Agile Robots Diana 7 vs DOBOT CR12A: Robot Comparison
Updated: 3 hours ago
IN A NUTSHELL
🔎 THE KEY DIFFERENCE DOBOT CR12A has the higher stated load capacity and longer stated reach. Those figures help shortlist it for heavier loads or wider layouts, but do not prove a faster production cycle. Their 7- and 6-axis mechanisms also offer different movement options. |
→ CONSIDER Agile Robots Diana 7 Consider it when its stated load and reach already cover your task and its controls fit your equipment. This article compares 7 kg and a 923 mm stated reach; include the gripper and part in the load. |
→ CONSIDER DOBOT CR12A Consider it when additional load capacity and reach matter. This article compares 12 kg and a 1,200 mm stated reach; include the gripper and part in the load. |
💡 THE TAKEAWAY Check the required tool angles and approach path: different axis counts change movement options. Choose only after both suppliers demonstrate the loaded task and quote the same complete installation. |
Agile Robots Diana 7 vs DOBOT CR12A is a choice about collaborative handling and cell integration. Agile Robots Diana 7 and DOBOT CR12A differ in their working envelope, loading assumptions and engineering ecosystem. A useful decision starts with the exact mechanism and process, then checks whether either robot can execute the required path with the real tool attached. This comparison separates documented specifications from application-level engineering judgments.
Agile Robots Diana 7 vs DOBOT CR12A: quick verdict
Shortlist Agile Robots Diana 7 for 7 kg collaborative-platform handling within the documented 923 mm working reference. Shortlist DOBOT CR12A for 12 kg CRA-generation handling within the named 1200 mm working radius. Neither is a universal winner: a robot that can carry the load may still fail the fixture-access, controller or maintenance requirements.
The numerical comparison below uses Agile Robots Diana 7 against DOBOT CR12A. The stated model scope matters when comparing later revisions or differently equipped installations. Published repeatability describes return to a taught position under specified conditions; it does not establish complete-cell accuracy or prove a faster production cycle.
Specifications and exact configuration scope
Criterion | Agile Robots Diana 7 | DOBOT CR12A |
|---|---|---|
Comparison configuration | Agile Robots Diana 7 | DOBOT CR12A |
Payload used for comparison | 7 kg | 12 kg |
Reach / motion-area reference | 923 mm | 1200 mm |
Axes | 7 | 6 |
Repeatability for this scope | ±0.05 mm | ±0.03 mm |
Controller reference | Diana 7 control box (483 × 377 × 192 mm, 16 kg, 110-240 VAC, 50/60 Hz) | CC262 for reviewed CRA package |
Purchase-price basis | Configuration-specific quotation | Configuration-specific quotation |
Purchase pricing | From $61,900 (arm list price) | From $27,500 (arm list price) |
Read the reach row together with the geometric notes below. Manufacturers may specify an arm-link sum, a wrist-centre motion area or reach to the flange; those dimensions are not interchangeable. The table does not establish access to every point at every tool angle. Controller references identify reviewed packages, and actual compatibility must be confirmed by model, software version and region.
Agile Robots Diana 7: design and configuration
Diana 7 is a seven-axis collaborative arm with a 7 kg payload, a 923 mm reach and ±0.05 mm repeatability in the reviewed specification. The redundant joint offers an additional posture choice around fixtures. Its joint torque sensing and force-control environment are relevant to contact-rich assembly, but a useful application still needs validated force limits, tooling and a reproducible recovery strategy. Demonstrate the actual teaching and software package supplied with the robot.
DOBOT CR12A: design and configuration
The CR12A is a six-axis collaborative arm with a 12 kg payload, a 1200 mm working radius and ±0.03 mm repeatability in the reviewed CRA specification. It trades some distance against the CR10A for higher nominal capacity. Compare the complete gripper, part and centre-of-gravity model before selecting it for heavier machine tending or handling. Its speed, IP rating and safety-function options describe the named arm and package; they do not certify an entire unguarded application.
