FANUC CRX-5iA vs DENSO COBOTTA PRO 900: 5–6 kg Cobot Comparison
Updated: 12 hours ago
IN A NUTSHELL
🔎 THE KEY DIFFERENCE This is a load-versus-reach trade-off: DENSO COBOTTA PRO 900 has the higher stated load capacity, while FANUC CRX-5iA has the longer stated reach. Start with the constraint your task actually has. |
→ CONSIDER FANUC CRX-5iA Consider it when reaching farther matters more than the higher payload of the alternative. This article compares 5 kg with a published reach of 994 mm; include the gripper and part in the load. |
→ CONSIDER DENSO COBOTTA PRO 900 Consider it when additional load capacity matters more than extra reach. This article compares 6 kg with a published reach of 900 mm; include the gripper and part in the load. |
💡 THE TAKEAWAY Check the real tool, movement path and safety assessment before choosing. A collaborative label does not make every task safe without guarding; compare complete installation quotes. |
The FANUC CRX-5iA and the DENSO COBOTTA PRO 900 both repeat to ±0.03 mm. The COBOTTA PRO 900 carries 6 kg, 1 kg more, and is listed about 19% lower. The CRX-5iA is 4 kg lighter and rated IP67.
Quick verdict. The DENSO COBOTTA PRO 900 is the better value for fast collaborative assembly in dry cells, with 6 kg and a listed price $8,200 lower. The FANUC CRX-5iA is the better choice for coolant-exposed tending, a lighter arm and FANUC plants.
CRX-5iA and COBOTTA PRO 900 at a glance
The FANUC CRX-5iA carries 5 kg over 994 mm, repeats to ±0.03 mm, weighs 25 kg, is rated IP67 and runs on the R-30iB Mini Plus controller. FANUC lists 1000 mm/s in collaborative mode and 2000 mm/s in high-speed mode.
The DENSO COBOTTA PRO 900 carries 6 kg with a 900 mm arm length (1066 mm maximum reach), repeats to ±0.03 mm, weighs 29 kg, is rated IP54 and lists 2100 mm/s maximum TCP speed in non-collaborative operation, on the RC9 controller.
Main specification comparison
Specification | FANUC CRX-5iA | DENSO COBOTTA PRO 900 |
Brand | FANUC | DENSO |
Listed price | $43,200 | $35,000 |
Payload | 5 kg | 6 kg |
Reach | 994 mm | 900 mm |
Repeatability | ±0.03 mm | ±0.03 mm |
Axes | 6 | 6 |
Speed | 1000 mm/s (collaborative mode); 2000 mm/s (high-speed mode) | Max. TCP speed 2,100 mm/s |
Arm weight | 25 kg | 29 kg |
IP rating | IP67 | IP54 |
Controller | R-30iB Mini Plus | DENSO RC9 |
Price comparison
FANUC CRX-5iA: listed from $43,200
DENSO COBOTTA PRO 900: listed from $35,000
Difference: $8,200
The COBOTTA PRO 900 costs roughly 19% less
Payload, reach and precision
The COBOTTA PRO 900 carries 6 kg against 5 kg. FANUC rates the CRX-5iA at 994 mm; DENSO gives a 900 mm arm length and 1066 mm maximum reach, so the envelopes overlap. Both publish ±0.03 mm, so precision does not separate them.
Protection and weight
FANUC rates the CRX-5iA IP67 for the body, wrist and J3 arm; DENSO rates the COBOTTA PRO IP54. The CRX-5iA weighs 25 kg, 4 kg less than the 29 kg COBOTTA PRO 900, which helps on carts and light tables.
Programming and controllers
The CRX-5iA uses drag-and-drop tablet programming and hand guiding on the R-30iB Mini Plus. The COBOTTA PRO 900 runs on DENSO's RC9 controller with direct teaching and lists 2100 mm/s outside collaborative operation.
Best applications for the CRX-5iA
Machine tending near coolant
Cart-mounted cells
FANUC-standard plants
Best applications for the COBOTTA PRO 900
Fast collaborative assembly
Small-part handling
Dry inspection cells
CRX-5iA advantages
IP67 protection
25 kg arm
CRX-5iA limitations
About $8,200 higher listed price
5 kg payload
COBOTTA PRO 900 advantages
About 19% lower listed price
6 kg payload
2100 mm/s maximum TCP speed
COBOTTA PRO 900 limitations
IP54 protection
Final verdict
Choose the DENSO COBOTTA PRO 900 for value and assembly speed. Choose the FANUC CRX-5iA for harsh environments and FANUC plants.
Sources and further reading
Frequently asked questions
Which is cheaper, the FANUC CRX-5iA or the DENSO COBOTTA PRO 900?
The COBOTTA PRO 900 is listed from $35,000 and the CRX-5iA from $43,200, a difference of $8,200.
Which cobot carries more?
The COBOTTA PRO 900 carries 6 kg; the CRX-5iA 5 kg.
Which cobot is more precise?
Both publish ±0.03 mm.
Which cobot is better protected?
The CRX-5iA is rated IP67; the COBOTTA PRO 900 IP54.
How heavy are they?
The CRX-5iA weighs 25 kg; the COBOTTA PRO 900 29 kg.
Which cobot should I buy?
Choose the COBOTTA PRO 900 for value. Choose the CRX-5iA for harsh environments.
