FANUC M-10iD/10L vs ABB IRB 2600ID: Robot Comparison
The FANUC M-10iD/10L and the ABB IRB 2600ID are both mid-size robots used for arc welding and handling. The M-10iD/10L carries 10 kg over 1636 mm and costs about a quarter less. The IRB 2600ID offers 8 kg over 2000 mm or 15 kg over 1850 mm, with tighter repeatability and cables inside the upper arm.
Quick verdict. The FANUC M-10iD/10L is the value choice for welding, sealing and handling up to 10 kg, with a listed price $15,000 lower. The ABB IRB 2600ID is the better choice when you need more reach or payload, with up to 2000 mm or 15 kg and ±0.023–0.026 mm repeatability.
M-10iD/10L and IRB 2600ID at a glance
The FANUC M-10iD/10L carries 10 kg over 1636 mm, repeats to ±0.03 mm, weighs 150 kg and runs on the R-30iB Plus or R-30iB Mate Plus controller.
The ABB IRB 2600ID comes as the 15 kg / 1850 mm version or the 8 kg / 2000 mm version, repeats to ±0.023–0.026 mm and runs on IRC5.
Main specification comparison
Specification | FANUC M-10iD/10L | ABB IRB 2600ID |
Brand | FANUC | ABB |
Listed price | $40,000 | $55,000 |
Payload | 10 kg | 8–15 kg |
Reach | 1636 mm | 1850–2000 mm |
Repeatability | ±0.03 mm | ±0.023–0.026 mm |
Axes | 6 | 6 |
Arm weight | 150 kg | Not specified |
Controller | R-30iB Plus (A- or B-cabinet) or R-30iB Mate Plus | ABB IRC5 |
Price comparison
FANUC M-10iD/10L: listed from $40,000
ABB IRB 2600ID: listed from $55,000
Difference: $15,000
The M-10iD/10L costs roughly 27% less
Payload and reach
The IRB 2600ID gives a choice: 15 kg over 1850 mm or 8 kg over 2000 mm. The M-10iD/10L sits between them at 10 kg over 1636 mm. For a 10 kg torch package or gripper within 1.6 m, the FANUC covers the job; for more reach or heavier tooling, the ABB has the margin.
Processes and precision
FANUC lists handling, assembly, arc welding, sealing, mold handling and deburring for the M-10iD/10L. ABB positions the IRB 2600ID for arc welding and material handling in dense cells, with cables and hoses inside the upper arm. ABB publishes ±0.023 to ±0.026 mm repeatability, against ±0.03 mm for the M-10iD/10L.
Installation and controllers
The M-10iD/10L weighs 150 kg, mounts on the floor, upside-down or at an angle, and runs on the R-30iB Plus (A- or B-cabinet) or R-30iB Mate Plus. ABB runs the IRB 2600ID on IRC5.
Best applications for the FANUC M-10iD/10L
Arc welding and sealing
Handling up to 10 kg
Mold handling and deburring
Best applications for the ABB IRB 2600ID
Arc welding in dense cells
Handling up to 15 kg
Long-reach welding up to 2000 mm
FANUC M-10iD/10L advantages
About 27% lower listed price
Wide process range
FANUC M-10iD/10L limitations
10 kg payload
1636 mm reach
ABB IRB 2600ID advantages
Up to 15 kg or 2000 mm
±0.023–0.026 mm repeatability
Integrated dressing
ABB IRB 2600ID limitations
About $15,000 higher listed price
Final verdict
Choose the FANUC M-10iD/10L for welding and handling up to 10 kg at a lower price. Choose the ABB IRB 2600ID for more reach, more payload and tighter precision.
Sources and further reading
Frequently asked questions
Which is cheaper, the FANUC M-10iD/10L or the ABB IRB 2600ID?
The M-10iD/10L is listed from $40,000 and the IRB 2600ID from $55,000, a difference of $15,000.
Which robot carries more?
The IRB 2600ID carries up to 15 kg; the M-10iD/10L 10 kg.
Which robot has the longer reach?
The IRB 2600ID reaches up to 2000 mm; the M-10iD/10L 1636 mm.
Which robot is more precise?
The IRB 2600ID publishes ±0.023 to ±0.026 mm and the M-10iD/10L ±0.03 mm.
Can both robots weld?
Yes. Both are used for arc welding.
Which robot should I buy?
Choose the M-10iD/10L for value. Choose the IRB 2600ID for reach and payload.
