ABB IRB 6790 vs Yaskawa Motoman GP225: Robot Comparison
Updated: 10 hours ago
IN A NUTSHELL
🔎 THE KEY DIFFERENCE This is a load-versus-reach trade-off: ABB IRB 6790 has the higher stated load capacity, while Yaskawa Motoman GP225 has the longer stated reach. Start with the constraint your task actually has. |
→ CONSIDER ABB IRB 6790 Consider it when additional load capacity matters more than extra reach. This article compares 235 kg with a published reach of 2,650 mm; include the gripper and part in the load. |
→ CONSIDER Yaskawa Motoman GP225 Consider it when reaching farther matters more than the higher payload of the alternative. This article compares 225 kg with a published reach of 2702 mm; include the gripper and part in the load. |
💡 THE TAKEAWAY Choose the robot that handles your actual tool and part through the required path, with controls and support your team can use. Compare complete installation quotes, rather than arm-only prices. |
ABB IRB 6790 vs Yaskawa Motoman GP225 is an engineering buying comparison for wet-process qualification. ABB IRB 6790's reviewed IP69 Foundry Prime 3 package addresses washing exposure, while Yaskawa Motoman GP225 is a handling robot. Matching lift capacity does not qualify the alternative for the same fluids, pressure, temperature or cleaning routine.
The starting-price references in the linked reviews are USD 105,000 for ABB IRB 6790 and USD 69,000 for Yaskawa Motoman GP225. The ABB figure is a family starting reference, not a quotation for the worked variant. The analysis distinguishes tool load, geometry, process equipment, controller ownership and installed cost. Neither a review price nor a robot-only specification defines a complete commissioned cell.
Quick verdict
ABB IRB 6790: Parts washing and handling in demanding wet environments. The 235 kg / 2,650 mm and 205 kg / 2,800 mm versions use the reviewed IP69 Foundry Prime 3 configuration.
Yaskawa Motoman GP225: General industrial handling and tending with 225 kg capacity and 2702 mm horizontal reach. The specified GP variant must be retained; load, reach and mounting data from a different suffix or family member do not transfer.
ABB IRB 6790 vs Yaskawa Motoman GP225: technical specifications
Specification | ABB IRB 6790 | Yaskawa Motoman GP225 |
|---|---|---|
Configuration used | IRB 6790 235 kg / 2.65 m | Yaskawa Motoman GP225 |
Attached-load reference | 235 kg | 225 kg |
Horizontal reach / arm length | 2,650 mm | 2702 mm |
Position repeatability | ±0.05 mm | ±0.05 mm |
Controlled axes | 6 | 6 |
Arm / installation mass reference | Variant-specific mass: confirm exact order code | 1080 kg |
Arm protection | IP69 with reviewed Foundry Prime 3 | Confirm exact protection package |
Controller | ABB IRC5 | YRC1000 |
Indicative review starting reference | USD 105,000 (family reference) | USD 69,000 |
The table uses IRB 6790 235 kg / 2.65 m as the worked ABB configuration. It is one documented configuration for explaining the tradeoffs, not an automatic recommendation or a claim that the family has only this version. The linked reviews describe the underlying data. Confirm the exact mechanical generation, controller revision, installation orientation, environmental package and load chart against the supplied order code.
ABB variant map: keep load and reach together
Documented configuration / example | Payload and reach | Repeatability reference |
|---|---|---|
IRB 6790 235 kg / 2.65 m | 235 kg / 2,650 mm | ±0.05 mm |
IRB 6790 205 kg / 2.80 m | 205 kg / 2,800 mm | ±0.05 mm |
The 235 kg / 2,650 mm and 205 kg / 2,800 mm versions use the reviewed IP69 Foundry Prime 3 configuration. The starting price does not establish the price of every listed configuration. Where the review gives only a family precision range, this article leaves the exact-variant value for supplier confirmation rather than assigning the best family figure to every arm.
Start with the process, not the payload headline
ABB IRB 6790's reviewed IP69 Foundry Prime 3 package addresses washing exposure, while Yaskawa Motoman GP225 is a handling robot. Matching lift capacity does not qualify the alternative for the same fluids, pressure, temperature or cleaning routine. The acceptance case for this pair should be: A representative approved exposure and handling cycle with the final gripper, connectors, seals and cleaning requirements. The useful outcome to measure is process completion, leak or ingress prevention and maintainable service intervals. A supplier demonstration must use the same workpiece range, tool mass, fixtures and normal operating conditions for both proposals.
A dedicated process arm and a general-purpose manipulator can sometimes perform similar motions, yet require very different integration. A torch needs process utilities and seam access; a spot gun imposes mass, inertia and clamp requirements; a pallet tool needs stable grip and stack coverage. Include those differences before comparing robot-only prices.