For this pair, DOBOT CR12A offers 12 kg over the stated 1200 mm reference, compared with 7 kg and 923 mm for Agile Robots Diana 7 example. DOBOT CR12A has the larger stated distance by 277 mm, but this difference is only a preliminary layout indicator because reference points and joint envelopes can differ. Locate the actual fixture in each manufacturer model before treating this as usable extra working space.
Payload, tooling and a worked load example
Consider an illustrative total wrist load of 5.6 kg: a 1.4 kg tool and adapter package carrying a 4.2 kg part or product group. This arithmetic leaves 1.4 kg below the Agile Robots Diana 7 example’s nominal limit and 6.4 kg below DOBOT CR12A’s nominal limit. These are mass differences, not safety factors or a validated load approval. A heavy camera, valve block or retained material must be included before recalculating the total.
The example exposes the practical question: is the application limited by mass, by tool offset or by wrist rotation? Agile Robots Diana 7 is the lower-or-equal nominal payload choice in this pair. DOBOT CR12A offers more or equal headline mass capacity, but that alone cannot approve an eccentric fixture. Moving the same mass farther from the flange increases the moment, and spreading it increases rotational inertia. Manufacturer load diagrams and the actual centre of gravity govern the final allowable motion.
Model the empty, partly loaded and fully loaded tool states separately. A vacuum layer gripper, a weld torch with hoses or an inspection head may change its effective loading during the cycle. Set the controller’s load data for each supported state and validate the transition logic. A payload table cannot predict acceleration derating, cable pull or transient reactions at a machine interface.
Reach, orientation and fixture access
Build the same cell model for both candidates: base height, machine opening, fixture datum, maximum part size, tool extension and access for maintenance. Agile Robots Diana 7 provides a stated 923 mm reference, while DOBOT CR12A provides 1200 mm. Check the deepest production pose and the return path with the loaded tool. An arm that just touches the target at full extension may have little freedom left to turn, retract or avoid a door.
For assembly and machine tending, test the gripper jaws in their open and closed positions. Include feeder replenishment, rejected-part disposal and tool changes. Check wrist flips and singularity avoidance along the whole path. A compact robot can fit a small fixture well, while a longer arm can simplify station placement; neither geometric benefit can be assumed without the actual model.
Precision and throughput: compare the same task
The comparison uses ±0.05 mm for Agile Robots Diana 7 and ±0.03 mm for DOBOT CR12A. These figures should be read in their documented configuration scope. Repeatability is not absolute accuracy, camera calibration accuracy or finished-part capability. Fixture variation, TCP calibration, thermal conditions and tool compliance can dominate the error at the process point, especially when the tool extends far from the flange.
Ask each integrator to execute the same representative path with the same payload model, tool length, process dwell and stop conditions. Report transfer time, settling time, process time and waiting time separately. Published standard cycles often use different loads and distances; dividing one catalogue cycle by another would not establish the production advantage of Agile Robots Diana 7 over DOBOT CR12A. Use a measured or validated application cycle before assigning a throughput benefit.
Programming, controls and production integration
Agile Robots Diana 7 is paired here with Diana 7 control box (483 × 377 × 192 mm, 16 kg, 110-240 VAC, 50/60 Hz), while DOBOT CR12A uses CC262 for reviewed CRA package. Controller names identify the review baseline rather than a guarantee that all interface options are included. Compare the actual software revision, teaching workflow, diagnostic tools, fieldbus licences and recovery procedures. An existing trained team and reusable production code may outweigh a small dimensional advantage. Obtain a demonstration of the same machine handshake and interrupted-cycle recovery on both platforms.
Specify the PLC handshakes before ordering: cycle request, ready, busy, complete, fault, part present and recovery authorization. Define how an interrupted operation resumes without repeating a dangerous or quality-critical action. Vision, force sensing, fieldbus communication and external-axis coordination must be checked as explicit included or optional functions. An Ethernet connector does not by itself prove that a particular industrial protocol or software interface is licensed and supported.
