Synapticon ACTILINK-S Integrated Servo Motors Review: Specs, Price and Applications
ACTILINK-S combines a servo motor, SOMANET Integro drive and absolute encoder. Five listed models cover 200–1,000 W, with peak torque up to 13 N.m. Fieldbus choices include EtherCAT, PROFINET IRT and EtherNet/IP.
Quick Verdict
A useful decentralized axis when removing a separate cabinet drive improves the machine layout. Select the network variant and thermal installation as carefully as the motor’s mechanical envelope.
Synapticon ACTILINK-S Integrated Servo Motors at a Glance
Specification | Details |
Listed models | Five; SC 6-1 through SC 8-2 |
Power span | 200–1,000 W |
Peak-torque ceiling | Up to 13 N.m |
Encoder | 18-bit batteryless multiturn absolute |
Feedback increments | 262,144 per revolution |
Fieldbus options | EtherCAT, PROFINET IRT or EtherNet/IP |
Smallest listed housing | 60 × 60 × 104 mm |
Design and Engineering Assessment
Combining drive and motor moves heat and electronics onto the axis. The cabinet can become simpler, while the local mounting, ambient conditions and service access become more important to continuous duty.
Eighteen-bit feedback provides 262,144 digital increments per revolution, but that number alone does not establish angular accuracy. The complete encoder implementation and mechanics determine the load-side result.
Decentralizing the Axis
An integrated motor and drive moves power electronics onto the driven axis. This can reduce the need for a separate cabinet amplifier and simplify part of the wiring, while creating local requirements for heat dissipation, supply distribution and service access. The machine layout should be evaluated as a whole rather than assuming that moving electronics automatically reduces every installation cost.
The selected motor, winding and local drive must support the required continuous and intermittent duty. An integrated package still dissipates heat in the motor and electronics, and its installation can affect the available thermal path. Evaluate the actual motion cycle and ambient conditions before applying a peak-torque or peak-power figure to continuous operation.
Network, Feedback and Power
Select the communication variant to match the controller and its intended drive profile. Point-to-point command modes and cyclic synchronous modes divide responsibilities differently between controller and drive. Enable sequencing, communication timeout and fault recovery must be defined for the selected architecture rather than inferred from the fieldbus name alone.
Absolute feedback can simplify referencing, but digital resolution and actual position accuracy remain different quantities. The machine’s useful result also depends on mounting, coupling and the driven mechanism. Supply wiring, grounding and connector selection must support the electrical duty even when the product combines several functions in a single housing.
Commissioning and Maintainability
Check direction, feedback interpretation, network configuration and the intended stop behavior before running full motion. Tune and evaluate the complete loaded mechanism, including repeated moves and warm operation. If the selected unit offers a safety function, incorporate the exact function and wiring into the machine’s defined safety architecture.
A compact integrated package makes the full ordering code particularly important. The replacement must restore motor, drive, encoder and network options together. Preserve the parameter set, mechanical datum and commissioning procedure so that a later exchange returns the axis to the qualified operating condition.
Applications and Selection
Packaging, handling, laboratory and medical equipment, semiconductor machinery and mobile robots.
For Synapticon ACTILINK-S Integrated Servo Motors, define the actual machine duty before selecting an ordering configuration. Include the required operating point, available installation space, environment and control interfaces. The specification table describes the product or family; the surrounding machine determines which of those features matters for the intended job.
Price and Value
Price: Request a quote for the exact configuration. Compare the product, compatible control equipment, required mechanical parts, cabling and commissioning as one installed system. A component price alone does not represent the cost of a working automation axis.
Evaluate an alternative against the same duty and acceptance criteria. Match the continuous operating requirement first, then compare transient capability, feedback, mechanical fit and support. This avoids choosing between superficially similar products whose ratings describe different operating conditions.
Pros and Cons
Advantages
Motor, drive and feedback in one assembly
Several industrial network variants
Limitations
Local heat dissipation must support the duty
Network and safety options require exact configuration
Who Should Consider Synapticon ACTILINK-S Integrated Servo Motors?
A useful decentralized axis when removing a separate cabinet drive improves the machine layout. Select the network variant and thermal installation as carefully as the motor’s mechanical envelope.
Synapticon ACTILINK-S Integrated Servo Motors FAQ
What is Synapticon ACTILINK-S Integrated Servo Motors?
ACTILINK-S combines a servo motor, SOMANET Integro drive and absolute encoder.
Which specifications matter most?
Listed models: Five; SC 6-1 through SC 8-2. Power span: 200–1,000 W. Interpret the remaining ratings within the selected configuration and operating duty.
What applications should it be considered for?
Packaging, handling, laboratory and medical equipment, semiconductor machinery and mobile robots.
What is the main advantage?
Motor, drive and feedback in one assembly. Several industrial network variants.
What limitation affects integration?
Local heat dissipation must support the duty. Network and safety options require exact configuration.
What is the price?
Request a quote for the selected model, options and delivery terms. Any stated example price applies only to its identified seller configuration and may change.
How should an alternative be compared?
Use the same operating duty, installation envelope and acceptance requirements. Compare the complete system, including the compatible drive or controller, mechanical interfaces and commissioning effort.
What should be specified when ordering?
State the complete model or configuration, intended operating point, mechanical interfaces and required control equipment. Include the relevant environment, accessories and quantity so that the quotation describes a usable system.
Prices are indicative and may change. Confirm the final configuration, commercial terms and delivery schedule before ordering.
