolyScope with hand-guided teaching and supports Modbus TCP, PROFINET and EtherNet/IP, with the UR+ accessory ecosystem. The COBOTTA PRO 1300 runs on DENSO's RC9 controller. DENSO notes that programming interfaces, licences and simulation tools vary by package, so buyers should confirm what is included.
Best applications for the UR10e
Palletizing and machine tending on light mounts
Force-controlled screwdriving and finishing
Projects built on UR+ accessories
Best applications for the DENSO COBOTTA PRO 1300
Precise handling up to 12 kg
Plants standardized on DENSO controllers
Fixed machine tending cells
UR10e advantages
33.5 kg arm
Built-in force/torque sensor
UR+ ecosystem
UR10e limitations
±0.05 mm repeatability
DENSO COBOTTA PRO 1300 advantages
±0.04 mm repeatability
2,500 mm/s maximum TCP speed
DENSO RC9 controller platform
DENSO COBOTTA PRO 1300 limitations
41 kg arm
Final verdict
At the same price and reach, choose the UR10e for a lighter arm and force-controlled tasks, and the DENSO COBOTTA PRO 1300 for slightly tighter repeatability and DENSO-standard plants.
The existing controller platform in the plant is often the deciding factor.
Sources and further reading
Frequently asked questions
Which is cheaper, the UR10e or the DENSO COBOTTA PRO 1300?
They are practically the same: the UR10e is listed from $44,600 and the COBOTTA PRO 1300 from $45,000.
Do they have the same reach?
Yes. Both reach 1300 mm.
Which robot is more precise?
The COBOTTA PRO 1300 publishes ±0.04 mm repeatability and the UR10e ±0.05 mm.
Which robot is lighter?
The UR10e weighs 33.5 kg and the COBOTTA PRO 1300 41 kg.
Does the UR10e have force sensing?
Yes. A 100 N / 10 Nm force/torque sensor is built into the tool flange.
Which robot should I buy?
Choose the UR10e for a lighter arm and force control. Choose the COBOTTA PRO 1300 for DENSO-standard plants.
