Yaskawa Motoman MHP45L Review: Specs, Uses, Pros & Cons
Yaskawa Motoman MHP45L review: Axes — 6. Payload — 45 kg. This review examines the documented configuration, engineering tradeoffs and practical buying questions for this product.
Quick Verdict
A specialized paint-line handling robot for moving workpieces in a qualified hazardous-area installation. Its role is handling around the coating process; a long arm and hazardous-area package do not make it a paint atomizing robot.
Technical Specifications
Technical field | Documented configuration / buying implication |
|---|---|
Axes | 6 |
Payload | 45 kg |
Horizontal reach | 2,700 mm |
Vertical reach | 5,095 mm |
Controller | DX200-FM in documented package |
Environment | FM/FM-C Class I Division 1 package described; exact scope required |
Price | Request a configuration-specific quotation |
Design and Engineering Assessment
The MHP45L combines 45 kg payload with 2,700 mm horizontal access, useful for reaching across paint-line equipment. Its environmental approval must be matched to the exact robot, controller installation, atmosphere and accessories. An optional intrinsically safe pendant or functional-safety package should be itemized rather than assumed standard. Handling a coated part also creates quality constraints around grip marks, contamination and contact surfaces. Keep process-area classification and supplier documentation aligned throughout design and maintenance.
Applications and Best-Fit Projects
Consider paint-line part transfer and handling in an installation whose hazardous-area requirements match the documented supplied package.
Process architecture and mechanical selection
Begin with the process, then select a robot. Payload, reach and axis count must be evaluated together with tool moments, inertia and the required approach direction. Include cable dress, fixtures and auxiliary axes in the simulation. Portfolio maxima are especially easy to misuse: the largest payload, longest reach and finest repeatability may belong to three different configurations. Require one exact model specification for the final design.
Controls and responsibility boundaries
Specify whether the supply includes an arm, controller, process package or complete accepted cell. Allocate responsibility for PLC interfaces, tooling, machine interlocks, programming, cycle qualification and operator training. These boundaries determine both installed cost and fault-resolution time. For an older controller generation, confirm supported software, spare parts and replacement procedures before evaluating a low purchase price.
Acceptance and lifecycle performance
Measure good output over representative operation, including changeover, process checks and recovery. Maximum motion speed does not establish production throughput. Check maintenance access and the effect of service on calibration. A robust comparison uses the same load, tooling, process quality target and support horizon for every candidate, rather than mixing robot-only quotations with complete cell proposals.
Price, Value and What the Quote Should Include
Request a quotation for the exact configuration described in the technical table. Separate the base equipment from tooling, software options, installation, commissioning, training and ongoing service. Ask the supplier to identify the delivered revision and acceptance obligations in writing. A low hardware price is not a saving if the project requires unbudgeted integration or unsupported accessories.
For the value assessment, compare the present workflow with a realistic proposed cycle. Include the time people still spend loading, replenishing, checking quality and recovering faults. Estimate savings only from changes the proposed system can actually deliver. Keep maintenance, changeover and support availability in the calculation, and use a representative pilot to replace optimistic assumptions with measured results.
Pros and Cons
Strengths
• 45 kg paint-line handling class
• 2,700 mm horizontal reach
• Specific hazardous-area package
Limits to Account For
• Approval is configuration-specific
• Handling role differs from spraying
Commissioning and Acceptance Checklist
Verify certification scope, tool and pendant suitability, coated-part grip quality, grounding and recovery without compromising the area classification.
Write the required result, test conditions and pass/fail threshold before running acceptance. Include the least favorable normal load or part, a representative shift or operating sequence and the recovery cases that occur in the real workflow. Keep a record of the supplied hardware, software and settings so future maintenance can restore the same validated behavior.
Who Should Consider It
Consider paint-line part transfer and handling in an installation whose hazardous-area requirements match the documented supplied package. A specialized paint-line handling robot for moving workpieces in a qualified hazardous-area installation. Its role is handling around the coating process; a long arm and hazardous-area package do not make it a paint atomizing robot.
Frequently Asked Questions
What is Yaskawa Motoman MHP45L best suited to?
Consider paint-line part transfer and handling in an installation whose hazardous-area requirements match the documented supplied package.
Which technical specifications matter most for Yaskawa Motoman MHP45L?
The documented starting points are Axes: 6; Payload: 45 kg; Horizontal reach: 2,700 mm. Match those values to one supplied configuration; do not combine family endpoints or assume an optional package is included.
How should Yaskawa Motoman MHP45L be integrated into a real workflow?
Begin with the process, then select a robot. Define the task boundaries, handoff signals and exception states before commissioning. Verify them with the actual tooling, carriers, fixtures or site data rather than a simplified demonstration.
What are the main limitations of Yaskawa Motoman MHP45L?
The main constraints are approval is configuration-specific; handling role differs from spraying. The MHP45L combines 45 kg payload with 2,700 mm horizontal access, useful for reaching across paint-line equipment. Compare the complete installed solution against the process requirement rather than relying on a single headline figure.
What does Yaskawa Motoman MHP45L cost?
Request a configuration-specific quotation. A verified fixed public price for the complete package is not established here. The proposal should identify included hardware, required software, integration, training, service and any recurring charges so competing quotations cover the same scope.
Can Yaskawa Motoman MHP45L operate without human involvement?
Do not infer unattended reliability from a successful demonstration. Define which task steps are automated, which still require operators and how the system reacts to missing inputs, obstruction or process faults. Release only the validated operating envelope.
What should be tested before accepting Yaskawa Motoman MHP45L?
Verify certification scope, tool and pendant suitability, coated-part grip quality, grounding and recovery without compromising the area classification. Record measurable acceptance criteria and retain the results for the delivered configuration.
How should buyers compare Yaskawa Motoman MHP45L with alternatives?
Use the same task, quality target, operating conditions and support horizon for each proposal. Its role is handling around the coating process; a long arm and hazardous-area package do not make it a paint atomizing robot. Compare total installed and operating cost, including recovery effort and changeover, rather than robot-only price.
Specifications and included options depend on the ordered model and revision. Confirm the final configuration, commercial terms and local support with the supplier.
