LINAK LA12 Electric Linear Actuators Review: Specs, Price and Applications
LINAK LA12 is an electric linear actuator with current manufacturer family limits of 750 N maximum load, 40 mm/s maximum speed and 19–130 mm stroke choices. These endpoints refer to selected configurations and should not be combined into a single assumed operating point.
Quick Verdict
A practical short-stroke option when the installed length, duty cycle and selected load-speed point fit the mechanism.
LINAK LA12 Electric Linear Actuators at a Glance
Specification | Details |
Model family | LA12 |
Drive | Electric linear actuator |
Maximum load | 750 N |
Maximum speed | 40 mm/s |
Stroke range | 19–130 mm |
Design and Engineering Assessment
A short stroke does not determine the actuator’s closed installation length. Check the pivot-to-pivot dimensions, end fittings and clearance through the entire movement before selecting a drop-in replacement.
The maximum load and maximum speed describe different selection limits. Use the chosen spindle pitch and operating-load curve rather than treating 750 N at 40 mm/s as a guaranteed simultaneous point.
From Motor Rotation to Linear Motion
A screw actuator converts rotary motion into axial travel. Screw lead, gearing and motor behavior determine the relationship between force and speed. A motor torque rating cannot be treated as linear thrust without the transmission relationship and efficiency. The selected screw also introduces mechanical load and lifetime constraints.
Maximum force, top speed, stroke and duty cycle are separate selection limits. They may describe different gearing, windings or operating conditions. Establish a full motion cycle with acceleration, load, dwell and reversal before comparing an electric actuator with another screw drive, a pneumatic cylinder or a hydraulic arrangement.
Mounting, Guidance and Holding
The mechanism should keep the actuator within its specified axial, side-load and moment limits. End fittings, pivot alignment and the support structure influence whether the rod is loaded as intended. Longer strokes can introduce additional column-loading and clearance considerations even when required thrust remains unchanged.
Self-locking, braking and power-off holding depend on the selected transmission and options. Do not infer a complete load-retention function from a screw or gear label. A vertical or spring-loaded mechanism needs a defined response to an interrupted command and loss of power, based on the actual machine arrangement.
Electrical Integration and Acceptance
Choose the motor supply and control interface for the exact actuator configuration. An integrated controller, external servo drive and stepper pulse interface divide responsibility differently. Feedback can observe actuator travel while the external linkage still adds compliance, clearance or geometric error at the workpiece.
Acceptance should use the real load and repeated cycle. Check speed under load, heating, reversals, end behavior and the useful position or force requirement. Preserve winding, screw lead, stroke, feedback, brake and control options so that a service replacement restores the qualified assembly rather than a similar-looking housing.
Applications and Selection
Compatible industrial or OEM mechanisms requiring the selected LA12 stroke, thrust and control arrangement.
For LINAK LA12 Electric Linear Actuators, define the actual machine duty before selecting an ordering configuration. Include the required operating point, available installation space, environment and control interfaces. The specification table describes the product or family; the surrounding machine determines which of those features matters for the intended job.
Price and Value
Price: Request a quote for the exact configuration. Compare the product, compatible control equipment, required mechanical parts, cabling and commissioning as one installed system. A component price alone does not represent the cost of a working automation axis.
Evaluate an alternative against the same duty and acceptance criteria. Match the continuous operating requirement first, then compare transient capability, feedback, mechanical fit and support. This avoids choosing between superficially similar products whose ratings describe different operating conditions.
Pros and Cons
Advantages
Defined force, speed and stroke configuration choices
Compact electrically driven linear-motion arrangement
Limitations
Family maxima do not describe one simultaneous operating point
Duty cycle, mounting and interface require the exact configuration
Who Should Consider LINAK LA12 Electric Linear Actuators?
Consider LINAK LA12 Electric Linear Actuators for compatible industrial or OEM mechanisms requiring the selected LA12 stroke, thrust and control arrangement. Establish the required operating point and installation interfaces before choosing the configuration, and use a representative loaded cycle as the acceptance basis.
LINAK LA12 Electric Linear Actuators FAQ
What is LINAK LA12 Electric Linear Actuators?
LINAK LA12 is an electric linear actuator with current manufacturer family limits of 750 N maximum load, 40 mm/s maximum speed and 19–130 mm stroke choices.
Which specifications matter most?
Model family: LA12. Drive: Electric linear actuator. Interpret the remaining ratings within the selected configuration and operating duty.
What applications should it be considered for?
Compatible industrial or OEM mechanisms requiring the selected LA12 stroke, thrust and control arrangement.
What is the main advantage?
Defined force, speed and stroke configuration choices. Compact electrically driven linear-motion arrangement.
What limitation affects integration?
Family maxima do not describe one simultaneous operating point. Duty cycle, mounting and interface require the exact configuration.
What is the price?
Request a quote for the selected model, options and delivery terms. Any stated example price applies only to its identified seller configuration and may change.
How should an alternative be compared?
Use the same operating duty, installation envelope and acceptance requirements. Compare the complete system, including the compatible drive or controller, mechanical interfaces and commissioning effort.
What should be specified when ordering?
State the complete model or configuration, intended operating point, mechanical interfaces and required control equipment. Include the relevant environment, accessories and quantity so that the quotation describes a usable system.
Prices are indicative and may change. Confirm the final configuration, commercial terms and delivery schedule before ordering.
