UFACTORY xArm 5 vs Mitsubishi Electric ASSISTA RV-5AS-D: Robot Comparison
Updated: 5 hours ago
IN A NUTSHELL
🔎 THE KEY DIFFERENCE Mitsubishi Electric ASSISTA RV-5AS-D has the higher stated load capacity and longer stated reach. Those figures help shortlist it for heavier loads or wider layouts, but do not prove a faster production cycle. Their 5- and 6-axis mechanisms also offer different movement options. |
→ CONSIDER UFACTORY xArm 5 Consider it when its stated load and reach already cover your task and its controls fit your equipment. This article compares 3 kg and a 700 mm stated reach; include the gripper and part in the load. |
→ CONSIDER Mitsubishi Electric ASSISTA RV-5AS-D Consider it when additional load capacity and reach matter. This article compares 5 kg and a 910 mm stated reach; include the gripper and part in the load. |
💡 THE TAKEAWAY Check the required tool angles and approach path: different axis counts change movement options. Choose only after both suppliers demonstrate the loaded task and quote the same complete installation. |
UFACTORY xArm 5 vs Mitsubishi Electric ASSISTA RV-5AS-D is a choice about collaborative handling and cell integration. UFACTORY xArm 5 and Mitsubishi Electric ASSISTA RV-5AS-D differ in their working envelope, loading assumptions and engineering ecosystem. A useful decision starts with the exact mechanism and process, then checks whether either robot can execute the required path with the real tool attached. This comparison separates documented specifications from application-level engineering judgments.
UFACTORY xArm 5 vs Mitsubishi Electric ASSISTA RV-5AS-D: quick verdict
Shortlist UFACTORY xArm 5 for three-kilogram development or handling tasks whose complete tool path needs only five arm axes. Shortlist Mitsubishi Electric ASSISTA RV-5AS-D for 5 kg collaborative-platform handling within the documented 910 mm working reference. Neither is a universal winner: a robot that can carry the load may still fail the fixture-access, controller or maintenance requirements.
The numerical comparison below uses UFACTORY xArm 5 against Mitsubishi Electric ASSISTA RV-5AS-D. The stated model scope matters when comparing later revisions or differently equipped installations. Published repeatability describes return to a taught position under specified conditions; it does not establish complete-cell accuracy or prove a faster production cycle.
Specifications and exact configuration scope
Criterion | UFACTORY xArm 5 | Mitsubishi Electric ASSISTA RV-5AS-D |
|---|---|---|
Comparison configuration | UFACTORY xArm 5 | Mitsubishi Electric ASSISTA RV-5AS-D |
Payload used for comparison | 3 kg | 5 kg |
Reach / motion-area reference | 700 mm | 910 mm |
Axes | 5 | 6 |
Repeatability for this scope | ±0.1 mm | ±0.03 mm |
Controller reference | UFACTORY AC or DC control box running UFACTORY Studio | CR800-05VD |
Purchase-price basis | Configuration-specific quotation | Configuration-specific quotation |
Purchase pricing | From $5,799 (arm list price) | From $34,000 (arm list price) |
Read the reach row together with the geometric notes below. Manufacturers may specify an arm-link sum, a wrist-centre motion area or reach to the flange; those dimensions are not interchangeable. The table does not establish access to every point at every tool angle. Controller references identify reviewed packages, and actual compatibility must be confirmed by model, software version and region.
UFACTORY xArm 5: design and configuration
Keep the named mechanical version separate from newer product revisions and confirm the controller, firmware and SDK combination. Five axes cannot supply every six-axis tool attitude; confirm the entire orientation sequence.
Mitsubishi Electric ASSISTA RV-5AS-D: design and configuration
The Mitsubishi Electric MELFA ASSISTA RV-5AS-D is a 6-axis collaborative robot with a 5 kg rated payload, a 910 mm reach and ±0.03 mm repeatability. It is designed to work alongside operators without safety fencing, moving at up to 250 mm/s in collaborative operation and up to 1,000 mm/s in high-speed operation. The IP54 arm suits assembly, machine tending, inspection and pick-and-place tasks. The arm weighs 32 kg, mounts on the floor or ceiling and runs on the CR800-05VD controller.
