FANUC M-10iD/10L vs ABB IRB 2600: Mid-Size Robot Comparison
The FANUC M-10iD/10L and the ABB IRB 2600 cover almost the same reach. The M-10iD/10L carries 10 kg over 1636 mm, repeats a little more tightly and costs about 20% less. The IRB 2600 carries 12 or 20 kg over 1650 or 1850 mm.
Quick verdict. The FANUC M-10iD/10L is the value choice for handling, welding and sealing up to 10 kg, with ±0.03 mm repeatability and a listed price $10,000 lower. The ABB IRB 2600 is the better choice when grippers and parts exceed 10 kg, with 12 or 20 kg versions.
M-10iD/10L and IRB 2600 at a glance
The FANUC M-10iD/10L carries 10 kg over 1636 mm, repeats to ±0.03 mm, weighs 150 kg and runs on the R-30iB Plus or R-30iB Mate Plus controller.
The ABB IRB 2600 carries 12 or 20 kg over 1650 or 1850 mm, repeats to ±0.04 mm and runs on IRC5 or OmniCore.
Main specification comparison
Specification | FANUC M-10iD/10L | ABB IRB 2600 |
Brand | FANUC | ABB |
Listed price | $40,000 | $50,000 |
Payload | 10 kg | 12–20 kg |
Reach | 1636 mm | 1650–1850 mm |
Repeatability | ±0.03 mm | ±0.04 mm |
Axes | 6 | 6 |
Arm weight | 150 kg | Not specified |
Controller | R-30iB Plus (A- or B-cabinet) or R-30iB Mate Plus | ABB IRC5 or OmniCore |
Price comparison
FANUC M-10iD/10L: listed from $40,000
ABB IRB 2600: listed from $50,000
Difference: $10,000
The M-10iD/10L costs roughly 20% less
Payload and reach
The M-10iD/10L reaches 1636 mm, only 14 mm short of the base IRB 2600. The IRB 2600 carries 12 kg, 2 kg more, and its 20 kg version suits heavier grippers and parts. If the load stays under 10 kg, the two cover the same envelope.
Processes and precision
FANUC lists handling, assembly, arc welding, sealing, mold handling and deburring for the M-10iD/10L, and publishes ±0.03 mm repeatability against ±0.04 mm for the IRB 2600. ABB uses the IRB 2600 for machine tending, material handling and arc welding.
Installation and controllers
The M-10iD/10L weighs 150 kg, mounts on the floor, upside-down or at an angle, and runs on the R-30iB Plus (A- or B-cabinet) or R-30iB Mate Plus. ABB runs the IRB 2600 on IRC5 or OmniCore.
Best applications for the FANUC M-10iD/10L
Handling up to 10 kg
Arc welding and sealing
Mold handling and deburring
Best applications for the ABB IRB 2600
Machine tending up to 20 kg
Material handling
Arc welding
FANUC M-10iD/10L advantages
About 20% lower listed price
±0.03 mm repeatability
Wide process range
FANUC M-10iD/10L limitations
10 kg payload
ABB IRB 2600 advantages
12 or 20 kg versions
Up to 1850 mm reach
ABB IRB 2600 limitations
About $10,000 higher listed price
Final verdict
Choose the FANUC M-10iD/10L for loads up to 10 kg at a lower price. Choose the ABB IRB 2600 for heavier parts.
Sources and further reading
Frequently asked questions
Which is cheaper, the FANUC M-10iD/10L or the ABB IRB 2600?
The M-10iD/10L is listed from $40,000 and the IRB 2600 from $50,000, a difference of $10,000.
Which robot carries more?
The IRB 2600 carries 12 or 20 kg; the M-10iD/10L 10 kg.
Which robot has the longer reach?
The IRB 2600 reaches 1650 or 1850 mm; the M-10iD/10L 1636 mm.
Which robot is more precise?
The M-10iD/10L publishes ±0.03 mm and the IRB 2600 ±0.04 mm.
Can the M-10iD/10L weld?
Yes. FANUC lists arc welding, sealing, handling, assembly, mold handling and deburring.
Which robot should I buy?
Choose the M-10iD/10L for value up to 10 kg. Choose the IRB 2600 for heavier parts.
