Neuromeka Indy12 Review: Specs and Applications of the 12 kg Collaborative Robot
Updated: 7 days ago
The Neuromeka Indy12 is a six-axis collaborative robot with a payload of 12 kg and a reach of 1.8 m. No price was found in the sources used. This review covers its specifications, design, programming options and applications.
Quick Verdict
The Indy12 is the large model in Neuromeka's Indy range. Its reach of 1.8 m is very long for a 12 kg cobot, which suits palletizing and tending of large machines. Like the smaller Indy7 it detects collisions without separate joint torque sensors, can be taught by hand and is programmed from an Android tablet. Its tool speed is limited to 1 m/s. The maker's data sheet does not state weight and repeatability clearly for this model, so those figures are not given here.
Neuromeka Indy12 at a Glance
Payload: 12 kg
Reach: 1.8 m
Axes: 6
Maximum TCP speed: 1 m/s
Joint range: ±360° on all joints
Price: on request
Neuromeka Indy12 Technical Specifications
The table below lists the published specifications of the Neuromeka Indy12.
Specification | Neuromeka Indy12 |
Manufacturer | Neuromeka |
Model | Indy12 |
Axes | 6, all revolute |
Payload | 12 kg |
Reach | 1.8 m |
Joint range | ±360° on all joints |
Maximum joint speeds | J1 and J2 120°/s; J3 to J6 150°/s |
Maximum TCP speed | 1 m/s |
Controller | STEP2 as standard, control at 4 kHz |
Controller interfaces | EtherCAT, 16-pin GPIO, RS485/422, two RS232, Ethernet, optional CAN |
PLC integration | TCP/IP, Modbus and OPC-UA |
Detailed Technical Data
Sensorless collision detection
Impedance control for direct teaching by hand
Expansion port at the wrist for grippers and vision sensors
An Indy12 Pro version includes Neuromeka's IndyEye vision system
Certification marks listed for the Indy range: NSF, NRTL, CE and KC, depending on model
Design and Build Quality
The Indy12 follows the design of the Indy7 at a larger scale. All six joints can turn a full ±360°, which gives freedom in routing the arm around a machine. Collision detection is done by the control algorithms, without a torque sensor in each joint, and the same control allows hand guiding. The standard STEP2 controller runs the control loop at 4 kHz; a STEP3 controller for research reaches 8 kHz with Neuromeka's IndyFramework.
Programming and Software
Tablet Teach Pendant
Programs are created online or offline with a teach pendant application on an Android tablet.
Direct Teaching
Positions are taught by moving the arm by hand.
Industrial Communication
EtherCAT, serial interfaces and Ethernet are available on the controller, and the Indy range supports TCP/IP, Modbus and OPC-UA for connection to a PLC.
Neuromeka Indy12 Applications and Use Cases
The Indy12 is suited to tasks that need reach and a medium payload.
Palletizing
The 1.8 m reach lets the robot stack boxes on a pallet without an additional lifting axis in many cases.
Machine Tending
The arm can reach into large machines and carry heavier workpieces or double grippers.
Handling and Assembly
The 12 kg payload covers general transfer and assembly of medium parts.
Neuromeka Indy12 Price and Value
No published price for the Indy12 was found. As a reference, a European distributor lists the smaller Indy7 at EUR 23,400 excluding VAT; the Indy12 is quoted on request.
For the company behind the product, read the Neuromeka Company Profile: Listing, Location and What Is Known.
Pros and Cons
Pros
1.8 m reach with a 12 kg payload
±360° rotation on all joints
Collision detection without joint torque sensors
Direct teaching and tablet programming
EtherCAT and PLC protocols
Cons
Maximum TCP speed of 1 m/s
Weight and repeatability not clearly stated in the sources used
No published price
Who Should Buy the Neuromeka Indy12?
The Indy12 fits manufacturers that need a long-reach cobot for palletizing and tending of large machines.
Neuromeka Indy12 FAQ
How much does the Neuromeka Indy12 cost?
No published price was found; it is quoted on request.
What is the payload and reach of the Neuromeka Indy12?
The payload is 12 kg and the reach is 1.8 m.
How many axes does the Neuromeka Indy12 have?
The Indy12 has 6 axes.
How fast is the Neuromeka Indy12?
The maximum tool speed is 1 m/s; joints J1 and J2 turn at 120°/s and J3 to J6 at 150°/s.
How is the Neuromeka Indy12 programmed?
With a teach pendant app on an Android tablet and by direct teaching by hand.
Which controller does the Neuromeka Indy12 use?
The STEP2 controller as standard, with EtherCAT, serial and Ethernet interfaces.
Does the Neuromeka Indy12 have vision?
The Indy12 Pro version includes the IndyEye vision system.
What is the Neuromeka Indy12 used for?
Palletizing, machine tending, handling and assembly.
Specifications are based on manufacturer and distributor information and may change.
