DFK 36CX415-I67 Review: Protected FPD-Link Camera
Updated: 7 days ago
The Imaging Source DFK 36CX415-I67 provides a 3840 × 2160 image with rolling-shutter acquisition through FPD-Link III. Its documented frame-rate configuration is Up to 30 fps. Price: Request a quote.
The camera should be selected as part of an imaging system rather than evaluated from one headline specification. The useful result is an image that reveals the required feature at the right time, followed by a reliable inspection or measurement decision. This review considers the documented acquisition package, optical implications and practical purchasing scope for DFK 36CX415-I67.
Quick Verdict
The DFK 36CX415-I67 addresses protected embedded acquisition using FPD-Link III rather than a direct USB or GigE host path. The manufacturer lists the model discontinued, so it is particularly relevant to support and migration planning. Its environmental rating depends on the specified complete assembly.
DFK 36CX415-I67 at a Glance
Product: The Imaging Source DFK 36CX415-I67
Image format: 3840 × 2160
Acquisition: Rolling
Interface: FPD-Link III
Capture rate: Up to 30 fps
Sensor: Sony STARVIS IMX415 CMOS
Optical format: 1/2.8-inch
Pixel size: 1.45 µm
Body: 36 × 36 × 60.3 mm, listed configuration
Environmental protection: IP6K6 / IP6K7 with prescribed tube and certified cables
Lifecycle: Listed discontinued by manufacturer
Price: Request a quote
DFK 36CX415-I67 Technical Specifications
Specification | Value or configuration |
Product | The Imaging Source DFK 36CX415-I67 |
Image format | 3840 × 2160 |
Acquisition | Rolling |
Interface | FPD-Link III |
Capture rate | Up to 30 fps |
Sensor | Sony STARVIS IMX415 CMOS |
Optical format | 1/2.8-inch |
Pixel size | 1.45 µm |
Body | 36 × 36 × 60.3 mm, listed configuration |
Environmental protection | IP6K6 / IP6K7 with prescribed tube and certified cables |
Lifecycle | Listed discontinued by manufacturer |
Price | Request a quote |
Design and Optical Requirements
The sensor uses 1.45 µm pixels and a rolling shutter. Evaluate optics and exposure against scene motion, because rows are acquired at different times. The protective lens tube is part of the environmental configuration. Lens choice must satisfy both image coverage and the tube’s mechanical envelope.
Acquisition Speed and Integration
FPD-Link III requires a compatible deserializer and host camera path; it is not a standard Ethernet camera connection. The directory describes extended sensor-to-computer cabling, but the actual supported cable and receiving configuration should be specified for the system. Validate image timing, row-motion effects and multi-camera association where relevant.
Programming and Image Processing
The documented capabilities include FPD-Link III image acquisition, model-specific embedded camera controls. Use those controls to establish a repeatable acquisition recipe for the station. Determine which adjustments are performed in the camera and which belong in the host software. Store the chosen settings with the inspection configuration so an operator or service technician can reproduce the image used during commissioning. A parameter change should be evaluated against both good and faulty samples before it becomes the production default.
Image Data and Host Capacity
As an engineering estimate, a 3840 × 2160 frame represented as one uncompressed 8-bit value per pixel contains about 8.29 MB of pixel data, using decimal megabytes. This excludes transport overhead and metadata. It is a sizing example, not a measured camera transfer rate; other output representations change the data volume. Multiply the selected frame size by the planned acquisition rate when budgeting host memory, processing and storage, then validate the complete pipeline under realistic load.
DFK 36CX415-I67 Applications and Use Cases
Protected embedded observation and computer-vision installations can merit evaluation when this interface is already part of the system. For a moving platform, include the intended angular and translational motion in the trial. An ingress rating addresses prescribed environmental tests, not a guarantee of reliable perception under every outdoor condition.
Building a Useful Acceptance Trial
Prepare representative parts or scenes that include the smallest required feature, normal production variation and realistic faults. Confirm the field of view and exposure before tuning the inspection. Record wrong accepts, wrong rejects, missing frames and the complete trigger-to-decision timing. A trial should also show what happens when the expected image is absent or unusable. This connects camera selection to the station's actual acceptance requirement rather than relying on a sharp reference picture.
DFK 36CX415-I67 Price and Value
Price: Request a quote. Ask for the complete DFK 36CX415-I67 ordering code and an itemized scope covering the camera, suitable optics, receiving hardware, cables, power and commissioning. Compare quotations for the same image format, acquisition mode and integration scope. The cost of a camera component is different from the cost of a working inspection station. Evaluate any financial return with the plant's actual labor, defect, rework and maintenance data; no universal payback period follows from these specifications.
Comparison and Selection
A USB industrial camera has a different receiving architecture and cable arrangement. A current protected embedded replacement should be compared on sensor response, rolling or global exposure, deserializer support, host drivers and the complete sealing arrangement. Similar image dimensions do not establish compatibility with an installed 36C station.
Ordering, Environment and Lifecycle
The manufacturer’s discontinued-products list names DFK 36CX415-I67 and also lists relevant FPD deserializer boards as discontinued. Request a coordinated replacement and support plan. The catalog says full protection requires correctly mounted original lens tube and specified IP67 FAKRA cables; omitted or incompatible accessories change the environmental scope.
Pros and Cons
Pros
Documented 3840 by 2160 STARVIS image format.
Defined protected camera assembly.
FPD-Link III architecture for embedded receiving systems.
Cons
Discontinued camera and receiving-system lifecycle require planning.
Rolling shutter needs motion evaluation.
Protection depends on the prescribed complete assembly.
Who Should Buy DFK 36CX415-I67?
Shortlist DFK 36CX415-I67 when its documented sensor, interface and acquisition mode match the imaging task and the team can demonstrate the complete host pipeline. Use the sample trial to establish whether the relevant features remain distinguishable under the expected lighting, presentation and motion. Before purchase, settle the optical configuration, ordering variants and support requirements. The best choice is the configuration that satisfies the acceptance criteria with a maintainable system architecture.
DFK 36CX415-I67 FAQ
What is the native resolution of DFK 36CX415-I67?
3840 × 2160 pixels is the documented native image format. Evaluate the optics and required feature scale alongside that pixel count.
Which shutter architecture does it use?
The documented sensor uses a rolling shutter. The acquisition must account for row-by-row timing when the object or camera moves.
What interface is required?
FPD-Link III is the documented acquisition interface. Match the receiving hardware and software to the exact ordering configuration.
What is the maximum frame rate?
The documented rate is Up to 30 fps. Confirm the specified operating mode; maximum capture rate is not a guarantee of completed inspection throughput.
Which acquisition features are documented?
The product information includes FPD-Link III image acquisition, model-specific embedded camera controls. Configure the selected functions around the actual trigger and image-processing requirement.
What should be included in a system comparison?
A USB industrial camera has a different receiving architecture and cable arrangement. A current protected embedded replacement should be compared on sensor response, rolling or global exposure, deserializer support, host drivers and the complete sealing arrangement. Similar image dimensions do not establish compatibility with an installed 36C station.
How much does the camera cost?
Price: Request a quote. Include the exact camera variant, optics, receiving hardware, power, cables and commissioning.
What should be tested before ordering?
Test representative good and faulty samples, the intended optical geometry, image timing, capture diagnostics and the complete result association with each inspected part.
Price: Request a quote. Final configuration, pricing, availability and support terms depend on the supplier's current quotation.
