FANUC M-710iC/45M Review: Specs, Price and Applications of the 45 kg Industrial Robot
Updated: 7 days ago
The FANUC M-710iC/45M is a 6-axis industrial robot with a maximum payload of 45 kg, a reach of 2606 mm and ±0.06 mm repeatability, listed from USD 80,000. This review covers its full specifications, design, programming options, applications and price, so you can decide whether it fits your automation project.
Quick Verdict
The FANUC M-710iC/45M is a 6-axis industrial robot with a 45 kg payload, a 2606 mm reach and a repeatability of ±0.06 mm. It is the long-reach member of the M-710iC series, designed for handling and machine tending over large work areas. The arm weighs 570 kg, can be mounted on the floor, at an angle or inverted, and runs on the FANUC R-30iB Plus series controller. It is listed from USD 80,000.
FANUC M-710iC/45M at a Glance
Maximum payload: 45 kg
Reach: 2606 mm
Axes: 6
Repeatability: ±0.06 mm
Weight: 570 kg
Controller: R-30iB Plus series
Price: from USD 80,000
FANUC M-710iC/45M Technical Specifications
The table below lists the published specifications of the FANUC M-710iC/45M.
Specification | FANUC M-710iC/45M |
Manufacturer | FANUC |
Model | M-710iC/45M |
Robot type | 6-axis industrial robot |
Maximum payload | 45 kg |
Reach | 2606 mm |
Axes | 6 |
Repeatability | ±0.06 mm |
Controller | R-30iB Plus series |
Interfaces | EtherNet/IP, PROFINET, EtherCAT, DeviceNet, CC-Link, CC-Link IE Field, PROFIBUS, FL-net, Modbus, OPC UA |
Certifications | PL e, Cat. 4, SIL 3 emergency stop function, PL d, Cat. 3, SIL 2 position/speed check function |
Starting price | From USD 80,000 |
Detailed Technical Data
6 controlled axes
Max. wrist payload 45 kg
Horizontal reach 2606 mm
Repeatability ±0.06 mm
Mass 570 kg
Installation floor, angle or inverted
Controller R-30iB Plus series
Design and Build Quality
The M-710iC/45M belongs to the FANUC M-710iC series. Published build data: mass 570 kg; installation floor, angle or inverted.
Programming and Software
Teach Pendant and ROBOGUIDE
The M-710iC/45M runs on the R-30iB Plus series controller and is programmed from the FANUC teach pendant. FANUC's ROBOGUIDE software is available for offline programming and cell simulation.
Industrial Communication
Published interfaces are EtherNet/IP, PROFINET, EtherCAT, DeviceNet, CC-Link, CC-Link IE Field, PROFIBUS, FL-net, Modbus and OPC UA.
FANUC M-710iC/45M Applications and Use Cases
Typical applications for the M-710iC/45M are material handling, machine tending, assembly, packaging, inspection and dispensing.
Material handling
A 45 kg maximum payload and a 2606 mm reach let the M-710iC/45M move parts between stations, fixtures and conveyors.
Machine tending
The M-710iC/45M loads and unloads machine tools, presses and moulding machines within its 2606 mm reach.
Assembly
Repeatability of ±0.06 mm supports fitting, inserting and fastening parts in assembly cells.
FANUC M-710iC/45M Price and Value
The FANUC M-710iC/45M is listed from USD 80,000 on All Things Cobots. The controller, end effectors, safety equipment and integration affect the final price and are quoted separately. Prices are indicative, are not final and may change.
Pros and Cons
Pros
45 kg maximum payload with a 2606 mm reach
±0.06 mm repeatability
Several installation options: floor, angle or inverted
Wide choice of industrial fieldbus interfaces
Cons
Needs safety fencing or equivalent safeguarding
The 45 kg maximum payload includes the end effector
End effectors, safety equipment and integration are quoted separately
Who Should Buy the FANUC M-710iC/45M?
The FANUC M-710iC/45M fits manufacturers that need an industrial robot of this size for handling, machine tending and assembly.
See the full FANUC M-710iC/45M product listing on All Things Cobots.
FANUC M-710iC/45M FAQ
How much does the FANUC M-710iC/45M cost?
The FANUC M-710iC/45M is listed from USD 80,000 on All Things Cobots. The price is indicative and may change, and it does not include end effectors, safety equipment or integration.
What is the payload and reach of the FANUC M-710iC/45M?
The M-710iC/45M has a maximum payload of 45 kg and a reach of 2606 mm.
How accurate is the FANUC M-710iC/45M?
Its published repeatability is ±0.06 mm.
How many axes does the FANUC M-710iC/45M have?
The M-710iC/45M has 6 axes.
How is the FANUC M-710iC/45M programmed?
It is programmed from the FANUC teach pendant, and ROBOGUIDE is available for offline programming and simulation.
Which controller does the FANUC M-710iC/45M use?
It runs on the R-30iB Plus series controller.
How much does the FANUC M-710iC/45M weigh?
Published mass 570 kg.
How can the FANUC M-710iC/45M be mounted?
Published installation options: floor, angle or inverted.
What is the FANUC M-710iC/45M used for?
Typical applications are material handling, machine tending, assembly, packaging, inspection and dispensing.
Specifications and prices are based on manufacturer and distributor information. Prices are indicative, are not final and may change.
