Hanwha HCR-14 Review: Specs, Price and Applications of the 14 kg Collaborative Robot
Updated: 2 days ago
The Hanwha HCR-14 is a 6-axis collaborative robot with a maximum payload of 14 kg, a reach of 1420 mm and ±0.04 mm repeatability, listed from USD 38,600. This review covers its full specifications, design, programming options, applications and price, so you can decide whether it fits your automation project.
Quick Verdict
The HCR-14 is a six-axis collaborative robot from Hanwha Robotics with a 14 kg payload and 1,420 mm reach. Despite that capacity the arm weighs only 42 kg and stands on a Ø190 mm base. Repeatability of ±0.04 mm and a linear speed of 1.5 m/s are paired with joint speeds of up to 270°/s. The arm is sealed to IP66, and its controller adds EtherNet/IP alongside TCP/IP and Modbus TCP. It is listed from USD 38,600.
Hanwha HCR-14 at a Glance
Maximum payload: 14 kg
Reach: 1420 mm
Axes: 6
Repeatability: ±0.04 mm
Speed: 1.5 m/s linear speed; joint speeds up to 270°/s
Weight: : 42 kg. Footprint: Ø190 mm. IP rating: IP66. Mounting: floor, wall (up to 30°) or ceiling. Noise level: 65 dBA or less. Joint ranges: J1, J2, J4, J5, J6 ±360°, J3 ±165°. Joint speeds: J1-J2 155°/s, J3 230°/s, J4-J6 270°/s. Tool supply: 24 VDC, 3 A
Controller: Control cabinet, 550 x 482 x 251 mm, 25.2 kg, 100-240 VAC 50-60 Hz, max 3.6 kW; 12.1-inch teach pendant
Price: from USD 38,600
Hanwha HCR-14 Technical Specifications
The table below lists the published specifications of the Hanwha HCR-14.
Specification | Hanwha HCR-14 |
Manufacturer | Hanwha Robotics |
Model | HCR-14 |
Robot type | 6-axis collaborative robot |
Maximum payload | 14 kg |
Reach | 1420 mm |
Axes | 6 |
Repeatability | ±0.04 mm |
Speed | 1.5 m/s linear speed; joint speeds up to 270°/s |
Controller | Control cabinet, 550 x 482 x 251 mm, 25.2 kg, 100-240 VAC 50-60 Hz, max 3.6 kW; 12.1-inch teach pendant |
Interfaces | TCP/IP, Modbus TCP, EtherNet/IP, controller I/O with 16 digital inputs, 16 digital outputs, 2 analog inputs, 2 analog outputs and 2 incremental encoder inputs, two M8 8-pin tool connectors, each with 2 digital inputs and 2 digital outputs, EtherCAT tool port |
Certifications | CE |
Starting price | From USD 38,600 |
Detailed Technical Data
Weight: 42 kg. Footprint: Ø190 mm. IP rating: IP66. Mounting: floor, wall (up to 30°) or ceiling. Noise level: 65 dBA or less. Joint ranges: J1, J2, J4, J5, J6 ±360°, J3 ±165°. Joint speeds: J1-J2 155°/s, J3 230°/s, J4-J6 270°/s. Tool supply: 24 VDC, 3 A
Design and Build Quality
The HCR-14 is a 6-axis collaborative robot made by Hanwha Robotics. Published build data: Weight: 42 kg. Footprint: Ø190 mm. IP rating: IP66. Mounting: floor, wall (up to 30°) or ceiling. Noise level: 65 dBA or less. Joint ranges: J1, J2, J4, J5, J6 ±360°, J3 ±165°. Joint speeds: J1-J2 155°/s, J3 230°/s, J4-J6 270°/s. Tool supply: 24 VDC, 3 A.
Programming and Software
Controller and Software
Published controller for the HCR-14: Control cabinet, 550 x 482 x 251 mm, 25.2 kg, 100-240 VAC 50-60 Hz, max 3.6 kW; 12.1-inch teach pendant. Programming interfaces, software licences and simulation tools vary by package, so confirm what is included before ordering.
Industrial Communication
Published interfaces are TCP/IP, Modbus TCP, EtherNet/IP, controller I/O with 16 digital inputs, 16 digital outputs, 2 analog inputs, 2 analog outputs and 2 incremental encoder inputs, two M8 8-pin tool connectors, each with 2 digital inputs and 2 digital outputs and EtherCAT tool port.
Hanwha HCR-14 Applications and Use Cases
Typical applications for the HCR-14 are machine tending, inspection, polishing, palletizing and pick and place.
Machine tending
The HCR-14 loads and unloads machine tools, presses and moulding machines within its 1420 mm reach.
Inspection
The HCR-14 presents parts to cameras and gauges, or carries the sensor to the part.
Polishing
The HCR-14 is used for polishing within its 14 kg payload and 1420 mm reach.
Hanwha HCR-14 Price and Value
The Hanwha HCR-14 is listed from USD 38,600 on All Things Cobots. The controller, end effectors, safety equipment and integration affect the final price and are quoted separately. Prices are indicative, are not final and may change.
Pros and Cons
Pros
14 kg maximum payload with a 1420 mm reach
±0.04 mm repeatability
Speed: 1.5 m/s linear speed; joint speeds up to 270°/s
Collaborative design for work near people, subject to a risk assessment
Wide choice of communication interfaces
Cons
The 14 kg maximum payload includes the end effector
End effectors, safety equipment and integration are quoted separately
Who Should Buy the Hanwha HCR-14?
The Hanwha HCR-14 fits manufacturers that want a robot working near people without full fencing, subject to a risk assessment.
See the full Hanwha HCR-14 product listing on All Things Cobots.
Hanwha HCR-14 FAQ
How much does the Hanwha HCR-14 cost?
The Hanwha HCR-14 is listed from USD 38,600 on All Things Cobots. The price is indicative and may change, and it does not include end effectors, safety equipment or integration.
What is the payload and reach of the Hanwha HCR-14?
The HCR-14 has a maximum payload of 14 kg and a reach of 1420 mm.
How accurate is the Hanwha HCR-14?
Its published repeatability is ±0.04 mm.
How many axes does the Hanwha HCR-14 have?
The HCR-14 has 6 axes.
How is the Hanwha HCR-14 programmed?
Programming is done with Hanwha's own software. Confirm the included interfaces and SDKs with the supplier.
Which controller does the Hanwha HCR-14 use?
Published controller: Control cabinet, 550 x 482 x 251 mm, 25.2 kg, 100-240 VAC 50-60 Hz, max 3.6 kW; 12.1-inch teach pendant.
How much does the Hanwha HCR-14 weigh?
Published weight: 42 kg. Footprint: Ø190 mm. IP rating: IP66. Mounting: floor, wall (up to 30°) or ceiling. Noise level: 65 dBA or less. Joint ranges: J1, J2, J4, J5, J6 ±360°, J3 ±165°. Joint speeds: J1-J2 155°/s, J3 230°/s, J4-J6 270°/s. Tool supply: 24 VDC, 3 A.
Is the Hanwha HCR-14 a collaborative robot?
Yes. The HCR-14 is a collaborative robot. Every collaborative application still needs its own risk assessment.
What is the Hanwha HCR-14 used for?
Typical applications are machine tending, inspection, polishing, palletizing and pick and place.
Specifications and prices are based on manufacturer and distributor information. Prices are indicative, are not final and may change.
