REES 04962 102 Cable Operated Switch with Broken Cable Detection Review: Specs, Price and Applications
Updated: 7 days ago
REES 04962-102 is a taut-cable operated control switch with broken/loose-cable detection, latching action and manual reset. Its two normally open and two normally closed contacts form part of a separately engineered machine-control circuit.
Quick Verdict
Consider 04962-102 where a documented cable-operated stop input fits the equipment. Specify the full cable installation and control circuit, then validate actuation, cable-loss response and reset; the switch does not establish the complete machine's stopping performance.
REES 04962 102 Cable Operated Switch with Broken Cable Detection at a Glance
Reviewed article: 04962-102
Contact arrangement: 2 NO + 2 NC; manual reset
Cable behavior: Trips and latches on pull, break or loss of tension
Connection: Manufacturer identifies a pre-wired 12-pin connector
Indication: Red 24 V indicator
Enclosure scope: Manufacturer lists NEMA 12/13 and IP65 under applicable installation conditions
Price: Request a quote for the exact ordering configuration.
Technical Specifications
Specification | Documented configuration |
Reviewed article | 04962-102 |
Contact arrangement | 2 NO + 2 NC; manual reset |
Cable behavior | Trips and latches on pull, break or loss of tension |
Connection | Manufacturer identifies a pre-wired 12-pin connector |
Indication | Red 24 V indicator |
Enclosure scope | Manufacturer lists NEMA 12/13 and IP65 under applicable installation conditions |
Design and Build
A cable-operated switch should be selected with the intended accessible cable route and complete stop circuit. Confirm the pull direction and mounting before detailing the installation. Record the correct article reference rather than substituting a nearby family suffix, because connection, direction and cover arrangements can differ.
Select a cable-operated control device with its complete mechanical installation and electrical circuit. Identify the pull arrangement, supports, mounting and required enclosure conditions. Use the exact device instructions for installation. A catalog photograph cannot define the complete cable run or protective function.
Configuration and Integration
The broken-cable function is meaningful only with the specified mechanical setup. Follow the manufacturer's installation instructions for tension, supports and allowable cable run. The installation needs a defined check for pulling, loosening and broken-cable conditions. Account for the environment and keep a maintenance procedure that can detect changes before operators depend on the cable input.
Document the relationship between actuation, circuit response, reset and permitted restart. Keep the control-circuit drawing and cable installation record together. Match contacts and connections to the approved architecture. Maintenance should restore the accepted arrangement rather than adjust the system from appearance alone.
Applications and Use Cases
Evaluate 04962-102 for a specified machine cable-stop application with an approved cable route, circuit and validation procedure. Confirm the complete delivered reference.
Manual reset restores the switch contacts; the machine's approved restart logic must determine whether operation can resume. Keep reset and starting behavior separate in the circuit and operator procedure. A switch rating or contact arrangement does not determine the whole machine's stopping time or protective performance. Preserve the accepted wiring, cable route and validation evidence for later maintenance.
Assess the switch through the complete machine response and actual cable installation. Device actuation, contact state and stopping behavior are different parts of the result. Use the applicable machine procedure to establish the required function and recovery.
Alternatives and Selection
Compare cable-operated switches using the same route, fault response and control architecture. Include mounting, connection, tension adjustment, reset access and periodic inspection.
Price and Value
Price: Request a quote. The quotation should identify the exact product configuration, included options, delivery terms and support scope. Accessories and integration work should be listed separately so the hardware price can be compared on a like-for-like basis. A family name or headline specification is not a complete purchasing description.
Assess value against the work the product enables in the machine. Include the engineering needed to configure it, the equipment that must operate alongside it and the effort required to maintain or replace it. A lower component price can be outweighed by extra integration work, while additional features are valuable only when the application can use them. Compare written configurations rather than assumed package contents.
Pros and Cons
Pros
Cable pull provides access along a defined equipment route
Broken/loose-cable detection supports an explicit fault response
Latching and manual reset support a documented recovery sequence
Cons
Mechanical installation and tension require correct setup
Full machine stop and restart behavior need validation
Family suffix and connector details must match the ordered device
Who Should Consider REES 04962 102 Cable Operated Switch with Broken Cable Detection?
Consider 04962-102 where a documented cable-operated stop input fits the equipment. Specify the full cable installation and control circuit, then validate actuation, cable-loss response and reset; the switch does not establish the complete machine's stopping performance.
The strongest purchasing case is a clearly defined requirement that matches the documented configuration. If the project depends on a particular option, interface or mechanical arrangement, include it explicitly in the order. Keep the accepted configuration with the equipment documentation so a later replacement preserves the intended application.
Commissioning and Acceptance
Validate the required pull and cable-loss conditions through the approved equipment procedure. Check indication, latching, reset and permitted restart at the actual installation. Preserve device identity, wiring, cable layout and test evidence. Reassess after changing the cable run, mounting or control logic.
REES 04962 102 Cable Operated Switch with Broken Cable Detection FAQ
What is REES 04962 102 Cable Operated Switch with Broken Cable Detection?
REES 04962-102 is a taut-cable operated control switch with broken/loose-cable detection, latching action and manual reset. Its two normally open and two normally closed contacts form part of a separately engineered machine-control circuit.
Which configuration is reviewed?
Reviewed article: 04962-102. Contact arrangement: 2 NO + 2 NC; manual reset.
What is the main selection consideration?
Consider 04962-102 where a documented cable-operated stop input fits the equipment. Specify the full cable installation and control circuit, then validate actuation, cable-loss response and reset; the switch does not establish the complete machine's stopping performance.
What applications should it be considered for?
Evaluate 04962-102 for a specified machine cable-stop application with an approved cable route, circuit and validation procedure. Confirm the complete delivered reference.
What is a documented advantage?
Cable pull provides access along a defined equipment route. Broken/loose-cable detection supports an explicit fault response.
What limitation matters during integration?
Mechanical installation and tension require correct setup. Full machine stop and restart behavior need validation.
What is the price?
Price: Request a quote. Specify the exact ordering configuration, required options, accessories and delivery terms.
How should an alternative be compared?
Compare cable-operated switches using the same route, fault response and control architecture. Include mounting, connection, tension adjustment, reset access and periodic inspection.
Product information: REES 04962-102 manufacturer item specifications, cable-switch range information and the Industrial Safety Controls-authored listing.
Pricing is quotation-based and may change. Options, availability, delivery and application requirements depend on the selected ordering configuration.
