Tecnotion TB Linear Motors Review: Specs, Price and Applications
Tecnotion TB is a iron-core linear-motor family. Its current manufacturer table lists 760 – 1900 N continuous force and 1600 – 4000 N peak force across the selected configurations. These are motor-family limits, not a payload or finished-stage accuracy specification.
Quick Verdict
A useful heavy-duty direct-drive candidate when the required force and repeated duty fit the selected coil. Include magnetic attraction and load-support requirements in the mechanical layout.
Tecnotion TB Linear Motors at a Glance
Specification | Details |
Family | TB |
Topology | iron-core linear motor |
Current manufacturer continuous force | 760 – 1900 N |
Current manufacturer peak force | 1600 – 4000 N |
Manufacturer ultimate-force limit | 1800 – 4500 N; separate from peak and continuous limits |
Coil Units | TB12 – TB15 – TB18 – TB24 – TB30 |
Magnet Plates | TB192 – TB288 |
Design and Engineering Assessment
Force density can reduce motor size without reducing the load imposed on guidance. The carriage bearings and mounting structure still support attraction, process load and accelerating mass.
High-speed acceleration should be evaluated with the full moving structure and cable arrangement. A motor force rating does not directly establish a permissible workpiece payload or positioning accuracy.
Force and the Motion Cycle
A linear motor applies force directly to the moving mechanism without a screw or belt transmission. Select the motor against acceleration, external process forces and the repeated thermal duty. Peak force supports a transient interval, while continuous force depends on winding losses and cooling. The useful operating point belongs to the selected coil, magnetic track and drive configuration.
Ironless and iron-core arrangements create different magnetic and mechanical tradeoffs. An ironless design can avoid iron-related cogging, while an iron-core design can introduce attraction forces that affect guidance and mounting. Neither topology removes the need to control the air gap, support the moving load and provide a suitable position-measurement system.
Guidance, Feedback and Thermal Integration
The motor components do not usually provide a complete guided axis. Bearings, track support, structural alignment and the encoder mounting must be designed together. Magnetic assembly forces can be significant, so fixtures and a controlled installation procedure are part of the integration effort. Changes to track geometry also need to preserve the intended commutation relationship.
The encoder measures a particular point on the moving structure. Cable forces, carriage compliance and thermal drift can still influence the position or process result elsewhere on the load. Evaluate the useful measurement point and the complete error budget rather than assuming that a fine encoder increment establishes the same accuracy everywhere.
Control and Acceptance
The selected drive must support the winding and feedback arrangement and provide the necessary continuous and peak current. Establish direction, commutation and limits before enabling full motion. Tune the loaded mechanism and assess tracking, settling or constant-velocity behavior against the actual process requirement. Faster electronic updates cannot compensate for an inadequately supported track or flexible structure.
Acceptance should include representative load, stroke, velocity and stationary dwell at operating temperature. Check service routing through the entire travel envelope, including reference and fault-recovery movements. Retain the coil and track identities, encoder alignment, drive parameters and geometry so that a replacement can restore the qualified axis rather than merely its mechanical appearance.
Applications and Selection
OEM precision linear-motion axes using a matched TB coil, magnetic track, guidance and controller.
For Tecnotion TB Linear Motors, define the actual machine duty before selecting an ordering configuration. Include the required operating point, available installation space, environment and control interfaces. The specification table describes the product or family; the surrounding machine determines which of those features matters for the intended job.
Price and Value
Price: Request a quote for the exact configuration. Compare the product, compatible control equipment, required mechanical parts, cabling and commissioning as one installed system. A component price alone does not represent the cost of a working automation axis.
Evaluate an alternative against the same duty and acceptance criteria. Match the continuous operating requirement first, then compare transient capability, feedback, mechanical fit and support. This avoids choosing between superficially similar products whose ratings describe different operating conditions.
Pros and Cons
Advantages
Iron-core direct-drive construction
Documented continuous and transient force classes
Limitations
Requires OEM guidance, feedback and thermal integration
Family limits must be resolved to an exact coil and winding
Who Should Consider Tecnotion TB Linear Motors?
Consider Tecnotion TB Linear Motors for oEM precision linear-motion axes using a matched TB coil, magnetic track, guidance and controller. Establish the required operating point and installation interfaces before choosing the configuration, and use a representative loaded cycle as the acceptance basis.
Tecnotion TB Linear Motors FAQ
What is Tecnotion TB Linear Motors?
Tecnotion TB is a iron-core linear-motor family.
Which specifications matter most?
Family: TB. Topology: iron-core linear motor. Interpret the remaining ratings within the selected configuration and operating duty.
What applications should it be considered for?
OEM precision linear-motion axes using a matched TB coil, magnetic track, guidance and controller.
What is the main advantage?
Iron-core direct-drive construction. Documented continuous and transient force classes.
What limitation affects integration?
Requires OEM guidance, feedback and thermal integration. Family limits must be resolved to an exact coil and winding.
What is the price?
Request a quote for the selected model, options and delivery terms. Any stated example price applies only to its identified seller configuration and may change.
How should an alternative be compared?
Use the same operating duty, installation envelope and acceptance requirements. Compare the complete system, including the compatible drive or controller, mechanical interfaces and commissioning effort.
What should be specified when ordering?
State the complete model or configuration, intended operating point, mechanical interfaces and required control equipment. Include the relevant environment, accessories and quantity so that the quotation describes a usable system.
Prices are indicative and may change. Confirm the final configuration, commercial terms and delivery schedule before ordering.
