IAI ELECYLINDER Review: Features and Uses of the Electric Actuator Run Like a Valve
Updated: 7 days ago
The IAI ELECYLINDER is a family of electric actuators designed to be as simple to use as air cylinders. The manufacturer does not publish a price. This review covers its specifications, features and uses.
Quick Verdict
ELECYLINDER is IAI's answer to engineers who like air cylinders for their simplicity. The controller is inside the actuator, and it is operated with ON/OFF signals just like a solenoid valve: go forward, go back. Setup consists of entering the positions, speed and acceleration, about five minutes according to IAI, and speed and acceleration are adjusted by percentage. The family is broad: grippers, sliders, rods, rotary and belt types, stopper cylinders, a wire cylinder and compact versions as narrow as 20 mm. The ultra-large slider lifts 120 kg vertically over 2800 mm. Repeatability and most stroke figures are not stated on the overview page.
IAI ELECYLINDER at a Glance
Control: Built-in controller; ON/OFF signals
Setup: Position, speed and acceleration entry; about 5 minutes
Types: Gripper, slider, wide slider, rod, radial, rotary, belt, stopper, wire cylinder, compact
Ultra Large Slider: Up to 120 kg vertical; 2800 mm
Narrowest: EC-S2/RR2, 20 mm wide
Price: on request
IAI ELECYLINDER Features
The table below lists what the manufacturer states.
Specification | IAI ELECYLINDER |
Manufacturer | IAI Corporation |
Control | Built-in controller; ON/OFF signals |
Setup | Position, speed and acceleration entry; about 5 minutes |
Types | Gripper, slider, wide slider, rod, radial, rotary, belt, stopper, wire cylinder, compact |
Ultra Large Slider | Up to 120 kg vertical; 2800 mm |
Narrowest | EC-S2/RR2, 20 mm wide |
Compact type | 59.5 mm body with controller and motor |
Options | MF functions for pushing, inspection and predictive maintenance |
Repeatability, speed and most strokes are not stated on the overview page.
Design and Build Quality
Motor, encoder and controller are integrated in the actuator body, so no control cabinet space is needed.
Software and Integration
Simple Signals
Operation is the same as a solenoid valve: forward, back and stop.
MF Option
Adds pushing, inspection, positioning and predictive functions.
IAI ELECYLINDER Applications and Use Cases
Replacing Air Cylinders
Electric motion with the same simplicity.
Gripping and Stopping
Gripper and stopper types.
Lifting
Heavy vertical moves with the ultra-large slider.
IAI ELECYLINDER Price and Value
IAI does not publish a price for the IAI ELECYLINDER; it is quoted on request.
For the company behind the product, read the IAI Corporation Company Profile: History, Products and Global Subsidiaries.
Pros and Cons
Pros
Run like a valve
Setup in minutes
No separate controller
Very wide range
Adjustable speed and acceleration
Cons
Repeatability not on the overview
Fewer positions than full controllers
No published price
Who Should Buy the IAI ELECYLINDER?
It fits machine builders who want to swap air cylinders for electric motion without programming.
IAI ELECYLINDER FAQ
How much does the IAI ELECYLINDER cost?
IAI does not publish a price for the IAI ELECYLINDER; it is quoted on request.
What is the IAI ELECYLINDER?
An electric actuator with a built-in controller, run by ON/OFF signals.
How is ELECYLINDER controlled?
Like a solenoid valve, with simple ON/OFF signals.
How long does setup take?
About five minutes, according to IAI.
What types of ELECYLINDER exist?
Grippers, sliders, rods, rotary, belt, stopper, wire and compact types.
How much can the largest slider lift?
Up to 120 kg vertically over 2800 mm.
How small is the smallest ELECYLINDER?
The EC-S2/RR2 is 20 mm wide.
Does it need a separate controller?
No, the controller is built in.
Specifications are based on manufacturer information and may change.
