MOONS' Anti-Corrosion Hybrid Stepper Motors
MOONS' Anti-Corrosion Hybrid Stepper Motors
MOONS' anti-corrosion hybrid stepper range uses a protective coating intended to reduce internal corrosion. The manufacturer lists a two-phase, 1.8-degree stepper architecture and IP40 protection for the described series. It reports normal operation after an extended 240-hour salt-spray evaluation; that supplier result is not a waterproofing or service-life guarantee.
Review Summary
Consider MOONS' Anti-Corrosion Hybrid Stepper Motors for configured stepper positioning duties where the specified protective coating and environment are compatible. Establish the required operating point and installation interfaces before choosing the configuration, and use a representative loaded cycle as the acceptance basis.
Series Anti-corrosion hybrid stepper Phases 2 Full-step angle 1.8 degrees / 200 full steps per revolution Manufacturer IP rating IP40 Listed operating ambient −20 to +50°C Reported coating test 240-hour extended salt-spray evaluation; manufacturer result Test basis described MIL-STD-202G method101E with extended exposure Applications and Industries
Configured stepper positioning duties where the specified protective coating and environment are compatible.
Manufacturing and automation
Request a quote for the exact configuration,quantity and delivery schedule.
| Series | Anti-corrosion hybrid stepper |
| Phases | 2 |
| Full-step angle | 1.8 degrees / 200 full steps per revolution |
| Manufacturer IP rating | IP40 |
| Listed operating ambient | −20 to +50°C |
| Reported coating test | 240-hour extended salt-spray evaluation; manufacturer result |
| Test basis described | MIL-STD-202G method101E with extended exposure |
