Mitsubishi Electric FR-A800-E and FR-F800-E Ethernet VFDs Review: Specs, Price and Applications
FR-A800-E and FR-F800-E add standard Ethernet to their respective Mitsubishi inverter families. The manufacturer release describes CC-Link IE Field, Modbus/TCP, diagnostics and onboard PLC functions. Keep the two families and actual electrical configurations separately identified rather than treating them as one universal drive.
Quick Verdict
Consider the Ethernet-equipped drive when its motor control and plant interface fit the duty. Select the process and load before communication convenience. A network connector does not make industrial Ethernet protocols interchangeable or establish coordinated servo performance.
Mitsubishi Electric FR-A800-E and FR-F800-E Ethernet VFDs at a Glance
Specification | Details |
Products | FR-A800-E and FR-F800-E |
Connectivity | Standard Ethernet in reviewed E-family scope |
Release protocols | CC-Link IE Field and Modbus/TCP |
Applications | Industrial machinery, pumps and process monitoring |
Local logic | Applicable onboard PLC functionality |
Selection | Input, current, overload, enclosure and interface by model |
Price | Request a quote for actual drive/options |
Design and Engineering Assessment
The A and F families address different documented motor-control and application requirements. Do not assume identical overload, tuning or process functions because both have an Ethernet connection.
Plant monitoring and synchronized servo control are different jobs. Useful diagnostics or energy data can be available without a high-bandwidth multi-axis architecture. Specify actual exchanged commands, data and host timing.
Onboard logic may remove selected external tasks in an appropriate application. It does not remove interlocks, command ownership or a controlled backup. Define the motor’s response to network loss and interrupted supply.
Electrical and Host Integration
Confirm supply, motor data, cable length, bonding and needed filtering or braking. Apply actual overload and thermal derating.
Map the supported protocol, addresses, diagnostics and command ownership. Ethernet does not itself provide a secure remote-access architecture.
Validate Process Recovery
Commission direction, motor parameters and process limits before loaded warm duty. Test communications loss and required restart behavior.
Save model, firmware, parameters, local program and host mapping. Replacement must match both electrical duty and supported communications.
Applications and Selection
Industrial motor and pump/process installations requiring a specified Ethernet VFD.
For Mitsubishi Electric FR-A800-E and FR-F800-E Ethernet VFDs, define the actual machine duty before selecting an ordering configuration. Include the required operating point, available installation space, environment and control interfaces. The specification table describes the product or family; the surrounding machine determines which of those features matters for the intended job.
Price and Value
Price: Request a quote for the exact configuration. Compare the product, compatible control equipment, required mechanical parts, cabling and commissioning as one installed system. A component price alone does not represent the cost of a working automation axis.
Evaluate an alternative against the same duty and acceptance criteria. Match the continuous operating requirement first, then compare transient capability, feedback, mechanical fit and support. This avoids choosing between superficially similar products whose ratings describe different operating conditions.
Pros and Cons
Advantages
Ethernet-equipped inverter families
Plant monitoring and host integration
Applicable onboard logic
Limitations
A and F family limits differ
Networking is not servo synchronization
Installation and recovery are application-specific
Who Should Consider Mitsubishi Electric FR-A800-E and FR-F800-E Ethernet VFDs?
Consider Mitsubishi Electric FR-A800-E and FR-F800-E Ethernet VFDs for industrial motor and pump/process installations requiring a specified Ethernet VFD. Establish the required operating point and installation interfaces before choosing the configuration, and use a representative loaded cycle as the acceptance basis.
Mitsubishi Electric FR-A800-E and FR-F800-E Ethernet VFDs FAQ
What does E identify here?
The reviewed Ethernet-equipped FR-A800-E and FR-F800-E scope.
Are A and F identical?
No. Select by actual motor-control and duty requirements.
Are Ethernet protocols interchangeable?
No. Match the supported host protocol.
Does monitoring make this a multi-axis servo?
No. Those are different control functions.
Can local logic replace every machine controller?
Only the actual supported application can establish that.
What matters for motor wiring?
Voltage/current, cable length, insulation, bonding and filtering.
What should acceptance measure?
Loaded process duty, temperature, commands and required recovery.
What belongs in the backup?
Model/firmware, parameters, onboard program and host map.
Prices are indicative and may change. Confirm the final configuration, commercial terms and delivery schedule before ordering.
