FANUC M-710iC/70 vs ABB IRB 5710: 70 kg Robot Comparison
Updated: 9 hours ago
IN A NUTSHELL
🔎 THE KEY DIFFERENCE This comparison includes family-level ranges: FANUC M-710iC/70 lists 70 kg and 2050 mm, while ABB IRB 5710 lists 70–110 kg and 2300–2700 mm. Select an exact variant; maximum payload and maximum reach from different versions cannot be combined. |
→ CONSIDER FANUC M-710iC/70 Consider it when its named configuration already meets the actual load and workspace requirements. This article compares 70 kg with a published reach of 2050 mm; include the gripper and part in the load. |
→ CONSIDER ABB IRB 5710 Consider it when an exact variant in this family meets the complete tool load and required workspace. This article compares 70–110 kg with a published reach of 2300–2700 mm; include the gripper and part in the load. |
💡 THE TAKEAWAY Choose exact order codes before comparing capacity or price. Confirm the selected variant’s payload and reach together, then validate the real tool, movement path and controls against the same acceptance test. |
The FANUC M-710iC/70 and the ABB IRB 5710 both start at 70 kg. The IRB 5710 reaches further, offers versions up to 110 kg and costs about 15% less. The M-710iC/70 is a proven arm in FANUC plants, with the same ±0.04 mm repeatability as the best IRB 5710 versions.
Quick verdict. The ABB IRB 5710 is the better choice for most new 70 kg projects, with 2300 or 2700 mm reach, versions up to 110 kg and a listed price $12,000 lower. The FANUC M-710iC/70 is the better choice for plants standardized on FANUC that need 70 kg over 2050 mm.
M-710iC/70 and IRB 5710 at a glance
The FANUC M-710iC/70 carries 70 kg over 2050 mm, repeats to ±0.04 mm, weighs 560 kg and runs on the R-30iB Plus series controller.
The ABB IRB 5710 carries 70 to 110 kg over 2300 or 2700 mm, repeats to ±0.04–0.05 mm and runs on OmniCore.
Main specification comparison
Specification | FANUC M-710iC/70 | ABB IRB 5710 |
Brand | FANUC | ABB |
Listed price | $82,000 | $70,000 |
Payload | 70 kg | 70–110 kg |
Reach | 2050 mm | 2300–2700 mm |
Repeatability | ±0.04 mm | ±0.04–0.05 mm |
Axes | 6 | 6 |
Arm weight | 560 kg | Not specified |
Controller | R-30iB Plus series | ABB OmniCore |
Price comparison
FANUC M-710iC/70: listed from $82,000
ABB IRB 5710: listed from $70,000
Difference: $12,000
The IRB 5710 costs roughly 15% less
Reach and payload
The IRB 5710 reaches 2300 or 2700 mm, at least 250 mm beyond the 2050 mm of the M-710iC/70. Its versions run from 70 to 110 kg, so one robot family covers heavier grippers and parts. The M-710iC/70 is the high-payload arm of the M-710iC series.
Applications and precision
ABB designs the IRB 5710 for material handling, machine tending and high-precision assembly in EV battery production, automotive and general industry. FANUC positions the M-710iC/70 for material handling, machine tending and assembly. Both publish ±0.04 mm at their best.
Installation and controllers
The M-710iC/70 weighs 560 kg and mounts on the floor, at an angle or inverted, on the R-30iB Plus series controller. ABB runs the IRB 5710 on the newer OmniCore controller.
Best applications for the M-710iC/70
Machine tending up to 70 kg
Material handling
Plants standardized on FANUC
Best applications for the ABB IRB 5710
EV battery assembly
Machine tending up to 110 kg
Automotive handling
M-710iC/70 advantages
±0.04 mm repeatability
Flexible mounting
M-710iC/70 limitations
About $12,000 higher listed price
2050 mm reach
ABB IRB 5710 advantages
About 15% lower listed price
70 to 110 kg versions
Up to 2700 mm reach
ABB IRB 5710 limitations
OmniCore only
Final verdict
Choose the ABB IRB 5710 for reach, payload range and price. Choose the FANUC M-710iC/70 for FANUC-standardized plants.
Sources and further reading
Frequently asked questions
Which is cheaper, the FANUC M-710iC/70 or the ABB IRB 5710?
The IRB 5710 is listed from $70,000 and the M-710iC/70 from $82,000, a difference of $12,000.
Which robot has the longer reach?
The IRB 5710 reaches 2300 or 2700 mm; the M-710iC/70 2050 mm.
Which robot carries more?
The IRB 5710 comes in versions up to 110 kg; the M-710iC/70 carries 70 kg.
Which robot is more precise?
Both publish ±0.04 mm at their best; some IRB 5710 versions are ±0.05 mm.
Which controller does each use?
The M-710iC/70 uses the R-30iB Plus series; the IRB 5710 uses OmniCore.
Which robot should I buy?
Choose the IRB 5710 for most new projects. Choose the M-710iC/70 for FANUC plants.