Payload, wrist moments and the complete end effector
For the worked configurations, the load references are 235 kg and 225 kg. Count fingers, adapters, cameras, valves, cables carried by the wrist and the actual workpiece. A nominally permitted part can become an excessive load once its gripping hardware is added. Use the relevant load diagram rather than assuming the maximum payload is allowed at every centre of gravity.
Check moments and inertia at the worst tool orientation and during the required acceleration. Long, offset parts can create a wrist problem while staying below the mass limit. For a welding gun, include the complete utilities and balancing arrangement. For a pallet gripper, include the full layer or multiple picked cases and a credible grip-loss condition.
Workspace, axis count and required orientation
ABB IRB 6790 has 6 controlled axes and the worked reach is 2,650 mm; Yaskawa Motoman GP225 has 6 axes and 2702 mm. Equal axis counts do not guarantee equal joint limits, elbow clearance or singularity-free access. Check every required pickup, process, reject and recovery pose with the tool attached.
Use a tool-centre-point layout and include the carried-part envelope, machine doors, fixture walls, hose loops and neighboring equipment. Horizontal reach is not the same as vertical reach or useful reach below a shelf. A reachable endpoint can still fail because the wrist cannot attain the required approach angle or retreat without a collision.
ABB IRB 6790: engineering assessment
Environmental qualification is central to this model. A handling or spot-welding arm with a similar payload is not an equivalent washing solution unless its approved exposure, chemicals, seals and complete cell meet the same requirements. In this comparison, the worked configuration is IRB 6790 235 kg / 2.65 m, with 235 kg, 2,650 mm and the stated repeatability reference of ±0.05 mm. Its practical benefit should be demonstrated at the intended operating load rather than inferred from the family label.
The 235 kg / 2,650 mm and 205 kg / 2,800 mm versions use the reviewed IP69 Foundry Prime 3 configuration. Identify who owns the final RAPID program, RobotStudio project, safety settings and backups. Existing ABB experience is useful when the actual maintenance team can restore a stopped application, identify a failed component and keep the cell supported through its planned service life.
Yaskawa Motoman GP225: where the alternative adds value
Build the layout around the actual fixture, grip point and machine door. Yaskawa Motoman GP225 should demonstrate a collision-free loaded path, useful throughput and maintainable error recovery on the quoted controller. Its reviewed combination is 225 kg, 2702 mm and ±0.05 mm positioning repeatability. The specified GP variant must be retained; load, reach and mounting data from a different suffix or family member do not transfer. Establish what that configuration adds to the actual task: a useful orientation, smaller workspace, longer path coverage, specific process equipment or a more familiar controller.
The source identifies YRC1000 for Yaskawa Motoman GP225. INFORM and MotoSim form the programming and simulation route described in the review. Compare the local team's ability to create, diagnose, back up and recover the finished application rather than judging software only by a short sales demonstration.
Precision and process quality
The two positioning references are ±0.05 mm and ±0.05 mm. These concern returning to a pose under stated conditions; they are not a finished-part tolerance guarantee. Absolute accuracy, path behavior, fixture stiffness, calibration, tool wear, thermal change and workpiece variation remain separate. Where a variant-specific precision value is not documented, obtain it for the quoted order code.
Measure process completion, leak or ingress prevention and maintainable service intervals. For welding, inspect the accepted seam or spot result using a qualified process. For handling, count stable pickup and placement throughout the fixture range. For palletizing, test stack stability and top-layer clearance. A faster unloaded movement or one successful prepared sample does not establish sustained production quality.
Controller, interfaces and error recovery
ABB IRC5 and YRC1000 are the controller references for the reviewed configurations. Controller generation affects the program format, available interfaces and support plan. Confirm the actual pendant, network roles, protocol options, external-axis support and software licences; a capability mentioned in a brochure is not proof that it is enabled in the starting package.
Prepare an I/O and network schedule for the PLC, gripper, machine, process equipment, vision and protective devices. Specify acknowledgement timeouts, safe state and restart sequence. Demonstrate a lost grip, missing part, rejected result, interrupted machine cycle and communication loss. Retain editable programs, calibration files, controller backups and a recovery guide suitable for the intended operators.
Guarding, environment and installation
These are industrial robot applications. Design the complete safeguarding concept around the robot, tools, carried part, stored energy, machine and process hazards. Safe access, stopping behavior, interlocks, isolation and restart belong in the cell design. A newer controller or an additional axis does not make an industrial application suitable for unrestricted human access.
The arm protection references are IP69 with reviewed Foundry Prime 3 for the reviewed ABB package and Confirm exact protection package for Yaskawa Motoman GP225. An unspecified value requires exact-package confirmation. Check the cabinet, tool, connectors and dress pack separately. For this washing-oriented ABB model, document the permitted pressure, temperature, fluids and maintenance procedure before treating a competing arm as equivalent.
Obtain the installation mass and floor reactions for IRB 6790 235 kg / 2.65 m; the alternative's review gives 1080 kg. Keep carried payload separate from installation mass and cabinet weight. Design the support, anchoring, lifting plan, cooling space and service route using the exact drawings. Shelf-mounted and very heavy arms can make structural work a significant part of total installed cost.
