PushCorp AFD82 Passive Force Compliance Device Review: Specs, Price and Applications
The PushCorp AFD82 is a passive compliance device with stronger linear bearings, rated in its specification table at 115 lbf (511 N) with a 40 mm stroke and payload up to 115 lb (52.2 kg).
Versions are AFD82-1 vertical (34 lb), AFD82-2 horizontal and AFD82-3 table top (24 lb). It pairs with STC0612-BT40, SM0612, STC1015 and STC1515 spindles, or SWS100 weld shavers.
Quick Verdict
A stronger passive unit for heavier spindles and weld shaving.
PushCorp AFD82 Passive Force Compliance Device at a Glance
Specification | Details |
Product type | Passive force compliance device |
Max force | 115 lbf (511 N) per spec table |
Resolution | ±1.4 lb/psi |
Stroke | 1.6 in (40 mm) |
Max payload | 115 lb (52.2 kg) |
Versions | Vertical, horizontal, table top |
Sensor | Carriage position sensor |
Price | Request a quote |
Design and Operating Principle
Passive compliance devices are open loop: an external pressure regulator sets air pressure and therefore force. Because gravity acts differently in each orientation, the regulator setting must change when a new orientation is programmed to keep force constant, which makes passive units best for flat or prismatic parts.
Heavier bearings suit higher loads than the AFD72.
Integration and Selection
Pair with large spindles or weld shavers and set pressure per orientation.
Use the AFD92 for the heaviest duty.
Industry Applications
Industry | Typical use |
Automotive | Weld shaving |
Metal fabrication | Grinding |
Foundry | Deburring |
Woodworking | Heavy sanding |
Functional Uses
Weld shaving
Grinding
Polishing
Deburring
Pros and Cons
Advantages
115 lbf
Stronger bearings
Three versions
Limitations
Open-loop
Heavier
Who Should Consider the PushCorp AFD82 Passive Force Compliance Device?
The AFD82 suits heavier passive finishing.
Price and Availability
Price: Request a quote. PushCorp prices the AFD82 by configuration. Budget for the matching compliance device or spindle, FCUFLEX controller or amplifier, media, tool changers, cooling and integration.
Further Reading
PushCorp AFD82 Passive Force Compliance Device FAQ
What is the AFD82?
The PushCorp AFD82 is a passive compliance device with stronger linear bearings, rated in its specification table at 115 lbf (511 N) with a 40 mm stroke and payload up to 115 lb (52.2 kg)..
Which applications suit it?
Weld shaving, Grinding, Polishing, Deburring.
Who makes it?
PushCorp, Inc.
How much does it cost?
Request a quote from PushCorp.
