Kawasaki BA013N vs Panasonic TM Series: Robot Comparison
Updated: 3 hours ago
IN A NUTSHELL
🔎 THE KEY DIFFERENCE Kawasaki BA013N has the higher stated load capacity and longer stated reach. Those figures help shortlist it for heavier loads or wider layouts, but do not prove a faster production cycle. |
→ CONSIDER Kawasaki BA013N Consider it when additional load capacity and reach matter. This article compares 13 kg and a 1,492 mm stated reach; include the gripper and part in the load. |
→ CONSIDER Panasonic TM Series Consider it when its stated load and reach already cover your task and its controls fit your equipment. This article compares 6 kg and a 1,163 mm stated reach; include the gripper and part in the load. |
💡 THE TAKEAWAY Choose the robot that handles your actual tool and part through the required path, with controls and support your team can use. Compare complete installation quotes, rather than arm-only prices. |
Kawasaki BA013N vs Panasonic TM Series is a choice about arc welding and process access. Kawasaki BA013N and Panasonic TM Series differ in their working envelope, loading assumptions and engineering ecosystem. A useful decision starts with the exact mechanism and process, then checks whether either robot can execute the required path with the real tool attached. This comparison separates documented specifications from application-level engineering judgments.
Kawasaki BA013N vs Panasonic TM Series: quick verdict
Shortlist Kawasaki BA013N for arc-welding access using the named 13 kg / 1492 mm process-arm configuration. Shortlist Panasonic TM Series for arc-welding access using the named 6 kg / 1163 mm process-arm configuration. Neither is a universal winner: a robot that can carry the load may still fail the fixture-access, controller or maintenance requirements.
The numerical comparison below uses Kawasaki BA013N against Panasonic TM Series. The stated model scope matters when comparing later revisions or differently equipped installations. Published repeatability describes return to a taught position under specified conditions; it does not establish complete-cell accuracy or prove a faster production cycle.
Specifications and exact configuration scope
Criterion | Kawasaki BA013N | Panasonic TM Series |
|---|---|---|
Comparison configuration | Kawasaki BA013N | Panasonic TM Series |
Payload used for comparison | 13 kg | 6 kg |
Reach / motion-area reference | 1492 mm | 1163 mm |
Axes | 6 | 6 |
Repeatability for this scope | ±0.04 mm | ±0.08 mm |
Controller reference | Confirm offered Kawasaki controller | the supplied model-specific control package |
Purchase-price basis | Configuration-specific quotation | Configuration-specific quotation |
Purchase pricing | From $37,300 (arm list price) | Request a configuration-specific quote |
Read the reach row together with the geometric notes below. Manufacturers may specify an arm-link sum, a wrist-centre motion area or reach to the flange; those dimensions are not interchangeable. The table does not establish access to every point at every tool angle. Controller references identify reviewed packages, and actual compatibility must be confirmed by model, software version and region.
Kawasaki BA013N: design and configuration
The Kawasaki BA013N is a 6-axis arc welding robot with a 13 kg payload, a reach of 1492 mm and a positional repeatability of ±0.04 mm. It is designed for arc welding of metal parts and assemblies. The robot weighs 260 kg and mounts on the floor or the ceiling. Keep the exact suffix, controller generation, wrist load diagram and protection package in the order scope. A different family member’s reach, high-speed rating or controller options must not be transferred to this configuration.
Panasonic TM Series: design and configuration
The Panasonic TM Series comparison uses one fixed six-axis reference: TM1100, 6 kg payload, 1163 mm reach and ±0.08 mm repeatability. Family names cover several distinct arm lengths and wrist limits; the numerical example never combines their maxima. The arm is a welding manipulator, not a complete weld process. Match the supplied G-series controller revision, power source, torch, wire feed, cooling and selected arc or touch-sensing functions. An externally routed torch package and an internally routed package have different service and clearance requirements. Gun or torch cabling adds load and restricts the working envelope even when the wrist mass remains inside the headline rating. Check approach angles, seam endpoints, recovery after arc failure, dress-pack fatigue and access for consumables. Repeatable flange motion does not establish weld penetration or joint quality. Qualify the actual material, joint preparation, weld procedure and fixture stiffness, then measure the complete loaded cycle rather than inferring production rate from a joint-speed figure.
