Standard Bots Spark Review: Specs, Price and Applications of the 7 kg Robot Arm
Updated: 7 days ago
The Standard Bots Spark is a compact robot arm with a payload of 7 kg, a reach of 900 mm and ±0.025 mm repeatability, listed from USD 29,500. This review covers its specifications, design, programming options, applications and price, so you can judge whether it fits your work.
Quick Verdict
The Spark is the smallest arm in the Standard Bots range. It carries 7 kg over 900 mm, weighs 21 kg and stands on a base under 200 mm across, so it fits on a bench or in a lab. It is programmed without code through the company's app and is designed, assembled and shipped from Glen Cove, New York. It suits small-part handling, assembly, inspection and laboratory work. The maker had not published a linear speed figure when this review was written.
Standard Bots Spark at a Glance
Payload: 7 kg
Reach: 900 mm
Repeatability: ±0.025 mm
Weight: 21 kg
Footprint: under 200 mm diameter
Price: from USD 29,500
Standard Bots Spark Technical Specifications
The table below lists the published specifications of the Standard Bots Spark.
Specification | Standard Bots Spark |
Manufacturer | Standard Bots |
Model | Spark |
Payload | 7 kg |
Reach | 900 mm |
Repeatability | ±0.025 mm |
Weight | 21 kg |
Footprint | Under 200 mm diameter |
Noise | Typically below 58 dB, depending on speed and payload |
Protection rating | IP65 in the specification table; the maker's FAQ gives IP69K for the arm and IP44 for the control box |
Expected lifetime | 50,000 hours |
Tool connector | M8, 8-pin, with power and I/O through the tool flange |
Linear speed | Not yet published |
Price | From USD 29,500 |
Detailed Technical Data
Ethernet connection at the wrist
Native support for two-finger, three-finger and suction grippers
Collaborative mode and a faster non-collaborative mode
Runs offline once programs are deployed
Configurable camera options and support for third-party vision systems
Compatible with 3D scanners and quality control tools
Design and Build Quality
The Spark is built for places where space is short. At 21 kg, with a base under 200 mm in diameter, it can be placed on a workbench or inside a laboratory enclosure. Power and signals for the tool run through the flange, which keeps cables off the arm. The maker gives a typical noise level below 58 dB and an expected lifetime of 50,000 hours. The published protection ratings are not consistent: the specification table says IP65, while the FAQ gives IP69K for the arm and IP44 for the control box, so buyers who need washdown protection should confirm the rating in writing.
Programming and Software
No-Code App
The Spark is programmed through the Standard Bots app without writing code. Positions can be taught by moving the arm by hand, and programs can be saved and reused.
Developer SDK
For custom integration, Standard Bots offers a developer SDK with full API access.
Vision
The arm can be ordered with camera hardware and works with the company's own AI platform or with third-party vision systems.
Standard Bots Spark Applications and Use Cases
Typical applications for the Spark are pick and place, inspection, small-part assembly and laboratory handling.
Small-Part Assembly and Fastening
Repeatability of ±0.025 mm supports assembly, fastening and screwdriving of small components, where a part must be placed in the same position every cycle.
Laboratory Automation
The small base and low weight suit laboratory tasks such as pipetting, sample sorting and material testing.
Finishing and Inspection
The arm is also used for sanding, polishing and inspection, including work with 3D scanners.
Standard Bots Spark Price and Value
The Standard Bots Spark is listed from USD 29,500 by the manufacturer. Grippers, vision hardware and integration affect the final price and are quoted separately. Prices are indicative, are not final and may change.
For the company behind the robot, read the Standard Bots Company Profile: Funding, Investors, Robots and Leadership.
Pros and Cons
Pros
±0.025 mm repeatability
Compact base under 200 mm and a 21 kg arm
No-code programming with hand guiding
Tool power and I/O through the flange
Built in the United States
Cons
Linear speed not yet published
Inconsistent published protection ratings
7 kg payload limits it to light work
Who Should Buy the Standard Bots Spark?
The Spark fits laboratories, electronics assemblers and small workshops that need an accurate, compact arm for parts up to 7 kg and want to program it without code.
Standard Bots Spark FAQ
How much does the Standard Bots Spark cost?
The Standard Bots Spark is listed from USD 29,500 by the manufacturer. The price is indicative and may change, and it does not include end effectors, vision hardware or integration.
What is the payload and reach of the Standard Bots Spark?
The Spark has a payload of 7 kg and a reach of 900 mm.
How accurate is the Standard Bots Spark?
Its published repeatability is ±0.025 mm.
How much does the Standard Bots Spark weigh?
The arm weighs 21 kg and has a footprint under 200 mm in diameter.
How is the Standard Bots Spark programmed?
Through a no-code app with hand guiding; a developer SDK with full API access is also available.
What is the protection rating of the Standard Bots Spark?
The specification table lists IP65, while the maker's FAQ gives IP69K for the arm and IP44 for the control box.
Where is the Standard Bots Spark made?
It is designed, assembled and shipped from Glen Cove, New York.
What is the Standard Bots Spark used for?
Typical applications are pick and place, inspection, small-part assembly, fastening, sanding and polishing, and laboratory handling.
Specifications and prices are based on manufacturer information. Prices are indicative, are not final and may change.
