Pelonis AgroWheel Electric Wheel Drive Review: Specs, Price and Applications
Pelonis AgroWheel integrates a brushless motor, reduction gearbox, position sensor and holding brake for powered field equipment. The listing describes low-voltage power up to 1.5 kW, peak torque up to 215 N.m and speed up to 120 rpm.
Quick Verdict
Relevant for an electrically driven agricultural wheel module when the traction load, environment and duty are established. The listed maximum speed, peak torque and power figures should not be assumed to occur simultaneously.
Pelonis AgroWheel Electric Wheel Drive at a Glance
Specification | Details |
Architecture | Brushless motor, gearbox, sensor and holding brake |
Power reference | Up to 1.5 kW |
Peak torque | Up to 215 N.m |
Speed reference | Up to 120 rpm |
Envelope reference | 290 mm length × 145 mm diameter |
Gearbox | Sealed geared assembly |
Design and Engineering Assessment
Traction sizing starts at the tire-ground interface. Wheel radius, cargo load, slope and soil conditions affect both peak demand and continuous heating, so a bench torque figure is only one part of the vehicle assessment.
The holding brake should be integrated with the drive’s enable and stopping sequence. Its presence does not establish that it can perform repeated dynamic service braking or retain the vehicle under every slope condition.
Output Torque and Speed
A gearmotor combines motor behavior with a reduction stage. The ratio trades speed for output torque, while efficiency and mechanical ratings constrain what the final shaft can deliver. Use the rated output operating point for continuous-duty sizing and keep intermittent limits separate. A maximum torque figure does not establish that the gearbox can repeat that load indefinitely.
For a mobile mechanism, start with the wheel radius, required tractive force, gradient and acceleration. Those requirements translate into output torque and speed, which can then be compared with the gearmotor. Changes in wheel diameter affect both force and vehicle speed, so they should be included in the sizing calculation rather than treated as a cosmetic mechanical change.
Electrical and Mechanical Integration
A brushless gearmotor requires a compatible drive and a suitable low-voltage supply. Confirm how the drive uses Hall or other feedback signals and how current limits relate to the motor and gearbox duty. Battery voltage variation, wiring loss and simultaneous system loads can affect the operating point available at the motor terminals.
The output shaft and bearing arrangement must support the intended mechanical loads. Overhung wheels, belt tension and external impact can impose radial or axial forces beyond the torque requirement. The mounting and driven mechanism should be checked together; sufficient output torque cannot compensate for an unsupported shaft load or poor alignment.
Control and Service Requirements
If the mechanism needs accurate travel or stopping, define the required feedback resolution and where position is measured. Gear backlash and compliance influence load-side positioning, while a motor-side signal may not measure every source of output error. Commission under representative load and include reversals, stopping and warm operation.
Keep the approved drive current, feedback wiring, reduction ratio and mechanical configuration in the service record. A replacement with a similar body size may have a different speed winding, ratio or sensor arrangement. Restoring the complete operating point is more important than matching a superficial appearance.
Applications and Selection
Electric propulsion for agricultural automation and field equipment.
For Pelonis AgroWheel Electric Wheel Drive, define the actual machine duty before selecting an ordering configuration. Include the required operating point, available installation space, environment and control interfaces. The specification table describes the product or family; the surrounding machine determines which of those features matters for the intended job.
Price and Value
Price: Request a quote for the exact configuration. Compare the product, compatible control equipment, required mechanical parts, cabling and commissioning as one installed system. A component price alone does not represent the cost of a working automation axis.
Evaluate an alternative against the same duty and acceptance criteria. Match the continuous operating requirement first, then compare transient capability, feedback, mechanical fit and support. This avoids choosing between superficially similar products whose ratings describe different operating conditions.
Pros and Cons
Advantages
Integrated wheel-drive functions
Position sensing and holding-brake provision
Limitations
Peak ratings require duty-cycle qualification
Outdoor suitability needs exact enclosure and installation data
Who Should Consider Pelonis AgroWheel Electric Wheel Drive?
Relevant for an electrically driven agricultural wheel module when the traction load, environment and duty are established. The listed maximum speed, peak torque and power figures should not be assumed to occur simultaneously.
Pelonis AgroWheel Electric Wheel Drive FAQ
What is Pelonis AgroWheel Electric Wheel Drive?
Pelonis AgroWheel integrates a brushless motor, reduction gearbox, position sensor and holding brake for powered field equipment.
Which specifications matter most?
Architecture: Brushless motor, gearbox, sensor and holding brake. Power reference: Up to 1.5 kW. Interpret the remaining ratings within the selected configuration and operating duty.
What applications should it be considered for?
Electric propulsion for agricultural automation and field equipment.
What is the main advantage?
Integrated wheel-drive functions. Position sensing and holding-brake provision.
What limitation affects integration?
Peak ratings require duty-cycle qualification. Outdoor suitability needs exact enclosure and installation data.
What is the price?
Request a quote for the selected model, options and delivery terms. Any stated example price applies only to its identified seller configuration and may change.
How should an alternative be compared?
Use the same operating duty, installation envelope and acceptance requirements. Compare the complete system, including the compatible drive or controller, mechanical interfaces and commissioning effort.
What should be specified when ordering?
State the complete model or configuration, intended operating point, mechanical interfaces and required control equipment. Include the relevant environment, accessories and quantity so that the quotation describes a usable system.
Prices are indicative and may change. Confirm the final configuration, commercial terms and delivery schedule before ordering.
