Which robot is better for this application?

DOBOT CR12 is the stronger starting point for 12 kg CRA-generation handling within the named 1200 mm working radius, while Doosan M1013 is worth shortlisting for 10 kg handling and force/compliance tasks within the 1300 mm M-series scope. The final choice depends on the real loaded path, required protection, controls and acceptance results. Neither a higher payload nor a longer reach establishes a universal winner.

What payload should I use for the comparison?

Use 12 kg for the specified DOBOT CR12 example and 10 kg for Doosan M1013, subject to all documented load and orientation conditions. Include the tool, adapters, sensors and carried part. Joint torque sensing does not determine finished-part accuracy or approve human contact; validate tool calibration, load limits and the complete task.

Does the stated reach guarantee access to my fixture?

No. The comparison gives 1200 mm for DOBOT CR12 and 1300 mm for Doosan M1013 using the stated model references. Joint limits, reach reference points, wrist orientation, tool length and collisions determine whether the actual fixture is accessible. Simulate the full approach and exit path.

Can I use the best specifications from every family variant?

No. Keep each named model and revision intact. A different arm length, controller generation or protection option can change the relevant specification. Do not combine one version’s maximum payload with another version’s maximum reach.

Is repeatability the same as finished-part accuracy?

No. The stated values are ±0.03 mm for DOBOT CR12 scope and ±0.05 mm for the competitor scope. Finished-part results also depend on fixtures, TCP calibration, sensing, thermal conditions and tool compliance. Validate the actual process instead of treating catalogue repeatability as a complete accuracy guarantee.

How should purchase prices be compared?

Use current written quotations for DOBOT CR12 and Doosan M1013 with the same arm, controller, software, tooling and commissioning scope. This comparison does not represent an ATC sales offer or stock confirmation. Historical review figures are not a substitute for a configuration-specific purchase quotation.

Can these robots operate safely next to people without guarding?

These specifications do not establish a safe unguarded installation. Assess the complete task, tool, load and machine interface, then implement and validate the required safeguarding and operating procedures. Do not infer collaborative operation from a compact arm, limited payload or education setting.

What should an acceptance test compare?

Use the same parts, actual tool load, fixture locations, path and quality criteria for DOBOT CR12 and Doosan M1013. Check production timing, settling, interruptions and recovery. Include the most difficult loaded approach and retreat. Approve the exact delivered configuration and preserve its final settings.