SICK InspectorP64x Review: Specs, Price and Applications
Updated: 2 days ago
The SICK InspectorP64x is a 2D snapshot vision sensor, listed from USD 7,300. This review covers its full specifications, design, integration, applications and price, so you can decide whether it fits your automation project.
Quick Verdict
The SICK InspectorP64x is a programmable 2D vision sensor with a 1.7 MP CMOS imager (1,600 x 1,088 px) and a frame rate of 40 Hz. In robot cells it is used for part inspection, measurement and 2D part localization, typically mounted in a fixed position above the pick or assembly area. It takes C-mount lenses in 2/3 inch format, and illumination is added as an accessory. The housing measures 142 x 90 x 46 mm, weighs 635 g and is rated IP65. It runs on 24 V DC and communicates via Gigabit Ethernet, EtherNet/IP, PROFINET, CAN and RS-232/RS-422. It is listed from USD 7,300.
SICK InspectorP64x at a Glance
Product type: 2D snapshot vision sensor
Price: from USD 7,300
SICK InspectorP64x Technical Specifications
The table below lists the published specifications of the SICK InspectorP64x.
Specification | SICK InspectorP64x |
Manufacturer | SICK |
Model | InspectorP64x |
Product type | 2D snapshot vision sensor |
Interfaces | Ethernet TCP/IP (10/100/1,000 Mbit/s), EtherNet/IP, PROFINET, CAN, RS-232, RS-422, FTP, HTTP |
Starting price | From USD 7,300 |
Detailed Technical Data
2D snapshot vision sensor
CMOS matrix sensor, grayscale
1,600 x 1,088 px (1.7 MP)
40 Hz
C-mount, 2/3 inch optical format
IP65
635 g
142 x 90 x 46 mm
24 V DC
Programmable with SICK AppStudio
Design and Build Quality
The InspectorP64x is a 2D snapshot vision sensor made by SICK. Published build data: IP65.
Integration and Compatibility
The InspectorP64x is connected to the robot or line controller through its published interfaces: Ethernet TCP/IP (10/100/1,000 Mbit/s), EtherNet/IP, PROFINET, CAN, RS-232, RS-422, FTP and HTTP. Confirm mechanical and software compatibility with your robot model before ordering.
SICK InspectorP64x Applications and Use Cases
The SICK InspectorP64x is a programmable 2D vision sensor with a 1.7 MP CMOS imager (1,600 x 1,088 px) and a frame rate of 40 Hz. It is used in the automotive, electronics, metalworking, plastics, food and beverage, pharmaceuticals and logistics industries.
The right configuration depends on the part, the cycle time and the robot or line it works with, so confirm it with the supplier.
SICK InspectorP64x Price and Value
The SICK InspectorP64x is listed from USD 7,300 on All Things Cobots. Mounting kits, cabling, software options and integration affect the final price and are quoted separately. Prices are indicative, are not final and may change.
Pros and Cons
Pros
IP65
Wide choice of communication interfaces
Cons
Compatibility with the robot and controller must be confirmed before ordering
Mounting, cabling and integration are quoted separately
Who Should Buy the SICK InspectorP64x?
The SICK InspectorP64x fits manufacturers and integrators who need machine vision for inspection, identification or guidance.
See the full SICK InspectorP64x product listing on All Things Cobots.
SICK InspectorP64x FAQ
How much does the SICK InspectorP64x cost?
The SICK InspectorP64x is listed from USD 7,300 on All Things Cobots. The price is indicative and may change, and it does not include installation or integration.
What is the SICK InspectorP64x?
The SICK InspectorP64x is a programmable 2D vision sensor with a 1.7 MP CMOS imager (1,600 x 1,088 px) and a frame rate of 40 Hz.
Is the SICK InspectorP64x compatible with my robot?
Compatibility depends on the robot flange, payload and controller interface. Confirm it with the supplier before ordering.
Which interfaces does the SICK InspectorP64x support?
Published interfaces are Ethernet TCP/IP (10/100/1,000 Mbit/s), EtherNet/IP, PROFINET, CAN, RS-232, RS-422, FTP and HTTP.
Specifications and prices are based on manufacturer and distributor information. Prices are indicative, are not final and may change.
