Stäubli MPS 035 Complete Tool Changer Review: Specs, Price and Applications
The Stäubli MPS 035 Complete is a pre-configured automatic tool changer for payloads up to 35 kg.
It keeps the 46 mm coupled height and ±1.5 μm repeatability of the smaller unit while raising moment capacity to 80 Nm static and 280 Nm dynamic, with 6 module places and an ISO 9409-1-50 flange.
Quick Verdict
A versatile, off-the-shelf changer for mid-size robots running grippers, vacuum tools and process heads.
Stäubli MPS 035 Complete Tool Changer at a Glance
Specification | Details |
Product type | Automatic robotic tool changer |
Family | MPS COMPLETE |
Max. payload | 35 kg |
Max. static moment | 80 Nm |
Max. dynamic moment | 280 Nm |
Locking | Pneumatic ball locking, 0.45 – 1.0 MPa |
Repeatability | ±1.5 μm |
Height (coupled) | 46 mm |
Robot flange | ISO 9409-1-50, 4-M6 |
Module places | 6 |
Price | Request a quote |
Design and Operating Principle
An automatic tool changer splits into a robot-side master plate and a tool-side plate. A pneumatic locking mechanism, here ball locking, clamps the two together, while transmission modules pass air, vacuum, coolant, signals and power across the joint so one robot can run many tools.
Stäubli's MPS line comes in three families: MPS COMPLETE, pre-configured units for standard jobs; MPS MODULAR, where the buyer chooses coupling technology and transmission module positions; and MPS CUSTOMIZED, engineered units for very large payloads and many modules.
Static moment rates the load the coupling holds at rest, while dynamic moment covers acceleration and braking during fast robot motion. Size the changer on the dynamic value with the tool's centre of gravity offset included.
Integration and Selection
Match the robot adapter to the flange standard listed, then pick transmission modules for every medium the tools need: air, vacuum, coolant, signals, power and data.
Plan tool stands, tool identification and locking sensing in the robot program so a change cannot start unless the tool is seated and locked.
Check the coupled height against reach and tool clearance, and size the air supply to the locking pressure range.
Industry Applications
Industry | Typical use |
Automotive | Body-in-white and assembly tool changes |
General industry | Multi-tool robot cells |
Metalworking | Gripper and process tool exchange |
Electronics | Handling and test tooling |
Functional Uses
Gripper exchange
Vacuum tool swaps
Process tool changes
Pros and Cons
Advantages
High moment for its height
6 module places
Ready to use
Limitations
Fixed configuration family
35 kg limit
Who Should Consider the Stäubli MPS 035 Complete Tool Changer?
Automotive plants, integrators and manufacturers that run several tools on one robot and need a changer rated to 35 kg.
Price and Availability
Price: Request a quote. Stäubli prices the MPS 035 by base unit, transmission modules, adapter plates and tool stands.
Further Reading
Stäubli MPS 035 Complete Tool Changer FAQ
What payload does the MPS 035 handle?
Up to 35 kg.
What repeatability does it offer?
±1.5 μm.
What media can it transfer?
Pneumatics, vacuum, cooling, signal and power supply and primary current through transmission modules.
How does it lock?
Pneumatic ball locking at 0.45 to 1.0 MPa.
How much does it cost?
Pricing depends on configuration; request a quote from Stäubli.
