ABB SWIFTI CRB 1300-11/0.9 vs Kassow Robots KR1410: Cobot Comparison
Updated: 10 hours ago
IN A NUTSHELL
🔎 THE KEY DIFFERENCE This is a load-versus-reach trade-off: ABB SWIFTI CRB 1300-11/0.9 has the higher stated load capacity, while Kassow Robots KR1410 has the longer stated reach. Start with the constraint your task actually has. ABB SWIFTI CRB 1300-11/0.9 has 6 axes, compared with 7 axes for Kassow Robots KR1410. |
→ CONSIDER ABB SWIFTI CRB 1300-11/0.9 Consider it when additional load capacity matters more than extra reach. This article compares 11 kg with a published reach of 900 mm; include the gripper and part in the load. |
→ CONSIDER Kassow Robots KR1410 Consider it when reaching farther matters more than the higher payload of the alternative. This article compares 10 kg with a published reach of 1400 mm; include the gripper and part in the load. |
💡 THE TAKEAWAY Check the required tool angles and approach path: different axis counts change movement options. Choose only after both suppliers demonstrate the loaded task and quote the same complete installation. |
ABB SWIFTI CRB 1300-11/0.9 vs Kassow Robots KR1410 compares the exact robot configurations, complete tool loads, workspace and ownership requirements that determine whether an automation cell will work. The defining choice is the cell's operating concept: ABB SWIFTI CRB 1300-11/0.9 combines industrial handling with monitored separation, while Kassow Robots KR1410 must be assessed in its own qualified operating modes. The alternative adds a seventh joint, which may change fixture access even when its nominal reach looks similar.
The indicative starting-price references are USD 45,000 for ABB SWIFTI CRB 1300-11/0.9 and USD 43,900 for Kassow Robots KR1410. These are review or maker starting prices, not equivalent turnkey quotations. The linked individual reviews provide the underlying specifications; the buying decision also needs the offered revision, tool, process demonstration and installed bill of materials.
Quick verdict
ABB SWIFTI CRB 1300-11/0.9: An industrial handling cell with intermittent operator access and a validated monitored-separation concept. SWIFTI relies on SafeMove and appropriate external safety sensing for the collaborative operating concept. Its industrial speed is not an unrestricted contact-operation speed.
Kassow Robots KR1410: Seven-axis machine tending across a 1,400 mm workspace with 10 kg capacity. Its 10 kg rating does not cover an 11 or 12 kg tool-and-part combination.
ABB SWIFTI CRB 1300-11/0.9 vs Kassow Robots KR1410: technical specifications
Specification | ABB SWIFTI CRB 1300-11/0.9 | Kassow Robots KR1410 |
|---|---|---|
Rated attached load | 11 kg | 10 kg |
Published reach / geometry | 900 mm | 1400 mm |
Position repeatability | ±0.02 mm | ±0.03 mm |
Controlled axes | 6 | 7 |
Arm / system mass | 75 kg | Confirm supplied configuration |
Arm protection reference | IP40 standard; IP67 option | IP54 |
Controller / HMI | ABB OmniCore C30 | Confirm supplied controller |
Indicative starting price | USD 45,000 | USD 43,900 |
The reach values retain their published geometric references. Wrist, flange, full-load workspace and maximum geometry are different measurements. The table does not combine a family's highest payload, longest reach or best precision into one imaginary configuration. Where the source does not document a field, the supplier must identify it for the offered revision.
Payload and tooling: calculate the complete moving load
The initial load comparison is 11 kg for ABB SWIFTI CRB 1300-11/0.9 and 10 kg for Kassow Robots KR1410. A complete attached load above 10 kg would exceed the lower headline rating in the simple rated configurations, before any geometry-specific qualification. Include fingers, adapters, cameras, valves and carried material; do not compare only the workpiece mass.
Check the centre of gravity, wrist moments and inertia against the exact load diagram at the most demanding pose. An eccentric long part can fail that check while remaining below the mass limit. If a supplier uses a reduced-load condition, include it in the acceptance record and ensure the production recipe cannot silently exceed it.
Reach, posture and access
ABB SWIFTI CRB 1300-11/0.9 lists 900 mm; Kassow Robots KR1410 lists 1400 mm. Plot the actual tool centre point rather than the bare flange. The pickup, insertion, inspection and reject positions all require both a reachable location and a feasible orientation. Add the machine door, fixture walls, service cables and carried-part envelope before selecting a base location.
