PI A-341 HGS Hybrid Gantry Systems
PI A-341 HGS Hybrid Gantry Systems
PI A-341 HGS combines an air-bearing cross axis with mechanically guided lower axes in an overhead gantry. The supplied listing describes XY travel configurations from 300 × 300 to 500 × 1,000 mm, an optional Z axis and ironless linear motors with absolute feedback. The bearing mix addresses different axis requirements rather than making the entire machine an air-bearing system.
Review Summary
Consider PI A-341 HGS Hybrid Gantry Systems for precision scanning, laser processing, inspection and assembly requiring a configured overhead motion system. Establish the required operating point and installation interfaces before choosing the configuration, and use a representative loaded cycle as the acceptance basis.
Family A-341 PIglide HGS Structure Hybrid-bearing overhead gantry Cross-axis guide Air bearing Lower-axis guides Mechanical linear bearings with dual-motor arrangement Listed XY ranges 300 × 300 to 500 × 1,000 mm; configuration dependent Listed cross-axis speed Up to 2 m/s Feedback Absolute encoders; listed 1 nm increment Z-axis options Selected ballscrew or linear-motor arrangement Applications and Industries
Precision scanning, laser processing, inspection and assembly requiring a configured overhead motion system.
Manufacturing and automation
Request a quote for the exact configuration,quantity and delivery schedule.
| Family | A-341 PIglide HGS |
| Structure | Hybrid-bearing overhead gantry |
| Cross-axis guide | Air bearing |
| Lower-axis guides | Mechanical linear bearings with dual-motor arrangement |
| Listed XY ranges | 300 × 300 to 500 × 1,000 mm; configuration dependent |
| Listed cross-axis speed | Up to 2 m/s |
| Feedback | Absolute encoders; listed 1 nm increment |
| Z-axis options | Selected ballscrew or linear-motor arrangement |
