FANUC M-710iC/45M vs Yaskawa GP50: Robot Comparison
The FANUC M-710iC/45M and the Yaskawa Motoman GP50 weigh the same 570 kg but trade reach for payload. The M-710iC/45M reaches 2606 mm with 45 kg. The GP50 carries 50 kg over 2061 mm at ±0.03 mm and is listed about 44% lower.
Quick verdict. The Yaskawa GP50 is the better value for 50 kg handling and machine tending within 2 m, with ±0.03 mm and a listed price $35,000 lower. The FANUC M-710iC/45M is the better choice when the cell needs 2.6 m of reach.
M-710iC/45M and GP50 at a glance
The FANUC M-710iC/45M carries 45 kg over 2606 mm, repeats to ±0.06 mm, weighs 570 kg and runs on the R-30iB Plus series controller. FANUC positions it as the long-reach member of the M-710iC series.
The Yaskawa Motoman GP50 carries 50 kg over 2061 mm, repeats to ±0.03 mm, weighs 570 kg and runs on the YRC1000 controller.
Main specification comparison
Specification | FANUC M-710iC/45M | Yaskawa Motoman GP50 |
Brand | FANUC | Yaskawa Motoman |
Listed price | $80,000 | $45,000 |
Payload | 45 kg | 50 kg |
Reach | 2606 mm | 2061 mm |
Repeatability | ±0.06 mm | ±0.03 mm |
Axes | 6 | 6 |
Arm weight | 570 kg | 570 kg |
Controller | R-30iB Plus series | YRC1000 |
Price comparison
FANUC M-710iC/45M: listed from $80,000
Yaskawa GP50: listed from $45,000
Difference: $35,000
The GP50 costs roughly 44% less
Reach against payload
The M-710iC/45M reaches 2606 mm, about 545 mm beyond the 2061 mm of the GP50, which suits large work areas and multi-machine tending. The GP50 carries 50 kg, 5 kg more, for heavier grippers and parts.
Precision
Yaskawa publishes ±0.03 mm for the GP50, twice as tight as the ±0.06 mm of the M-710iC/45M. For precise loading into fixtures and machines, the GP50 holds tighter positions.
Installation and controllers
Both arms weigh 570 kg. The M-710iC/45M mounts on the floor, at an angle or inverted on the R-30iB Plus series. The GP50 installs on the floor, wall, ceiling or tilted and runs on the YRC1000.
Best applications for the M-710iC/45M
Large-area handling
Multi-machine tending
FANUC-standardized lines
Best applications for the Yaskawa GP50
50 kg machine tending
Heavy part handling
Assembly
M-710iC/45M advantages
2606 mm reach
M-710iC/45M limitations
About $35,000 higher listed price
±0.06 mm repeatability
Yaskawa GP50 advantages
About 44% lower listed price
50 kg payload
±0.03 mm repeatability
Yaskawa GP50 limitations
2061 mm reach
Final verdict
Choose the Yaskawa GP50 for value and precision. Choose the FANUC M-710iC/45M for reach.
Sources and further reading
Frequently asked questions
Which is cheaper, the FANUC M-710iC/45M or the Yaskawa GP50?
The GP50 is listed from $45,000 and the M-710iC/45M from $80,000, a difference of $35,000.
Which robot has the longer reach?
The M-710iC/45M reaches 2606 mm; the GP50 2061 mm.
Which robot carries more?
The GP50 carries 50 kg; the M-710iC/45M 45 kg.
Which robot is more precise?
The GP50 publishes ±0.03 mm and the M-710iC/45M ±0.06 mm.
Do they weigh the same?
Yes, 570 kg each.
Which robot should I buy?
Choose the GP50 for value. Choose the M-710iC/45M for reach.
