FANUC M-710iC/70 Review: Specs, Price and Applications of the 70 kg Industrial Robot
Updated: 2 days ago
The FANUC M-710iC/70 is a 6-axis industrial robot with a maximum payload of 70 kg, a reach of 2050 mm and ±0.04 mm repeatability, listed from USD 82,000. This review covers its full specifications, design, programming options, applications and price, so you can decide whether it fits your automation project.
Quick Verdict
The FANUC M-710iC/70 is a 6-axis industrial robot with a 70 kg payload, a 2050 mm reach and a repeatability of ±0.04 mm. It is the higher-payload arm in the M-710iC series, designed for material handling, machine tending and assembly. The arm weighs 560 kg, can be mounted on the floor, at an angle or inverted, and runs on the FANUC R-30iB Plus series controller. It is listed from USD 82,000.
FANUC M-710iC/70 at a Glance
Maximum payload: 70 kg
Reach: 2050 mm
Axes: 6
Repeatability: ±0.04 mm
Weight: 560 kg
Controller: R-30iB Plus series
Price: from USD 82,000
FANUC M-710iC/70 Technical Specifications
The table below lists the published specifications of the FANUC M-710iC/70.
Specification | FANUC M-710iC/70 |
Manufacturer | FANUC |
Model | M-710iC/70 |
Robot type | 6-axis industrial robot |
Maximum payload | 70 kg |
Reach | 2050 mm |
Axes | 6 |
Repeatability | ±0.04 mm |
Controller | R-30iB Plus series |
Interfaces | EtherNet/IP, PROFINET, EtherCAT, DeviceNet, CC-Link, CC-Link IE Field, PROFIBUS, FL-net, Modbus, OPC UA |
Certifications | PL e, Cat. 4, SIL 3 emergency stop function, PL d, Cat. 3, SIL 2 position/speed check function |
Starting price | From USD 82,000 |
Detailed Technical Data
6 controlled axes
Max. wrist payload 70 kg
Horizontal reach 2050 mm
Repeatability ±0.04 mm
Mass 560 kg
Installation floor, angle or inverted
Controller R-30iB Plus series
Design and Build Quality
The M-710iC/70 belongs to the FANUC M-710iC series. Published build data: mass 560 kg; installation floor, angle or inverted.
Programming and Software
Teach Pendant and ROBOGUIDE
The M-710iC/70 runs on the R-30iB Plus series controller and is programmed from the FANUC teach pendant. FANUC's ROBOGUIDE software is available for offline programming and cell simulation.
Industrial Communication
Published interfaces are EtherNet/IP, PROFINET, EtherCAT, DeviceNet, CC-Link, CC-Link IE Field, PROFIBUS, FL-net, Modbus and OPC UA.
FANUC M-710iC/70 Applications and Use Cases
Typical applications for the M-710iC/70 are material handling, machine tending, assembly, packaging, inspection and dispensing.
Material handling
A 70 kg maximum payload and a 2050 mm reach let the M-710iC/70 move parts between stations, fixtures and conveyors.
Machine tending
The M-710iC/70 loads and unloads machine tools, presses and moulding machines within its 2050 mm reach.
Assembly
Repeatability of ±0.04 mm supports fitting, inserting and fastening parts in assembly cells.
FANUC M-710iC/70 Price and Value
The FANUC M-710iC/70 is listed from USD 82,000 on All Things Cobots. The controller, end effectors, safety equipment and integration affect the final price and are quoted separately. Prices are indicative, are not final and may change.
Pros and Cons
Pros
70 kg maximum payload with a 2050 mm reach
±0.04 mm repeatability
Several installation options: floor, angle or inverted
Wide choice of industrial fieldbus interfaces
Cons
Needs safety fencing or equivalent safeguarding
The 70 kg maximum payload includes the end effector
End effectors, safety equipment and integration are quoted separately
Who Should Buy the FANUC M-710iC/70?
The FANUC M-710iC/70 fits manufacturers that need an industrial robot of this size for handling, machine tending and assembly.
See the full FANUC M-710iC/70 product listing on All Things Cobots.
FANUC M-710iC/70 FAQ
How much does the FANUC M-710iC/70 cost?
The FANUC M-710iC/70 is listed from USD 82,000 on All Things Cobots. The price is indicative and may change, and it does not include end effectors, safety equipment or integration.
What is the payload and reach of the FANUC M-710iC/70?
The M-710iC/70 has a maximum payload of 70 kg and a reach of 2050 mm.
How accurate is the FANUC M-710iC/70?
Its published repeatability is ±0.04 mm.
How many axes does the FANUC M-710iC/70 have?
The M-710iC/70 has 6 axes.
How is the FANUC M-710iC/70 programmed?
It is programmed from the FANUC teach pendant, and ROBOGUIDE is available for offline programming and simulation.
Which controller does the FANUC M-710iC/70 use?
It runs on the R-30iB Plus series controller.
How much does the FANUC M-710iC/70 weigh?
Published mass 560 kg.
How can the FANUC M-710iC/70 be mounted?
Published installation options: floor, angle or inverted.
What is the FANUC M-710iC/70 used for?
Typical applications are material handling, machine tending, assembly, packaging, inspection and dispensing.
Specifications and prices are based on manufacturer and distributor information. Prices are indicative, are not final and may change.
