JAI SW-4000T-10GE Line Scan Camera Review
Updated: 7 days ago
JAI SW-4000T-10GE is an industrial line-scan configuration based on three prism-mounted cmos sensors: rgb. This source-based review distinguishes the documented channels, receiving and cadence without claiming hands-on testing. Price: Request a quote.
The camera should be selected as part of an imaging system rather than evaluated from one headline specification. The useful result is an image that reveals the required feature at the right time, followed by a reliable inspection or measurement decision. This review considers the documented acquisition package, optical implications and practical purchasing scope for SW-4000T-10GE.
Quick Verdict
SW-4000T-10GE merits evaluation when 4096 samples per line and channel and the selected channel architecture resolve the inspection. Two pixel-area modes, binning, color conversion, precision time protocol and encoder connection are documented. These controls change the acquisition contract. A line rate describes acquired lines, not complete two-dimensional images or accepted objects per second. Movement supplies the other scene dimension, so useful spatial sampling and complete system timing should be agreed before selecting the camera.
SW-4000T-10GE Technical Specifications
Specification | Value or configuration |
Product | JAI SW-4000T-10GE |
Image format | 4096 samples per line and channel |
Acquisition | Cmos Line Acquisition |
Interface | 10GBASE-T with lower-rate negotiation |
Capture rate | RGB up to 97 kHz; YUV up to 145 kHz; reduced-width ROI has another operating point |
Line sampling | 4096 samples per line and channel |
Sensor architecture | Three prism-mounted CMOS sensors: RGB |
Receiver | 10GBASE-T with lower-rate negotiation |
Documented rate scope | RGB up to 97 kHz; YUV up to 145 kHz; reduced-width ROI has another operating point |
Model distinction | Two pixel-area modes, binning, color conversion, precision time protocol and encoder connection are documented. These controls change the acquisition contract. |
Price | Request a quote |
Design and Optical Requirements
Choose useful working width, smallest required feature and appropriate sensor coverage together. Across-track samples alone do not determine motion-direction detail. The line illumination must provide stable useful signal at the accepted exposure, including edge regions. For color or NIR, verify the spectrum and compatible optics rather than selecting lighting only by visible brightness. Test focus, distortion, glare and the intended surface-height variation.
Acquisition Speed and Integration
RGB up to 97 kHz; YUV up to 145 kHz; reduced-width ROI has another operating point. 10GBASE-T with lower-rate negotiation is the documented receiving architecture. Pair the selected representation and line spacing with object movement. Ethernet negotiation to a lower link speed does not preserve maximum payload automatically. Camera Link requires a compatible frame grabber; PoCL support needs the correct power path. Verify complete acquired lines and downstream result association under sustained processing load.
Programming and Image Processing
Preserve exposure, output representation, gain, supported corrections and movement-related controls with the accepted inspection. Color conversion and spatial compensation can change interpretation; they are not substitutes for independent samples. Binning may alter useful detail and numeric response. Confirm whether the selected task consumes raw channels, reconstructed color or converted values, then version that processing contract with the acquisition settings.
Image Data and Host Capacity
Budget useful samples per line, delivered channels, bytes per sample and acquired lines per second. Mono, RGB, RGB+NIR, YUV and packed bilinear outputs have different payload and host interpretation. A channel count is not area-image height. Include transfer overhead, buffers, registration and retained strips. Validate the actual receiver and analysis pipeline before equating maximum acquisition cadence with completed production inspection.
SW-4000T-10GE Applications and Use Cases
Color print, surface or material inspection requiring three-channel prism imaging can merit a trial with representative samples and controlled motion. Define the smallest visible fault and include normal lighting, material and height variation. Register separate color lines where the selected sensor requires it. For dimensional measurement, qualify encoder spacing and geometry against references. A sharp sample strip or a high catalog rate does not establish accepted defect detection or measurement uncertainty.
Building a Useful Acceptance Trial
Prepare representative parts or scenes that include the smallest required feature, normal production variation and realistic faults. Confirm the field of view and exposure before tuning the inspection. Record wrong accepts, wrong rejects, missing frames and the complete trigger-to-decision timing. A trial should also show what happens when the expected image is absent or unusable. This connects camera selection to the station's actual acceptance requirement rather than relying on a sharp reference picture.
SW-4000T-10GE Price and Value
Price: Request a quote. Ask for the complete SW-4000T-10GE ordering code and an itemized scope covering the camera, suitable optics, receiving hardware, cables, power and commissioning. Compare quotations for the same image format, acquisition mode and integration scope. The cost of a camera component is different from the cost of a working inspection station. Evaluate any financial return with the plant's actual labor, defect, rework and maintenance data; no universal payback period follows from these specifications.
Comparison and Selection
Compare this exact configuration with another line-scan camera at equal working width, motion spacing, exposure and accepted result. Two pixel-area modes, binning, color conversion, precision time protocol and encoder connection are documented. These controls change the acquisition contract. Color representations, binning and sensor layouts can change useful information as well as payload. Include receiver, optical coverage, line illumination, motion measurement and supported software. Avoid transferring the maximum rate of a different Sweep model or interface suffix.
Ordering, Environment and Lifecycle
Request the current full ordering code, sensor/output scope, supported line modes, receiver, software, mount and environmental requirements. Preserve motion geometry, trigger or encoder controls, exposure, corrections and accepted references. Test restart, missing-line behavior and supported camera replacement. A service intervention should restore spatial/color interpretation and association with the actual moving material, not merely display live data.
Pros and Cons
Pros
An explicit line and channel architecture supports a focused optical trial.
Documented interface and cadence enable concrete receiver planning.
Preserved movement and acquisition settings support reproducible strips.
Cons
Line rate does not establish complete scene or inspection throughput.
Channel layout and color representation require model-specific interpretation.
Lighting, motion geometry and receiving remain system responsibilities.
Who Should Buy SW-4000T-10GE?
Shortlist SW-4000T-10GE when its documented sensor, interface and acquisition mode match the imaging task and the team can demonstrate the complete host pipeline. Use the sample trial to establish whether the relevant features remain distinguishable under the expected lighting, presentation and motion. Before purchase, settle the optical configuration, ordering variants and support requirements. The best choice is the configuration that satisfies the acceptance criteria with a maintainable system architecture.
SW-4000T-10GE FAQ
What spatial sampling is described?
4096 samples per line and channel.
What sensor architecture applies?
Three prism-mounted CMOS sensors: RGB.
What receiving interface is identified?
10GBASE-T with lower-rate negotiation.
What acquisition rates are documented?
RGB up to 97 kHz; YUV up to 145 kHz; reduced-width ROI has another operating point. Confirm the exact output and mode.
Is a line rate the same as area-image fps?
No. Scene construction also depends on movement and the number of acquired lines.
Are neighboring Sweep variants interchangeable?
No. Sensor layout, representation, mount and receiver can change the image contract.
What is the price?
Price: Request a quote for the exact camera, lens, line illumination, receiver, motion controls and commissioning.
What should acceptance verify?
Useful spatial/color detail, line completeness, movement registration, correct decisions, end-to-end timing and restoration.
Price: Request a quote. Final configuration, pricing, availability and support terms depend on the supplier's current quotation.
