Stäubli MPS 1530 Customized Tool Changer Review: Specs, Price and Applications
The Stäubli MPS 1530 Customized is a large-payload automatic tool changer based on the MPS 630 design, rated to 1,530 kg.
It handles 12,500 Nm static and 43,750 Nm dynamic moment, repeats to 0.01 mm, stands 100 mm coupled and offers 7 module places. Base units, transmission and safety modules and deposit stations are configured per process.
Quick Verdict
Built for the heaviest robot work, where tool exchange still has to be fast and safe.
Stäubli MPS 1530 Customized Tool Changer at a Glance
Specification | Details |
Product type | Automatic robotic tool changer |
Family | MPS CUSTOMIZED |
Max. payload | 1,530 kg |
Max. static moment | 12,500 Nm |
Max. dynamic moment | 43,750 Nm |
Locking | Pneumatic ball locking, 0.45 – 1.2 MPa |
Repeatability | 0.01 mm |
Height (coupled) | 100 mm |
Robot flange | ISO 9409-1-200-6-M12 / 200-16-M16 |
Module places | 7 |
Price | Request a quote |
Design and Operating Principle
An automatic tool changer splits into a robot-side master plate and a tool-side plate. A pneumatic locking mechanism, here ball locking, clamps the two together, while transmission modules pass air, vacuum, coolant, signals and power across the joint so one robot can run many tools.
Stäubli's MPS line comes in three families: MPS COMPLETE, pre-configured units for standard jobs; MPS MODULAR, where the buyer chooses coupling technology and transmission module positions; and MPS CUSTOMIZED, engineered units for very large payloads and many modules.
Static moment rates the load the coupling holds at rest, while dynamic moment covers acceleration and braking during fast robot motion. Size the changer on the dynamic value with the tool's centre of gravity offset included.
Integration and Selection
Match the robot adapter to the flange standard listed, then pick transmission modules for every medium the tools need: air, vacuum, coolant, signals, power and data.
Plan tool stands, tool identification and locking sensing in the robot program so a change cannot start unless the tool is seated and locked.
Check the coupled height against reach and tool clearance, and size the air supply to the locking pressure range.
Industry Applications
Industry | Typical use |
Heavy equipment | Very large part handling |
Automotive | Heavy fixtures and frames |
Aerospace | Large assemblies |
Energy | Heavy component handling |
Functional Uses
Heavy-payload tool exchange
Safety module integration
Custom media transfer
Pros and Cons
Advantages
1,530 kg capacity
Safety module option
Limitations
Custom lead time
7 module places
Who Should Consider the Stäubli MPS 1530 Customized Tool Changer?
Automotive plants, integrators and manufacturers that run several tools on one robot and need a changer rated to 1,530 kg.
Price and Availability
Price: Request a quote. Stäubli prices the MPS 1530 by base unit, transmission modules, adapter plates and tool stands.
Further Reading
Stäubli MPS 1530 Customized Tool Changer FAQ
What payload does the MPS 1530 handle?
Up to 1,530 kg.
What repeatability does it offer?
0.01 mm.
What media can it transfer?
Pneumatics, vacuum, cooling, signal and power supply and primary current through transmission modules.
How does it lock?
Pneumatic ball locking at 0.45 to 1.2 MPa.
How much does it cost?
Pricing depends on configuration; request a quote from Stäubli.