For this pair, Mitsubishi Electric ASSISTA RV-5AS-D offers 5 kg over the stated 910 mm reference, compared with 3 kg and 700 mm for UFACTORY xArm 5 example. Mitsubishi Electric ASSISTA RV-5AS-D has the larger stated distance by 210 mm, but this difference is only a preliminary layout indicator because reference points and joint envelopes can differ. Locate the actual fixture in each manufacturer model before treating this as usable extra working space.
Payload, tooling and a worked load example
Consider an illustrative total wrist load of 2.4 kg: a 0.6 kg tool and adapter package carrying a 1.8 kg part or product group. This arithmetic leaves 0.6 kg below the UFACTORY xArm 5 example’s nominal limit and 2.6 kg below Mitsubishi Electric ASSISTA RV-5AS-D’s nominal limit. These are mass differences, not safety factors or a validated load approval. A heavy camera, valve block or retained material must be included before recalculating the total.
The example exposes the practical question: is the application limited by mass, by tool offset or by wrist rotation? UFACTORY xArm 5 is the lower-or-equal nominal payload choice in this pair. Mitsubishi Electric ASSISTA RV-5AS-D offers more or equal headline mass capacity, but that alone cannot approve an eccentric fixture. Moving the same mass farther from the flange increases the moment, and spreading it increases rotational inertia. Manufacturer load diagrams and the actual centre of gravity govern the final allowable motion.
Model the empty, partly loaded and fully loaded tool states separately. A vacuum layer gripper, a weld torch with hoses or an inspection head may change its effective loading during the cycle. Set the controller’s load data for each supported state and validate the transition logic. A payload table cannot predict acceleration derating, cable pull or transient reactions at a machine interface.
Reach, orientation and fixture access
Build the same cell model for both candidates: base height, machine opening, fixture datum, maximum part size, tool extension and access for maintenance. UFACTORY xArm 5 provides a stated 700 mm reference, while Mitsubishi Electric ASSISTA RV-5AS-D provides 910 mm. Check the deepest production pose and the return path with the loaded tool. An arm that just touches the target at full extension may have little freedom left to turn, retract or avoid a door.
For assembly and machine tending, test the gripper jaws in their open and closed positions. Include feeder replenishment, rejected-part disposal and tool changes. Check wrist flips and singularity avoidance along the whole path. A compact robot can fit a small fixture well, while a longer arm can simplify station placement; neither geometric benefit can be assumed without the actual model.
Precision and throughput: compare the same task
The comparison uses ±0.1 mm for UFACTORY xArm 5 and ±0.03 mm for Mitsubishi Electric ASSISTA RV-5AS-D. These figures should be read in their documented configuration scope. Repeatability is not absolute accuracy, camera calibration accuracy or finished-part capability. Fixture variation, TCP calibration, thermal conditions and tool compliance can dominate the error at the process point, especially when the tool extends far from the flange.
Ask each integrator to execute the same representative path with the same payload model, tool length, process dwell and stop conditions. Report transfer time, settling time, process time and waiting time separately. Published standard cycles often use different loads and distances; dividing one catalogue cycle by another would not establish the production advantage of UFACTORY xArm 5 over Mitsubishi Electric ASSISTA RV-5AS-D. Use a measured or validated application cycle before assigning a throughput benefit.
Programming, controls and production integration
UFACTORY xArm 5 is paired here with UFACTORY AC or DC control box running UFACTORY Studio, while Mitsubishi Electric ASSISTA RV-5AS-D uses CR800-05VD. Controller names identify the review baseline rather than a guarantee that all interface options are included. Compare the actual software revision, teaching workflow, diagnostic tools, fieldbus licences and recovery procedures. An existing trained team and reusable production code may outweigh a small dimensional advantage. Obtain a demonstration of the same machine handshake and interrupted-cycle recovery on both platforms.