For this pair, Panasonic TM Series offers 6 kg over the stated 1163 mm reference, compared with 13 kg and 1492 mm for Kawasaki BA013N example. Kawasaki BA013N has the larger stated distance by 329 mm, but this difference is only a preliminary layout indicator because reference points and joint envelopes can differ. Locate the actual fixture in each manufacturer model before treating this as usable extra working space.
Payload, tooling and a worked load example
Consider an illustrative total wrist load of 4.8 kg: a 1.2 kg tool and adapter package carrying a 3.6 kg part or product group. This arithmetic leaves 8.2 kg below the Kawasaki BA013N example’s nominal limit and 1.2 kg below Panasonic TM Series’s nominal limit. These are mass differences, not safety factors or a validated load approval. A heavy camera, valve block or retained material must be included before recalculating the total.
The example exposes the practical question: is the application limited by mass, by tool offset or by wrist rotation? Panasonic TM Series is the lower-or-equal nominal payload choice in this pair. Kawasaki BA013N offers more or equal headline mass capacity, but that alone cannot approve an eccentric fixture. Moving the same mass farther from the flange increases the moment, and spreading it increases rotational inertia. Manufacturer load diagrams and the actual centre of gravity govern the final allowable motion.
Model the empty, partly loaded and fully loaded tool states separately. A vacuum layer gripper, a weld torch with hoses or an inspection head may change its effective loading during the cycle. Set the controller’s load data for each supported state and validate the transition logic. A payload table cannot predict acceleration derating, cable pull or transient reactions at a machine interface.
Reach, orientation and fixture access
Build the same cell model for both candidates: base height, machine opening, fixture datum, maximum part size, tool extension and access for maintenance. Kawasaki BA013N provides a stated 1492 mm reference, while Panasonic TM Series provides 1163 mm. Check the deepest production pose and the return path with the loaded tool. An arm that just touches the target at full extension may have little freedom left to turn, retract or avoid a door.
For the welding comparison, include the actual torch angle, nozzle length, seam approach and cable package. Simulate seam starts and ends as well as continuous travel. A pose that looks accessible with an empty flange may become blocked after the torch, wire feeder and fixtures are installed. Validate touch sensing or seam-tracking options only where they are part of the supplied package.
Precision and throughput: compare the same task
The comparison uses ±0.04 mm for Kawasaki BA013N and ±0.08 mm for Panasonic TM Series. These figures should be read in their documented configuration scope. Repeatability is not absolute accuracy, camera calibration accuracy or finished-part capability. Fixture variation, TCP calibration, thermal conditions and tool compliance can dominate the error at the process point, especially when the tool extends far from the flange.
Ask each integrator to execute the same representative path with the same payload model, tool length, process dwell and stop conditions. Report transfer time, settling time, process time and waiting time separately. Published standard cycles often use different loads and distances; dividing one catalogue cycle by another would not establish the production advantage of Kawasaki BA013N over Panasonic TM Series. Use a measured or validated application cycle before assigning a throughput benefit.
Programming, controls and production integration
Kawasaki BA013N is paired here with Confirm offered Kawasaki controller, while Panasonic TM Series uses the supplied model-specific control package. Controller names identify the review baseline rather than a guarantee that all interface options are included. Compare the actual software revision, teaching workflow, diagnostic tools, fieldbus licences and recovery procedures. An existing trained team and reusable production code may outweigh a small dimensional advantage. Obtain a demonstration of the same machine handshake and interrupted-cycle recovery on both platforms.