Configuration and communication detail
Integration reference | Agile Robots Diana 7 | DOBOT CR12A |
|---|---|---|
Control package | Diana 7 control box (483 × 377 × 192 mm, 16 kg, 110-240 VAC, 50/60 Hz) | CC262 for reviewed CRA package |
Documented interface baseline | Specify required interfaces in the delivered package | Specify required interfaces in the delivered package |
Programming baseline | Named platform software and supported API; confirm supplied version | Named platform software and supported API; confirm supplied version |
Integration acceptance | Test the actual machine handshake and controlled recovery | Test the same handshake and controlled recovery |
Protection, installation and maintenance
Match the precise protection package to the process. Standard, protected, cleanroom, foundry and washing configurations can have different seals, services and maintenance requirements. Do not transfer the best optional IP or cleanroom rating to an unprotected base model. Check the controller location, cable bend radius, available lifting access and base reactions with the installer.
Treat safe operation as a property of the complete task and installation. Include the tool, sharp workpiece edges, trapping points, dropped loads and machine access. A collaborative arm does not make an unrestricted-speed application safe. Validate the required speed, force and separation measures with the actual parts. Plan tool replacement and fault recovery without dismantling the whole installation, and include connector access, lubrication and spare-cable replacement in the maintenance layout.
Price and lifecycle value
Published arm list prices: Agile Robots Diana 7 is listed from $61,900 and DOBOT CR12A is listed from $27,500. Request configuration-specific quotations for Agile Robots Diana 7 and DOBOT CR12A. An arm-only number is not the price of a commissioned production cell. Ask for separate line items for controller, pendant, communication options, end effector, safety equipment, installation, acceptance, training and warranty. Price changes, regional support and included software can reverse an apparent hardware-cost advantage. Compare the same delivered scope before calculating payback.
Compare the installed production scope: tool, fixtures, sensing, guarding, machine interface, programming, acceptance and training. For small-parts automation, include feeders, vision calibration, nests and rejected-part handling. Keep purchase cost and recurring support costs separate. No payback figure is defensible until the actual cycle, yield, utilization and installation quotation are known.
Selection and acceptance plan
Decision gate | Agile Robots Diana 7 | DOBOT CR12A |
|---|---|---|
Strongest documented fit | 7 kg collaborative-platform handling within the documented 923 mm working reference | 12 kg CRA-generation handling within the named 1200 mm working radius |
Main boundary | Tool mass, wrist moments and access constrain the headline specification. | Keep base CRA, AS/SafeSkin, torque-sensing and IP68 packages distinct. Robot speed and payload do not certify the complete collaborative task. |
Required approval | Exact Agile Robots variant, tool load and validated process path | Exact competitor revision, tool load and validated process path |
Acceptance evidence | Agreed parts, path, quality and recovery results | The same agreed parts, path, quality and recovery results |
Advance Agile Robots Diana 7 when 7 kg collaborative-platform handling within the documented 923 mm working reference solves the real constraint and its selected configuration passes the load and access checks. Advance DOBOT CR12A when 12 kg CRA-generation handling within the named 1200 mm working radius provides the more suitable process arrangement. Reject either candidate if a mandatory pose, protection requirement or controller function cannot be demonstrated. A purchasing shortlist should preserve these conditions instead of converting a single catalogue advantage into a blanket recommendation.
Before acceptance, agree the representative parts, tool states, operating sequence and quality criteria with both suppliers. Demonstrate cold start, normal production, rejected parts, interrupted cycles and controlled recovery. Record the final tool data and software backup. This turns the comparison into a repeatable purchasing decision and helps prevent a later fixture change from invalidating the original robot selection.