ABB SWIFTI CRB 1300-11/0.9 has 6 controlled axes, compared with 7 for Kassow Robots KR1410. A redundant joint can change elbow posture while preserving the tool pose. It is useful when it resolves a real obstruction, but it does not make the reachable volume free of collisions or singularities. Qualify the closest approach and escape motion using the intended load, not only a manually positioned empty arm.
ABB SWIFTI CRB 1300-11/0.9: engineering assessment
Separate fast automatic operation from human access. Place the scanner, stopping zones and access routes in the layout before comparing cycle time with a force-limited cobot. Standard IP40 and optional IP67 are different quotations. The reviewed combination is 11 kg, 900 mm and ±0.02 mm positioning repeatability. These figures establish an initial shortlist, while the actual production tool and process establish suitability.
SWIFTI relies on SafeMove and appropriate external safety sensing for the collaborative operating concept. Its industrial speed is not an unrestricted contact-operation speed. Define the controller version, enabled software, backup procedure and ownership of the final application before commissioning. A familiar brand is useful when it translates into a technician's ability to diagnose an interrupted task, restore a program and obtain the correct replacement component.
Kassow Robots KR1410: where the alternative adds value
The seventh joint may help avoid a fixture or machine door at the same tool pose. That flexibility is valuable only if a practical collision-free motion remains at the required load and safety settings. The reviewed configuration combines 10 kg, 1400 mm and ±0.03 mm positioning repeatability. Assess that combination against the actual application instead of assuming that a newer interface or a larger model number settles the choice.
Its 10 kg rating does not cover an 11 or 12 kg tool-and-part combination. Require a demonstration that includes the intended gripper, normal safety settings and representative part variation. If a critical requirement needs another sensor, external axis, enclosure or custom software, include that work in the alternative's cost and maintenance plan.
Precision, contact behavior and finished-part quality
The positioning references are ±0.02 mm and ±0.03 mm. Repeatability describes returning to a pose under specified conditions; it does not independently establish absolute accuracy or the tolerance of an assembled part. Tool calibration, fixture compliance, thermal effects, workpiece variation and process forces remain relevant even when the robot's repeatability is much tighter than the nominal part tolerance.
For handling, measure reliable acquisition and placement across the complete tray or fixture range. For assembly, measure the resulting seating, fastener or inspection outcome. A successful repeat on one prepared sample is insufficient evidence for a variable production batch. Prefer the system that meets the defined quality criterion with an understandable and maintainable process.
Programming and control integration
ABB SWIFTI CRB 1300-11/0.9 uses ABB OmniCore C30; the source identifies Confirm supplied controller for Kassow Robots KR1410. Evaluate the supplied teach interface and software with the technicians who will maintain the actual cell. Do not assume that every documented interface, licence or optional board is included in the starting price.
Create an I/O schedule for the gripper, machine, vision system and safety devices. Match signal voltage, connector pins, protocol roles and acknowledgement timeouts. Require a lost-network test, a missed grip and an interrupted machine cycle. Retain editable programs, backups, calibration data and a recovery procedure that an intended operator can follow safely.
Safety concept and useful cycle time
SWIFTI's monitored-separation concept makes operator access part of the cycle-time calculation. The scanner field, stopping response and path to replenishment determine when the robot slows or stops. Do not compare its fast clear-zone motion with a competing arm under a different access scenario and call that a matched productivity test.
Use the same part, fixture sequence, normal safety settings and peripheral delays for both demonstrations. Machine dwell, grip confirmation, inspection and human visits may dominate arm motion time. Record good parts per hour, changeover, rejects and restart time as well as a best-case cycle. An advertised maximum TCP speed is not a production benchmark.
Environment, mounting and service access
The arm protection references are IP40 standard; IP67 option for ABB SWIFTI CRB 1300-11/0.9 and IP54 for Kassow Robots KR1410. Specify the actual contamination, cleaning fluid, temperature and exposure in the purchase requirement. The cabinet, tool connectors, gripper, camera and cable exits need their own protection; an arm ingress rating is not blanket approval for a complete washdown process.
The mass references are 75 kg and Confirm supplied configuration. Keep arm mass separate from carried payload and cabinet weight. Verify the mounting structure, anchoring, dynamic loads and lifting method using the exact installation drawings. Leave access for controller cooling, connectors, tool service and an arm replacement without dismantling the entire machine bay.
Starting price versus total installed cost
The starting-price references are USD 45,000 and USD 43,900. The arithmetic difference is USD 1,100, before aligning the supplied scope. A lower arm price can be useful, but it is not proof of a cheaper commissioned cell. Confirm whether controller, pendant, software, safety equipment, cables and delivery are included.
