Technosoft iPOS4815 MZ-CAT Embedded Servo Drive
Technosoft iPOS4815 MZ-CAT combines a programmable motion controller and EtherCAT servo amplifier in a module intended for a carrier board. It is the embedded MZ configuration, distinct from the separately packaged XZ-CAT drive.
Key Specifications
Exact identity | P022.016.E122; iPOS4815 MZ-CAT |
Motor / logic / STO supplies | 11–50 VDC / 9–36 VDC / 18–40 VDC |
Sinusoidal nominal current | 15 A RMS / 21.2 A amplitude |
Sinusoidal peak current | 28.3 A RMS / 40 A amplitude; duration and derating apply |
Current datasheet dimensions | 64 × 43.8 × 15.7 mm; approximately 34 g |
Critical socket constraint | Recommended plug-in J3 socket limited to 12.7 A sine amplitude; higher-current arrangement uses direct soldering |
Network and service | EtherCAT; USB; LV-TTL UART, with external transceiver for RS232 |
Network hardware | Standard RJ45 connection requires external magnetics |
Applications and Industries
OEM machine axes requiring a carrier-board servo drive, EtherCAT integration and compatible motor feedback.
Industrial automation; embedded motion systems; machine building
Review Summary
iPOS4815 MZ-CAT is a useful candidate when an OEM wants EtherCAT motion control integrated into its own electronics. The decisive selection issue is the entire carrier installation, especially the power connector: the module rating cannot be assumed available through every removable socket arrangement.
Price and Configuration
Request a quote for the selected configuration,quantity and delivery schedule. Confirm the exact model,options,integration scope and support terms.
