Teledyne DALSA Genie Nano-10GigE Review
Updated: 7 days ago
Teledyne DALSA Genie Nano-10GigE is a high-resolution area-scan family with separate 37.7 MP and 67.1 MP configurations. Its current model table provides coherent image and rate choices. Select the exact output and receiver. Price: Request a quote.
The camera should be selected as part of an imaging system rather than evaluated from one headline specification. The useful result is an image that reveals the required feature at the right time, followed by a reliable inspection or measurement decision. This review considers the documented acquisition package, optical implications and practical purchasing scope for Genie Nano-10GigE.
Quick Verdict
Nano-10GigE merits evaluation when a dense image field and network receiving meet the actual inspection requirement. The useful benefit is enough optical information within a maintained host workflow. A compact camera and many pixels do not remove optical, receiving or processing bottlenecks.
Genie Nano-10GigE Technical Specifications
Specification | Value or configuration |
Product | Teledyne DALSA Genie Nano-10GigE |
Image format | Model-specific area image; select the exact ordering code |
Acquisition | Global-Shutter Cmos; Confirm Ordered Model |
Interface | 10GigE Vision; exact mode and model dependent |
Capture rate | Model-specific; no single family-wide operating point |
Interface | 10GBASE-T / GigE Vision |
Current M/C6200 table | 37.7 MP at 18.5 fps |
Current M/C8200 table | 67.1 MP at 13.8 fps |
Pixel pitch | 2.5 µm in the reviewed current model group |
Other link modes | 1, 2.5 or 5GigE described in overview |
Price | Request a quote |
Design and Optical Requirements
The reviewed group uses small pixels and large image grids. Select a lens with suitable coverage and useful contrast over the full field, then verify the smallest feature with the intended lighting. Dense sampling cannot recover information blurred by the optical arrangement. Check the final sensor format and mount before approving a lens or replacement.
Acquisition Speed and Integration
The current table pairs 37.7 MP with 18.5 fps and 67.1 MP with 13.8 fps. Alternative link speeds change receiving scope and achievable operating conditions. Verify the exact output mode with the network adapter, cables and host processing. Any required synchronization should be tested within the complete trigger and result pipeline.
Programming and Image Processing
Preserve exposure, trigger, image region and output representation with the supported receiving configuration. Confirm available controls for the exact camera and firmware. Test representative normal and faulty scenes after a setting changes, and keep accepted reference images with the machine recipe. Automatic brightness or a smaller region should not silently change the information used by the inspection.
Image Data and Host Capacity
Budget the actual width, height, channel count, output representation and selected acquisition frequency together. A family maximum resolution and a family maximum speed can belong to different models. Include transfer overhead, buffers, processing and retained images. Validate the final receiving hardware under the real inspection workload rather than sizing the station from a catalog headline.
Genie Nano-10GigE Applications and Use Cases
Large-area component, surface and metrology imaging can merit a selected-model trial. A measurement method also needs appropriate calibration and validation. Include normal part position and height variation and difficult defects. Capture a complete image and show that the actual inspection finishes with correct part association at the required cadence.
Building a Useful Acceptance Trial
Prepare representative parts or scenes that include the smallest required feature, normal production variation and realistic faults. Confirm the field of view and exposure before tuning the inspection. Record wrong accepts, wrong rejects, missing frames and the complete trigger-to-decision timing. A trial should also show what happens when the expected image is absent or unusable. This connects camera selection to the station's actual acceptance requirement rather than relying on a sharp reference picture.
Genie Nano-10GigE Price and Value
Price: Request a quote. Ask for the complete Genie Nano-10GigE ordering code and an itemized scope covering the camera, suitable optics, receiving hardware, cables, power and commissioning. Compare quotations for the same image format, acquisition mode and integration scope. The cost of a camera component is different from the cost of a working inspection station. Evaluate any financial return with the plant's actual labor, defect, rework and maintenance data; no universal payback period follows from these specifications.
Comparison and Selection
Compare Nano-10GigE with a lower-resolution network camera or another high-bandwidth interface using the same useful feature information. A smaller image can reduce processing load if it preserves the required field. A replacement should be evaluated on complete acquisition and analysis rather than assumed compatible from the GigE Vision label alone.
Ordering, Environment and Lifecycle
Require the exact G6 code, sensor grid, monochrome or color output, mount and power arrangement. Confirm current firmware, acquisition software and supported synchronization. The catalog rounds some rates, so use the current model-level table for acceptance. Keep output and receiving configuration documented with the calibrated inspection recipe.
Pros and Cons
Pros
Model-specific documentation supports a coherent acquisition requirement.
Supported camera controls can preserve a commissioned recipe.
A defined receiver and optical arrangement support a focused trial.
Cons
Family headlines do not establish every model’s operating point.
Optics and receiving hardware remain part of system selection.
Capture rate does not guarantee completed inspection throughput.
Who Should Buy Genie Nano-10GigE?
Shortlist Genie Nano-10GigE when its documented sensor, interface and acquisition mode match the imaging task and the team can demonstrate the complete host pipeline. Use the sample trial to establish whether the relevant features remain distinguishable under the expected lighting, presentation and motion. Before purchase, settle the optical configuration, ordering variants and support requirements. The best choice is the configuration that satisfies the acceptance criteria with a maintainable system architecture.
Genie Nano-10GigE FAQ
What current image formats are described?
37.7 MP and 67.1 MP configurations in the reviewed model group.
What current rates are paired with them?
18.5 fps and 13.8 fps respectively in the current table.
What network interface is described?
10GBASE-T with GigE Vision.
Does another link speed guarantee the same rate?
No. Confirm the selected operating mode and receiving limits.
Do more pixels guarantee better metrology?
No. Validate optics, geometry, calibration and the measurement method.
Can a GigE replacement be accepted without a trial?
No. Verify output interpretation, timing and complete inspection behavior.
What is the price?
Price: Request a quote for the exact camera, optics, receiving hardware, power, cables and commissioning.
What should acceptance verify?
Verify useful optical information, complete image delivery, trigger association and the actual result under the intended machine workload.
Price: Request a quote. Final configuration, pricing, availability and support terms depend on the supplier's current quotation.
