KUKA KR SCARA KR 6 R500 Review: Specs, Price and Applications of the 6 kg Robot
Updated: 2 days ago
KUKA KR SCARA KR 6 R500 is listed with a 6 kg payload, 500 mm reach, ±0.02 mm repeatability, and an indicative price From USD 10,000.
Quick Verdict
KUKA KR SCARA KR 6 R500 is a SCARA robot built around 6 kg payload capacity and 500 mm reach. The product listing associates it with assembly, pick and place, testing. The main selection question is whether its published working envelope and controller fit the intended cell.
For buyers comparing automation options, this model is best evaluated against the part mass, tool mass, cycle path and installation geometry together. The catalog price is a starting point and does not describe a complete integrated cell.
KR SCARA KR 6 R500 at a Glance
Payload 6 kg
Reach 500 mm
Axes 4
Repeatability ±0.02 mm
Speed 166 cycles per minute (25/305/25 mm cycle, 1 kg)
Weight 20 kg
Starting price From USD 10,000 (indicative)
KR SCARA KR 6 R500 Technical Specifications
Published catalog specifications for the KR SCARA KR 6 R500 are summarized below.
Specification | KUKA KR SCARA KR 6 R500 |
Robot type | SCARA robot |
Payload | 6 kg |
Reach | 500 mm |
Axes | 4 |
Repeatability | ±0.02 mm |
Published speed | 166 cycles per minute (25/305/25 mm cycle, 1 kg) |
Weight | 20 kg |
Mounting | floor |
Controller | KUKA KR C5 micro |
Price | From USD 10,000 (indicative) |
Design and Build Quality
The catalog identifies the KR SCARA KR 6 R500 as a SCARA robot with 4 axes. Its listed mounting options are floor. The intended work envelope and tool package should be checked during cell design.
Protection and Operating Environment
Environmental suitability depends on the configured robot and the process environment. Confirm the exact protection requirements with KUKA or the supplier before specifying the cell.
Footprint and Weight
The listed robot weight is 20 kg. The published reach is 500 mm; floor-space and service clearances should be checked against the manufacturer's layout data.
Programming and Software
Controller and Operator Programming
The product record specifies KUKA KR C5 micro. KUKA College training materials cover programming and operating KUKA robot systems; confirm the controller generation, software version and teach-pendant package supplied with the specific configuration.
Industrial Communication
The product record lists these interfaces: PROFINET; PROFIsafe; EtherNet/IP; CIP Safety; EtherCAT; Ethernet; 16 digital inputs / 16 digital outputs. Confirm the controller options and safety communication needed by the cell.
KR SCARA KR 6 R500 Applications and Use Cases
Assembly
The product listing identifies assembly as a supported application area for the KR SCARA KR 6 R500. Verify payload at the required reach, tooling, cycle time and part presentation in the intended process.
Pick and place
The product listing identifies pick and place as a supported application area for the KR SCARA KR 6 R500. Verify payload at the required reach, tooling, cycle time and part presentation in the intended process.
KR SCARA KR 6 R500 Price and Value
The All Things Cobots product listing shows From USD 10,000 for the KR SCARA KR 6 R500. This is an indicative catalog price, not a final quotation; a complete installation can also require a controller package, tooling, safety measures, commissioning and integration.
Comparison with Epson Robots
Model | Payload | Reach | Axes | Starting price |
KUKA KR SCARA KR 6 R500 | 6 kg | 500 mm | 4 | From USD 10,000* |
Epson Robots LS6-B502 | 6 kg | 500 mm | 4 | From USD 10,000* |
The comparison uses specifications and starting prices in the All Things Cobots catalog. These are different models and configurations; compare the documented payload, reach, axes and quote scope for the target application.
Pros and Cons
Pros
Payload and reach: 6 kg payload capacity with 500 mm reach.
Application fit: the catalog lists assembly, pick and place, testing.
Controller: KUKA KR C5 micro
Cons
Motion range: 4 axes provide less tool-orientation freedom than a six-axis arm.
System sizing: payload, reach, end effector and installation requirements must be validated together.
Who Should Buy the KR SCARA KR 6 R500?
The KR SCARA KR 6 R500 merits evaluation by manufacturers whose task matches the listed 6 kg payload, 500 mm reach and 4-axis motion, especially for assembly, pick and place, testing. It suits a project team ready to validate cycle performance, controller configuration, tooling and safety requirements before purchase.
See the full All Things Cobots KR SCARA KR 6 R500 product listing
KR SCARA KR 6 R500 FAQ
How much does the KUKA KR SCARA KR 6 R500 cost?
The All Things Cobots catalog lists this model From USD 10,000. The figure is indicative; a final price may change with configuration and project scope.
What payload and reach are listed for the KUKA KR SCARA KR 6 R500?
The catalog lists a payload of 6 kg and reach of 500 mm.
How many axes does the KUKA KR SCARA KR 6 R500 have?
The product listing specifies 4 axes.
Which controller is listed for the KUKA KR SCARA KR 6 R500?
The product listing identifies KUKA KR C5 micro.
What applications are listed for the KUKA KR SCARA KR 6 R500?
Listed applications include assembly, pick and place, testing, electronics handling. The final cell should be validated against the part, tooling and required cycle.
Which interfaces are listed for the KUKA KR SCARA KR 6 R500?
The product listing includes PROFINET; PROFIsafe; EtherNet/IP; CIP Safety; EtherCAT; Ethernet; 16 digital inputs / 16 digital outputs.
What should buyers confirm before selecting the KUKA KR SCARA KR 6 R500?
Confirm that the published payload, reach, number of axes, controller and available interfaces match the process and cell layout; validate the tooling and safeguards with the system integrator.
Is the KUKA KR SCARA KR 6 R500 a collaborative robot?
This model is listed as an industrial robot. Specify and integrate it with the safeguards and risk assessment required for the application.
Prices are indicative, listed in USD, and may change. Confirm current pricing, configuration and availability with the supplier.