Starting price and installed-cost comparison
The numerical starting references are USD 105,000 and USD 69,000. The first is a family-level review reference; it is not assigned to the selected variant as a firm offer. New, legacy, refurbished and process-package quotations can have different scope and condition. Confirm the supplied revision, warranty, support, delivery and commissioning responsibilities before using either number in a payback calculation.
Request comparable bills of materials covering robot and controller, tool, fixtures, process utilities, sensing, safeguarding, machine interfaces, support structure, integration, simulation, commissioning and training. Include freight, tax and on-site work where applicable. Assign responsibility for faults spanning vendors. A lower arm price can be outweighed by an extra positioner, unsuitable fixture, structural change or software maintenance burden.
Decision gates for the actual cell
Gate | This pair | Evidence to require |
|---|---|---|
Process fit | Wet-process qualification | A representative approved exposure and handling cycle with the final gripper, connectors, seals and cleaning requirements. |
Configuration | IRB 6790 235 kg / 2.65 m versus Yaskawa Motoman GP225 | Full order code and matched load drawing |
Load | 235 kg versus 225 kg | Tool, part, moments and inertia |
Workspace | 2,650 mm versus 2702 mm | All required orientations and a loaded path |
Quality | ±0.05 mm versus ±0.05 mm | Process completion, leak or ingress prevention and maintainable service intervals. |
Installed value | USD 105,000 versus USD 69,000 | Aligned quotation, scope and support plan |
Begin with the actual process: wet-process qualification. Parts washing and handling in demanding wet environments. General industrial handling and tending with 225 kg capacity and 2702 mm horizontal reach. Eliminate a candidate if it cannot meet the complete load, pose, quality or safeguarding requirement. If both pass, compare useful throughput, operator changeover and the maintenance burden of the supplied system. A different robot category can be appropriate only when the whole cell concept changes with it.
Give both suppliers the same tool CAD, part range, fixture model, target output and access pattern. Agree measurable pass criteria before the trial. Use representative variation and normal safety settings; include replenishment, rejects, process interruptions and recovery after power loss. Keep the tested configuration, program and acceptance record as part of the delivered system.
Complete product reviews
Frequently asked questions
Which should I choose: ABB IRB 6790 or Yaskawa Motoman GP225?
ABB IRB 6790's reviewed IP69 Foundry Prime 3 package addresses washing exposure, while Yaskawa Motoman GP225 is a handling robot. Matching lift capacity does not qualify the alternative for the same fluids, pressure, temperature or cleaning routine. Choose the complete proposal that passes the real load, process-quality, workspace and safeguarding requirements, then compare installed cost and the skills needed to maintain it.
Which ABB configuration is compared with Yaskawa Motoman GP225?
IRB 6790 235 kg / 2.65 m is used as the worked configuration, with 235 kg and 2,650 mm. The 235 kg / 2,650 mm and 205 kg / 2,800 mm versions use the reviewed IP69 Foundry Prime 3 configuration. Confirm the full order code and generation with the supplier.
What starting prices are used?
The linked review references are USD 105,000 for ABB IRB 6790 and USD 69,000 for Yaskawa Motoman GP225. The ABB value is a family starting reference, not a quote for every variant. Confirm the current supplied package, condition, controller, process equipment, safeguarding, delivery and integration scope.
Does payload include the tool?
Yes. Include the complete end effector, adapters, attached equipment and workpiece, then verify the permitted centre of gravity, wrist moments and inertia. The worked references are 235 kg and 225 kg. A part below the mass headline can still violate an eccentric-load or inertia limit.
Are the reach and axis counts directly interchangeable?
No. The comparison uses 2,650 mm with 6 axes and 2702 mm with 6 axes. Check tool offset, required orientation, joint limits, vertical or below-base access and the full loaded path. A four-axis or five-axis mechanism does not offer every six-axis orientation.
Does repeatability guarantee process quality?
No. The positioning references are ±0.05 mm and ±0.05 mm. Measure the finished result with representative fixtures, tooling and part variation. For this comparison, the process criterion is process completion, leak or ingress prevention and maintainable service intervals.
What is the main limitation of Yaskawa Motoman GP225?
The specified GP variant must be retained; load, reach and mounting data from a different suffix or family member do not transfer. Build the layout around the actual fixture, grip point and machine door. Yaskawa Motoman GP225 should demonstrate a collision-free loaded path, useful throughput and maintainable error recovery on the quoted controller.
What should be demonstrated before purchase?
A representative approved exposure and handling cycle with the final gripper, connectors, seals and cleaning requirements. Include machine or process interlocks, normal guarding, missed grip or rejected part, communication loss, changeover and safe restart. Retain the exact configuration, controller backup, program and agreed acceptance record from the trial.
