LMI Gocator 1300 Review: Specs and Uses of the Smart Laser Point Sensors

The LMI Gocator 1300 is a series of smart laser point sensors that measure distance at a single point at high speed. The manufacturer does not publish prices. This review covers the models, specifications, features and uses.

Quick Verdict

Not every measurement needs a 3D image. Thickness of a sheet, height of a part or roughness of a surface can be read from one laser spot, at lower cost and with less data. The 1300 series is LMI's point sensor: pre-calibrated, compact and built into the same software environment as the profilers, so several can be synchronized into one network. Seven models span ranges from 20 mm to 2 m. The series page omits scan rate, repeatability and weight.

LMI Gocator 1300 at a Glance

• Type: laser point profile sensor

• Models: seven

• Measurement range: 20 mm to 2000 mm

• Resolution Z: from 0.0004 mm

• Calibration: pre-calibrated

• Price: on request

LMI Gocator 1300 Models and Specifications

The table below lists the seven models in the series.

Model	Resolution Z	Clearance distance	Measurement range
1320	0.0004 mm	40 mm	20 mm
1340	0.0005 mm	162.5 mm	95 mm
1350	0.0015 mm	200 mm	200 mm
1365	0.0025 mm	562 mm	375 mm
1370	0.0025 mm	237.5 mm	412.5 mm
1380	0.0100 mm	127 mm	1651 mm
1390	0.0250 mm	500 mm	2000 mm

Scan rate, repeatability, spot size and weight are not stated on the series page.

Design and Build Quality

LMI stresses a small footprint and factory calibration, so the sensor is ready to measure when installed. The models differ mainly in stand-off and range: the 1320 works 40 mm from the part over 20 mm, while the 1390 measures over 2 m.

Software and Integration

Setup

A browser-based interface and an open-source SDK are used for configuration and visualization.

Multi-Sensor Networks

Sensors can be scaled into a synchronized network, for example two opposed sensors for thickness.

Connectivity

Native drivers and industrial protocols connect the sensor to robots and PLCs.

LMI Gocator 1300 Uses

Thickness and Height

LMI cites high-speed dimensional measurements such as object thickness.

Surface Roughness

Surface roughness is named as a typical measurement.

Closed-Loop Control

The sensors are intended for closed-loop automation systems.

LMI Gocator 1300 Price and Value

LMI Technologies does not publish prices for the Gocator 1300 series; quotes are available from the manufacturer and its distributors.

For the company behind the product, read the LMI Technologies Company Profile: Ownership and Products.

Pros and Cons

Pros

• Simple single-point measurement

• Pre-calibrated

• Ranges from 20 mm to 2 m

• Can be synchronized in networks

• Same software family as the profilers

Cons

• One point only, no profile or 3D shape

• Scan rate and repeatability not stated on the series page

• No published prices

Who Should Buy the LMI Gocator 1300?

The series fits processes that need a fast distance or thickness reading for control, such as sheet, web and panel production.

---

LMI Gocator 1300 FAQ

How much does the LMI Gocator 1300 cost?

LMI does not publish prices; they are available on request.

What does the Gocator 1300 measure?

Distance at a single laser point, used for height, thickness and roughness.

Which models are in the Gocator 1300 series?

The 1320, 1340, 1350, 1365, 1370, 1380 and 1390.

What is the longest range in the Gocator 1300 series?

2000 mm, on the 1390.

What is the best resolution in the Gocator 1300 series?

0.0004 mm, on the 1320.

Is the Gocator 1300 calibrated?

Yes. It is pre-calibrated and ready to measure.

Can several Gocator 1300 sensors work together?

Yes. They can be scaled into a synchronized multi-sensor network.

What is the Gocator 1300 used for?

High-speed dimensional measurement and closed-loop automation.

Specifications are based on manufacturer information and may change.