Teledyne DALSA Genie Nano-CL Review
Updated: 7 days ago
Teledyne DALSA Genie Nano-CL is a CMOS area-scan family using conventional Camera Link. Model choices include different sensor grids and Base or Extended-Full receiving scope. A shared connector family does not establish identical receiver requirements. Price: Request a quote.
The camera should be selected as part of an imaging system rather than evaluated from one headline specification. The useful result is an image that reveals the required feature at the right time, followed by a reliable inspection or measurement decision. This review considers the documented acquisition package, optical implications and practical purchasing scope for Genie Nano-CL.
Quick Verdict
Nano-CL merits evaluation when a supported camera can meet the required image within an existing or new Camera Link station. Reuse of hardware is useful only when its mode, cables and software are compatible with the exact order. Verify the complete inspection after replacement rather than assuming that a faster sensor leaves the old recipe unchanged.
Genie Nano-CL Technical Specifications
Specification | Value or configuration |
Product | Teledyne DALSA Genie Nano-CL |
Image format | Model-specific area image; select the exact ordering code |
Acquisition | Global-Shutter Cmos; Confirm Ordered Model |
Interface | Camera Link; exact mode and model dependent |
Capture rate | Model-specific; no single family-wide operating point |
Acquisition | CMOS area-scan camera family |
Interface | Model-specific Camera Link mode |
Example M2420 | 2448 × 2048; 35 fps in Base configuration |
Example M2450 | 2464 × 2056; 141 fps in Extended-Full configuration |
Commissioning | Compatible receiver, Sapera LT and CamExpert scope |
Price | Request a quote |
Design and Optical Requirements
Choose optics for the actual sensor area, pixel pitch and required field. Related model names can have different active grids and sampling. Evaluate full-field contrast and normal part-height variation with the selected camera. Preserving the same nominal lens mount does not guarantee the same field or calibration.
Acquisition Speed and Integration
The current M2420 and M2450 examples have different Camera Link modes and rates. Match receiver capacity and wiring to the ordered code. Conventional Camera Link should not be treated as Camera Link HS. Test sustained complete-image delivery and trigger association with the actual inspection processing and retained diagnostics.
Programming and Image Processing
Preserve exposure, trigger, image region and output representation with the supported receiving configuration. Confirm available controls for the exact camera and firmware. Test representative normal and faulty scenes after a setting changes, and keep accepted reference images with the machine recipe. Automatic brightness or a smaller region should not silently change the information used by the inspection.
Image Data and Host Capacity
Budget the actual width, height, channel count, output representation and selected acquisition frequency together. A family maximum resolution and a family maximum speed can belong to different models. Include transfer overhead, buffers, processing and retained images. Validate the final receiving hardware under the real inspection workload rather than sizing the station from a catalog headline.
Genie Nano-CL Applications and Use Cases
Component and surface inspection or an existing-camera migration can merit a selected-model trial. Use representative normal, faulty and borderline parts, and compare the accepted method before and after replacement. Verify not only image clarity but exposure timing, pixel interpretation and machine output. A migration can change a threshold-sensitive result even when the scene looks similar.
Building a Useful Acceptance Trial
Prepare representative parts or scenes that include the smallest required feature, normal production variation and realistic faults. Confirm the field of view and exposure before tuning the inspection. Record wrong accepts, wrong rejects, missing frames and the complete trigger-to-decision timing. A trial should also show what happens when the expected image is absent or unusable. This connects camera selection to the station's actual acceptance requirement rather than relying on a sharp reference picture.
Genie Nano-CL Price and Value
Price: Request a quote. Ask for the complete Genie Nano-CL ordering code and an itemized scope covering the camera, suitable optics, receiving hardware, cables, power and commissioning. Compare quotations for the same image format, acquisition mode and integration scope. The cost of a camera component is different from the cost of a working inspection station. Evaluate any financial return with the plant's actual labor, defect, rework and maintenance data; no universal payback period follows from these specifications.
Comparison and Selection
Compare Nano-CL models on sensor, output mode and receiving scope rather than treating Base and Extended-Full as equivalent. A GigE Nano alternative changes networking and commissioning requirements. Keep reuse claims conditional on verified compatibility and performance with the intended frame grabber, cables and acquisition software.
Ordering, Environment and Lifecycle
Require the full G3 code, Camera Link mode, output representation, power arrangement and current model status. Use the exact datasheet rather than an older family resolution range. Confirm compatible Sapera LT and CamExpert support and preserve the frame-grabber settings with the accepted camera recipe.
Pros and Cons
Pros
Model-specific documentation supports a coherent acquisition requirement.
Supported camera controls can preserve a commissioned recipe.
A defined receiver and optical arrangement support a focused trial.
Cons
Family headlines do not establish every model’s operating point.
Optics and receiving hardware remain part of system selection.
Capture rate does not guarantee completed inspection throughput.
Who Should Buy Genie Nano-CL?
Shortlist Genie Nano-CL when its documented sensor, interface and acquisition mode match the imaging task and the team can demonstrate the complete host pipeline. Use the sample trial to establish whether the relevant features remain distinguishable under the expected lighting, presentation and motion. Before purchase, settle the optical configuration, ordering variants and support requirements. The best choice is the configuration that satisfies the acceptance criteria with a maintainable system architecture.
Genie Nano-CL FAQ
Is Nano-CL a Camera Link HS camera?
No. The reviewed branch uses conventional Camera Link.
Do all models use the same Camera Link mode?
No. Confirm Base or Extended-Full scope for the exact code.
What does M2420 illustrate?
2448 × 2048 at 35 fps in its documented Base configuration.
What does M2450 illustrate?
2464 × 2056 at 141 fps in its documented Extended-Full configuration.
Can every old frame grabber be reused?
No. Confirm mode, receiver, cables and software compatibility.
Does preserving C-mount preserve calibration?
No. Verify sensor geometry, optics and the actual measurement or inspection.
What is the price?
Price: Request a quote for the exact camera, optics, receiving hardware, power, cables and commissioning.
What should acceptance verify?
Verify useful optical information, complete image delivery, trigger association and the actual result under the intended machine workload.
Price: Request a quote. Final configuration, pricing, availability and support terms depend on the supplier's current quotation.