Motion architecture and functionality
Agile Robots Diana 7 has 7 arm axes and DOBOT CR12A has 6 arm axes. A seven-axis arm has an additional posture degree of freedom: the elbow can move while preserving a tool pose where the joint limits permit. This can help around obstacles, but also requires cable and full-path validation. Compare tool detection, sensing, machine I/O and recovery as separate delivered functions.
Industries and application fit
For Agile Robots Diana 7 vs DOBOT CR12A, use the actual part and process as the industry filter. Electronics, manufactured-component handling and machine tending are candidate uses when their tool mass, access and quality requirements fit the documented configurations. These are application-selection judgments, not claims that either exact model is installed at a named customer. A food, medical-device or clean-production application additionally requires the correct material, lubrication and protection package; the base model name does not establish hygienic or cleanroom compliance.
Selection issue | Agile Robots Diana 7 | DOBOT CR12A |
|---|---|---|
Tool and workpiece mass | 7 kg named scope; include the complete tool | 12 kg named scope; include the complete tool |
Working reference | 923 mm | 1200 mm |
Main configuration boundary | Tool mass, wrist moments and access constrain the headline specification. | Keep base CRA, AS/SafeSkin, torque-sensing and IP68 packages distinct. Robot speed and payload do not certify the complete collaborative task. |
Process approval | Demonstrate the actual loaded path and recovery | Demonstrate the same loaded path and recovery |
Frequently asked questions
Which robot is better for this application?
Agile Robots Diana 7 is the stronger starting point for 7 kg collaborative-platform handling within the documented 923 mm working reference, while DOBOT CR12A is worth shortlisting for 12 kg CRA-generation handling within the named 1200 mm working radius. The final choice depends on the real loaded path, required protection, controls and acceptance results. Neither a higher payload nor a longer reach establishes a universal winner.
What payload should I use for the comparison?
Use 7 kg for the specified Agile Robots Diana 7 example and 12 kg for DOBOT CR12A, subject to all documented load and orientation conditions. Include the tool, adapters, sensors and carried part. Keep base CRA, AS/SafeSkin, torque-sensing and IP68 packages distinct. Robot speed and payload do not certify the complete collaborative task.
Does the stated reach guarantee access to my fixture?
No. The comparison gives 923 mm for Agile Robots Diana 7 and 1200 mm for DOBOT CR12A using the stated model references. Joint limits, reach reference points, wrist orientation, tool length and collisions determine whether the actual fixture is accessible. Simulate the full approach and exit path.
Can I use the best specifications from every family variant?
No. Keep each named model and revision intact. A different arm length, controller generation or protection option can change the relevant specification. Do not combine one version’s maximum payload with another version’s maximum reach.
Is repeatability the same as finished-part accuracy?
No. The stated values are ±0.05 mm for Agile Robots Diana 7 scope and ±0.03 mm for the competitor scope. Finished-part results also depend on fixtures, TCP calibration, sensing, thermal conditions and tool compliance. Validate the actual process instead of treating catalogue repeatability as a complete accuracy guarantee.
How should purchase prices be compared?
Use current written quotations for Agile Robots Diana 7 and DOBOT CR12A with the same arm, controller, software, tooling and commissioning scope. This comparison does not represent an ATC sales offer or stock confirmation. Historical review figures are not a substitute for a configuration-specific purchase quotation.
Can these robots operate safely next to people without guarding?
These specifications do not establish a safe unguarded installation. Assess the complete task, tool, load and machine interface, then implement and validate the required safeguarding and operating procedures. Do not infer collaborative operation from a compact arm, limited payload or education setting.
What should an acceptance test compare?
Use the same parts, actual tool load, fixture locations, path and quality criteria for Agile Robots Diana 7 and DOBOT CR12A. Check production timing, settling, interruptions and recovery. Include the most difficult loaded approach and retreat. Approve the exact delivered configuration and preserve its final settings.
Related ATC reviews
Specifications describe the model scope identified above. Purchase pricing requires a current configuration-specific quotation. Confirm current manufacturer documentation, local supply, controller compatibility and the exact configuration before purchase.