Specify the PLC handshakes before ordering: cycle request, ready, busy, complete, fault, part present and recovery authorization. Define how an interrupted operation resumes without repeating a dangerous or quality-critical action. Vision, force sensing, fieldbus communication and external-axis coordination must be checked as explicit included or optional functions. An Ethernet connector does not by itself prove that a particular industrial protocol or software interface is licensed and supported.
Configuration and communication detail
Integration reference | UFACTORY xArm 5 | Mitsubishi Electric ASSISTA RV-5AS-D |
|---|---|---|
Control package | UFACTORY AC or DC control box running UFACTORY Studio | CR800-05VD |
Documented interface baseline | Specify required interfaces in the delivered package | Specify required interfaces in the delivered package |
Programming baseline | Named platform software and supported API; confirm supplied version | Named platform software and supported API; confirm supplied version |
Integration acceptance | Test the actual machine handshake and controlled recovery | Test the same handshake and controlled recovery |
Protection, installation and maintenance
Match the precise protection package to the process. Standard, protected, cleanroom, foundry and washing configurations can have different seals, services and maintenance requirements. Do not transfer the best optional IP or cleanroom rating to an unprotected base model. Check the controller location, cable bend radius, available lifting access and base reactions with the installer.
Treat safe operation as a property of the complete task and installation. Include the tool, sharp workpiece edges, trapping points, dropped loads and machine access. A collaborative arm does not make an unrestricted-speed application safe. Validate the required speed, force and separation measures with the actual parts. Plan tool replacement and fault recovery without dismantling the whole installation, and include connector access, lubrication and spare-cable replacement in the maintenance layout.
Price and lifecycle value
Published arm list prices: UFACTORY xArm 5 is listed from $5,799 and Mitsubishi Electric ASSISTA RV-5AS-D is listed from $34,000. Request configuration-specific quotations for UFACTORY xArm 5 and Mitsubishi Electric ASSISTA RV-5AS-D. An arm-only number is not the price of a commissioned production cell. Ask for separate line items for controller, pendant, communication options, end effector, safety equipment, installation, acceptance, training and warranty. Price changes, regional support and included software can reverse an apparent hardware-cost advantage. Compare the same delivered scope before calculating payback.
Compare the installed production scope: tool, fixtures, sensing, guarding, machine interface, programming, acceptance and training. For small-parts automation, include feeders, vision calibration, nests and rejected-part handling. Keep purchase cost and recurring support costs separate. No payback figure is defensible until the actual cycle, yield, utilization and installation quotation are known.
Selection and acceptance plan
Decision gate | UFACTORY xArm 5 | Mitsubishi Electric ASSISTA RV-5AS-D |
|---|---|---|
Strongest documented fit | three-kilogram development or handling tasks whose complete tool path needs only five arm axes | 5 kg collaborative-platform handling within the documented 910 mm working reference |
Main boundary | Five axes do not provide arbitrary six-axis wrist orientation; demonstrate every approach and retreat before selecting the platform. | Confirm exact configuration, controller, wrist loading and installation envelope. |
Required approval | Exact UFACTORY variant, tool load and validated process path | Exact competitor revision, tool load and validated process path |
Acceptance evidence | Agreed parts, path, quality and recovery results | The same agreed parts, path, quality and recovery results |
Advance UFACTORY xArm 5 when three-kilogram development or handling tasks whose complete tool path needs only five arm axes solves the real constraint and its selected configuration passes the load and access checks. Advance Mitsubishi Electric ASSISTA RV-5AS-D when 5 kg collaborative-platform handling within the documented 910 mm working reference provides the more suitable process arrangement. Reject either candidate if a mandatory pose, protection requirement or controller function cannot be demonstrated. A purchasing shortlist should preserve these conditions instead of converting a single catalogue advantage into a blanket recommendation.
Before acceptance, agree the representative parts, tool states, operating sequence and quality criteria with both suppliers. Demonstrate cold start, normal production, rejected parts, interrupted cycles and controlled recovery. Record the final tool data and software backup. This turns the comparison into a repeatable purchasing decision and helps prevent a later fixture change from invalidating the original robot selection.
