Stäubli MPS 080 Modular Tool Changer Review: Specs, Price and Applications
The Stäubli MPS 080 Modular is an automatic tool changer for payloads up to 80 kg in the MPS MODULAR family, where the buyer configures modules and their positions.
It handles 286 Nm static and 1,001 Nm dynamic moment, repeats to 0.01 mm, stands 67 mm coupled and offers 5 to 10 module places on an ISO 9409-1-80 flange. Systems ship fully assembled from a code-based order, and modules can be repositioned later.
Quick Verdict
A configurable, future-proof changer for medium robots whose media needs may change.
Stäubli MPS 080 Modular Tool Changer at a Glance
Specification | Details |
Product type | Automatic robotic tool changer |
Family | MPS MODULAR |
Max. payload | 80 kg |
Max. static moment | 286 Nm |
Max. dynamic moment | 1,001 Nm |
Locking | Pneumatic ball locking, 0.45 – 1.0 MPa |
Repeatability | 0.01 mm |
Height (coupled) | 67 mm |
Robot flange | ISO 9409-1-80-6-M8 |
Module places | 5 to 10 |
Price | Request a quote |
Design and Operating Principle
An automatic tool changer splits into a robot-side master plate and a tool-side plate. A pneumatic locking mechanism, here ball locking, clamps the two together, while transmission modules pass air, vacuum, coolant, signals and power across the joint so one robot can run many tools.
Stäubli's MPS line comes in three families: MPS COMPLETE, pre-configured units for standard jobs; MPS MODULAR, where the buyer chooses coupling technology and transmission module positions; and MPS CUSTOMIZED, engineered units for very large payloads and many modules.
Static moment rates the load the coupling holds at rest, while dynamic moment covers acceleration and braking during fast robot motion. Size the changer on the dynamic value with the tool's centre of gravity offset included.
Integration and Selection
Match the robot adapter to the flange standard listed, then pick transmission modules for every medium the tools need: air, vacuum, coolant, signals, power and data.
Plan tool stands, tool identification and locking sensing in the robot program so a change cannot start unless the tool is seated and locked.
Check the coupled height against reach and tool clearance, and size the air supply to the locking pressure range.
Industry Applications
Industry | Typical use |
Automotive | Body-in-white and assembly tool changes |
General industry | Multi-tool robot cells |
Metalworking | Gripper and process tool exchange |
Electronics | Handling and test tooling |
Functional Uses
Spot and process tool exchange
Gripper changes
Multi-media transfer
Pros and Cons
Advantages
Configurable modules
Up to 10 module places
Ships assembled
Limitations
Taller than COMPLETE units
Who Should Consider the Stäubli MPS 080 Modular Tool Changer?
Automotive plants, integrators and manufacturers that run several tools on one robot and need a changer rated to 80 kg.
Price and Availability
Price: Request a quote. Stäubli prices the MPS 080 by base unit, transmission modules, adapter plates and tool stands.
Further Reading
Stäubli MPS 080 Modular Tool Changer FAQ
What payload does the MPS 080 handle?
Up to 80 kg.
What repeatability does it offer?
0.01 mm.
What media can it transfer?
Pneumatics, vacuum, cooling, signal and power supply and primary current through transmission modules.
How does it lock?
Pneumatic ball locking at 0.45 to 1.0 MPa.
How much does it cost?
Pricing depends on configuration; request a quote from Stäubli.