Request comparable bills of materials covering tooling, fixtures, vision, machine interfaces, safety equipment, integration, commissioning and training. Include freight, tax and on-site work where applicable. Obtain configuration-specific warranty and delivery commitments and identify who resolves faults spanning the robot, gripper and machine. Do not turn an old review price into a statement of current stock or guaranteed lead time.
Application selection and acceptance criteria
Decision gate | Compare in this pair | Evidence to require |
|---|---|---|
Attached load | 11 kg versus 10 kg | Final tool mass, moments and inertia |
Usable workspace | 900 mm versus 1400 mm | Loaded path and all required orientations |
Process result | ±0.02 mm versus ±0.03 mm | Representative finished-part acceptance test |
Operating concept | Monitored separation and actual operator access | Safe access, stop and restart demonstration |
Installed value | USD 45,000 versus USD 43,900 | Matched quotation and maintenance responsibility |
The defining choice is the cell's operating concept: ABB SWIFTI CRB 1300-11/0.9 combines industrial handling with monitored separation, while Kassow Robots KR1410 must be assessed in its own qualified operating modes. The alternative adds a seventh joint, which may change fixture access even when its nominal reach looks similar. For ABB, the application to demonstrate is an industrial handling cell with intermittent operator access and a validated monitored-separation concept. For the alternative, demonstrate seven-axis machine tending across a 1,400 mm workspace with 10 kg capacity. A failed load, posture, quality or safety gate requires a different concept before an attractive purchase price becomes relevant.
Give both suppliers the same tool CAD, part range, target cycle, exposure conditions and intended operator interaction. Agree measurable pass criteria before the trial. Test a missed pickup, rejected part, blocked machine, communication loss and restart after power interruption. Have the intended operator change a recipe and recover an interrupted sequence under the approved procedure.
Complete product reviews
Frequently asked questions
Which should I choose: ABB SWIFTI CRB 1300-11/0.9 or Kassow Robots KR1410?
The defining choice is the cell's operating concept: ABB SWIFTI CRB 1300-11/0.9 combines industrial handling with monitored separation, while Kassow Robots KR1410 must be assessed in its own qualified operating modes. The alternative adds a seventh joint, which may change fixture access even when its nominal reach looks similar. Seven-axis machine tending across a 1,400 mm workspace with 10 kg capacity. Select the configuration that passes the real load, path, process-quality and safety requirements with an acceptable installed quotation and a maintainable operating workflow.
What starting prices are used in this comparison?
The references are USD 45,000 for ABB SWIFTI CRB 1300-11/0.9 and USD 43,900 for Kassow Robots KR1410. They are indicative starting prices from the linked reviews or maker information. Confirm the offered controller, pendant, software, safety equipment, freight and integration scope; these figures are not matched turnkey offers.
Does the payload rating include the gripper?
Yes. Count the complete end effector, adapters, attached devices and carried part, then check the permitted moments and inertia. This comparison uses 11 kg and 10 kg. Passing the mass limit alone does not approve an eccentric or high-inertia tool.
Which robot has the more useful workspace?
ABB SWIFTI CRB 1300-11/0.9 lists 900 mm, while Kassow Robots KR1410 lists 1400 mm. Check matching geometric references, the actual tool offset, required orientations and the full loaded path. An endpoint that is reachable by the wrist may still be unsuitable for insertion, clearance or safe retreat.
Does repeatability guarantee the finished-part tolerance?
No. The comparison uses ±0.02 mm for ABB SWIFTI CRB 1300-11/0.9 and ±0.03 mm for Kassow Robots KR1410. Fixtures, calibration, part variation and process forces affect the completed result. Define and measure the actual assembly, handling or inspection acceptance criterion.
Can SWIFTI run at full industrial speed beside a person?
Its industrial-speed operating concept depends on validated separation monitoring, appropriate sensing and the finished application's safety design. Human access may cause slowdown or stopping. Compare production output with the actual operator access pattern.
Are all software and safety options included in the price?
Not automatically. The source identifies Confirm supplied controller for Kassow Robots KR1410, but only the current quotation defines the supplied and enabled package. Confirm interfaces, programming licences, protective devices, backups and ownership of the finished program.
What should the supplier demonstrate before purchase?
Use the real tool and representative parts under normal operating settings. Require the critical poses, finished quality, realistic cycle, changeover, missed-grip response, communication-loss behavior and safe restart. Keep the program, configuration and agreed acceptance record from the successful trial.