Motion architecture and functionality
UFACTORY xArm 5 has 5 arm axes and Mitsubishi Electric ASSISTA RV-5AS-D has 6 arm axes. A five-axis arm cannot reproduce every six-axis wrist attitude; verify the required tool orientation along the entire approach and exit. Compare tool detection, sensing, machine I/O and recovery as separate delivered functions.
Industries and application fit
For UFACTORY xArm 5 vs Mitsubishi Electric ASSISTA RV-5AS-D, use the actual part and process as the industry filter. Electronics, manufactured-component handling and machine tending are candidate uses when their tool mass, access and quality requirements fit the documented configurations. These are application-selection judgments, not claims that either exact model is installed at a named customer. A food, medical-device or clean-production application additionally requires the correct material, lubrication and protection package; the base model name does not establish hygienic or cleanroom compliance.
Selection issue | UFACTORY xArm 5 | Mitsubishi Electric ASSISTA RV-5AS-D |
|---|---|---|
Tool and workpiece mass | 3 kg named scope; include the complete tool | 5 kg named scope; include the complete tool |
Working reference | 700 mm | 910 mm |
Main configuration boundary | Five axes do not provide arbitrary six-axis wrist orientation; demonstrate every approach and retreat before selecting the platform. | Confirm exact configuration, controller, wrist loading and installation envelope. |
Process approval | Demonstrate the actual loaded path and recovery | Demonstrate the same loaded path and recovery |
Frequently asked questions
Which robot is better for this application?
UFACTORY xArm 5 is the stronger starting point for three-kilogram development or handling tasks whose complete tool path needs only five arm axes, while Mitsubishi Electric ASSISTA RV-5AS-D is worth shortlisting for 5 kg collaborative-platform handling within the documented 910 mm working reference. The final choice depends on the real loaded path, required protection, controls and acceptance results. Neither a higher payload nor a longer reach establishes a universal winner.
What payload should I use for the comparison?
Use 3 kg for the specified UFACTORY xArm 5 example and 5 kg for Mitsubishi Electric ASSISTA RV-5AS-D, subject to all documented load and orientation conditions. Include the tool, adapters, sensors and carried part. Confirm exact configuration, controller, wrist loading and installation envelope.
Does the stated reach guarantee access to my fixture?
No. The comparison gives 700 mm for UFACTORY xArm 5 and 910 mm for Mitsubishi Electric ASSISTA RV-5AS-D using the stated model references. Joint limits, reach reference points, wrist orientation, tool length and collisions determine whether the actual fixture is accessible. Simulate the full approach and exit path.
Can I use the best specifications from every family variant?
No. Keep each named model and revision intact. A different arm length, controller generation or protection option can change the relevant specification. Do not combine one version’s maximum payload with another version’s maximum reach.
Is repeatability the same as finished-part accuracy?
No. The stated values are ±0.1 mm for UFACTORY xArm 5 scope and ±0.03 mm for the competitor scope. Finished-part results also depend on fixtures, TCP calibration, sensing, thermal conditions and tool compliance. Validate the actual process instead of treating catalogue repeatability as a complete accuracy guarantee.
How should purchase prices be compared?
Use current written quotations for UFACTORY xArm 5 and Mitsubishi Electric ASSISTA RV-5AS-D with the same arm, controller, software, tooling and commissioning scope. This comparison does not represent an ATC sales offer or stock confirmation. Historical review figures are not a substitute for a configuration-specific purchase quotation.
Can these robots operate safely next to people without guarding?
These specifications do not establish a safe unguarded installation. Assess the complete task, tool, load and machine interface, then implement and validate the required safeguarding and operating procedures. Do not infer collaborative operation from a compact arm, limited payload or education setting.
What should an acceptance test compare?
Use the same parts, actual tool load, fixture locations, path and quality criteria for UFACTORY xArm 5 and Mitsubishi Electric ASSISTA RV-5AS-D. Check production timing, settling, interruptions and recovery. Include the most difficult loaded approach and retreat. Approve the exact delivered configuration and preserve its final settings.
Related ATC reviews
Specifications describe the model scope identified above. Purchase pricing requires a current configuration-specific quotation. Confirm current manufacturer documentation, local supply, controller compatibility and the exact configuration before purchase.