Specify the PLC handshakes before ordering: cycle request, ready, busy, complete, fault, part present and recovery authorization. Define how an interrupted operation resumes without repeating a dangerous or quality-critical action. Vision, force sensing, fieldbus communication and external-axis coordination must be checked as explicit included or optional functions. An Ethernet connector does not by itself prove that a particular industrial protocol or software interface is licensed and supported.
Configuration and communication detail
Integration reference | Kawasaki BA013N | Panasonic TM Series |
|---|---|---|
Control package | Confirm offered Kawasaki controller | the supplied model-specific control package |
Documented interface baseline | Specify required interfaces in the delivered package | Specify required interfaces in the delivered package |
Programming baseline | Named platform software and supported API; confirm supplied version | Named platform software and supported API; confirm supplied version |
Integration acceptance | Test the actual machine handshake and controlled recovery | Test the same handshake and controlled recovery |
Protection, installation and maintenance
Match the precise protection package to the process. Standard, protected, cleanroom, foundry and washing configurations can have different seals, services and maintenance requirements. Do not transfer the best optional IP or cleanroom rating to an unprotected base model. Check the controller location, cable bend radius, available lifting access and base reactions with the installer.
Treat safe operation as a property of the complete task and installation. Include the tool, sharp workpiece edges, trapping points, dropped loads and machine access. These robot systems require task-specific safeguarding; payload or compact size does not establish safe unguarded operation. Plan tool replacement and fault recovery without dismantling the whole installation, and include connector access, lubrication and spare-cable replacement in the maintenance layout.
Price and lifecycle value
Published arm list prices: Kawasaki BA013N is listed from $37,300. Request configuration-specific quotations for Kawasaki BA013N and Panasonic TM Series. An arm-only number is not the price of a commissioned production cell. Ask for separate line items for controller, pendant, communication options, end effector, safety equipment, installation, acceptance, training and warranty. Price changes, regional support and included software can reverse an apparent hardware-cost advantage. Compare the same delivered scope before calculating payback.
Compare the installed production scope: tool, fixtures, sensing, guarding, machine interface, programming, acceptance and training. For welding, include the power source, wire feed, torch cleaning, extraction and seam options. Keep purchase cost and recurring support costs separate. No payback figure is defensible until the actual cycle, yield, utilization and installation quotation are known.
Selection and acceptance plan
Decision gate | Kawasaki BA013N | Panasonic TM Series |
|---|---|---|
Strongest documented fit | arc-welding access using the named 13 kg / 1492 mm process-arm configuration | arc-welding access using the named 6 kg / 1163 mm process-arm configuration |
Main boundary | Torch, cables, wire feed, power-source interface and seam recovery must match the quoted package; arm geometry does not supply a complete welding cell. | Torch, cables, wire feed, power-source interface and seam recovery must match the quoted package; arm geometry does not supply a complete welding cell. |
Required approval | Exact Kawasaki variant, tool load and validated process path | Exact competitor revision, tool load and validated process path |
Acceptance evidence | Agreed parts, path, quality and recovery results | The same agreed parts, path, quality and recovery results |
Advance Kawasaki BA013N when arc-welding access using the named 13 kg / 1492 mm process-arm configuration solves the real constraint and its selected configuration passes the load and access checks. Advance Panasonic TM Series when arc-welding access using the named 6 kg / 1163 mm process-arm configuration provides the more suitable process arrangement. Reject either candidate if a mandatory pose, protection requirement or controller function cannot be demonstrated. A purchasing shortlist should preserve these conditions instead of converting a single catalogue advantage into a blanket recommendation.
Before acceptance, agree the representative parts, tool states, operating sequence and quality criteria with both suppliers. Demonstrate cold start, normal production, rejected parts, interrupted cycles and controlled recovery. Record the final tool data and software backup. This turns the comparison into a repeatable purchasing decision and helps prevent a later fixture change from invalidating the original robot selection.
Motion architecture and functionality
Kawasaki BA013N has 6 arm axes and Panasonic TM Series has 6 arm axes. Both have six arm axes; equal axis counts do not establish equal joint travel, inner workspace or fixture access. Compare tool detection, sensing, machine I/O and recovery as separate delivered functions.
Industries and application fit
For Kawasaki BA013N vs Panasonic TM Series, use the actual part and process as the industry filter. Electronics, manufactured-component handling and machine tending are candidate uses when their tool mass, access and quality requirements fit the documented configurations. These are application-selection judgments, not claims that either exact model is installed at a named customer. A food, medical-device or clean-production application additionally requires the correct material, lubrication and protection package; the base model name does not establish hygienic or cleanroom compliance.
Selection issue | Kawasaki BA013N | Panasonic TM Series |
|---|---|---|
Tool and workpiece mass | 13 kg named scope; include the complete tool | 6 kg named scope; include the complete tool |
Working reference | 1492 mm | 1163 mm |
Main configuration boundary | Torch, cables, wire feed, power-source interface and seam recovery must match the quoted package; arm geometry does not supply a complete welding cell. | Torch, cables, wire feed, power-source interface and seam recovery must match the quoted package; arm geometry does not supply a complete welding cell. |
Process approval | Demonstrate the actual loaded path and recovery | Demonstrate the same loaded path and recovery |
Frequently asked questions
Which robot is better for this application?
Kawasaki BA013N is the stronger starting point for arc-welding access using the named 13 kg / 1492 mm process-arm configuration, while Panasonic TM Series is worth shortlisting for arc-welding access using the named 6 kg / 1163 mm process-arm configuration. The final choice depends on the real loaded path, required protection, controls and acceptance results. Neither a higher payload nor a longer reach establishes a universal winner.
What payload should I use for the comparison?
Use 13 kg for the specified Kawasaki BA013N example and 6 kg for Panasonic TM Series, subject to all documented load and orientation conditions. Include the tool, adapters, sensors and carried part. Torch, cables, wire feed, power-source interface and seam recovery must match the quoted package; arm geometry does not supply a complete welding cell.
Does the stated reach guarantee access to my fixture?
No. The comparison gives 1492 mm for Kawasaki BA013N and 1163 mm for Panasonic TM Series using the stated model references. Joint limits, reach reference points, wrist orientation, tool length and collisions determine whether the actual fixture is accessible. Simulate the full approach and exit path.
Can I use the best specifications from every family variant?
No. Keep each named model and revision intact. A different arm length, controller generation or protection option can change the relevant specification. Do not combine one version’s maximum payload with another version’s maximum reach.
Is repeatability the same as finished-part accuracy?
No. The stated values are ±0.04 mm for Kawasaki BA013N scope and ±0.08 mm for the competitor scope. Finished-part results also depend on fixtures, TCP calibration, sensing, thermal conditions and tool compliance. Validate the actual process instead of treating catalogue repeatability as a complete accuracy guarantee.
How should purchase prices be compared?
Use current written quotations for Kawasaki BA013N and Panasonic TM Series with the same arm, controller, software, tooling and commissioning scope. This comparison does not represent an ATC sales offer or stock confirmation. Historical review figures are not a substitute for a configuration-specific purchase quotation.
Can these robots operate safely next to people without guarding?
These specifications do not establish a safe unguarded installation. Assess the complete task, tool, load and machine interface, then implement and validate the required safeguarding and operating procedures. Do not infer collaborative operation from a compact arm, limited payload or education setting.
What should an acceptance test compare?
Use the same parts, actual tool load, fixture locations, path and quality criteria for Kawasaki BA013N and Panasonic TM Series. Check production timing, settling, interruptions and recovery. Include seam access and the supplied welding functions. Approve the exact delivered configuration and preserve its final settings.
Related ATC reviews
Specifications describe the model scope identified above. Purchase pricing requires a current configuration-specific quotation. Confirm current manufacturer documentation, local supply, controller compatibility and the exact configuration before purchase.
