Güdel EP 1-Axis Gantry Review: Specs and Uses of the Single-Axis Positioning Gantry
Updated: 7 days ago
The Güdel EP is a single-axis gantry module used as a positioning or auxiliary axis. The manufacturer does not publish a price. This review covers its specifications, features and uses.
Quick Verdict
The EP is the simplest member of the range: one beam, one carriage. It carries more than the same size of multi-axis gantry because there is no vertical axis to support: 1,300 N on the EP-3, 3,100 N on the EP-4 and 8,000 N on the EP-5 in high-load tuning. In high-dynamic tuning the EP-4 reaches 200 m/min. Repeatability is ±0.02 mm. The maker describes it mainly as an auxiliary or positioning axis and names no specific applications; the stroke figure on the page is unclear and should be confirmed.
Güdel EP 1-Axis Gantry at a Glance
Axes: 1
Sizes: EP-3, EP-4, EP-5
Max payload force: 1,300 N to 8,000 N
Repeatability: ±0.02 mm
Max speed: Up to 200 m/min
Price: on request
Güdel EP 1-Axis Gantry Technical Specifications
The table below lists what the manufacturer states.
Model | High dynamic | Optimal | High load | Carriage mass |
EP-3 | 500 N at 150 m/min | 800 N at 112.5 m/min | 1,300 N at 75 m/min | 40.3 kg |
EP-4 | 1,300 N at 200 m/min | 1,900 N at 120 m/min | 3,100 N at 75 m/min | 66.3 kg |
EP-5 | 3,200 N at 150 m/min | 4,700 N at 100 m/min | 8,000 N at 60 m/min | 126.6 kg |
Payloads are stated as forces in newtons. Carriage mass excludes motor, cabinet and cables. Maximum stroke is not clearly stated on the page.
Design and Build Quality
A roller and guideway system gives smooth, quiet travel. Beam sections are standardized and legs can be placed freely along the beam.
Software and Integration
Drive and Control
Motors and controls are selected by the integrator.
Configuration
Three tunings per size trade payload for speed.
Güdel EP 1-Axis Gantry Applications and Use Cases
Positioning Axis
Moving a tool or device along a line.
Auxiliary Axis
Adding travel to another machine.
Transfer
Shuttling parts between two stations.
Güdel EP 1-Axis Gantry Price and Value
Güdel does not publish a price for the Güdel EP 1-Axis Gantry; it is quoted on request.
For the company behind the product, read the Güdel Group Company Profile: History, Ownership and Products.
Pros and Cons
Pros
Up to 8,000 N
Up to 200 m/min
±0.02 mm repeatability
Simple and modular
Cons
One axis only
Stroke not clearly stated
Motors and control not included
No published price
Who Should Buy the Güdel EP 1-Axis Gantry?
It fits machine builders who need one long, precise, heavily loaded axis.
Güdel EP 1-Axis Gantry FAQ
How much does the Güdel EP 1-Axis Gantry cost?
Güdel does not publish a price for the Güdel EP 1-Axis Gantry; it is quoted on request.
What is the Güdel EP?
A modular single-axis gantry.
How much can the Güdel EP carry?
Up to 1,300 N, 3,100 N or 8,000 N, depending on size.
How fast is the Güdel EP?
Up to 200 m/min on the EP-4.
How precise is the Güdel EP?
Repeatability is ±0.02 mm.
Which sizes are available?
EP-3, EP-4 and EP-5.
How heavy is the carriage?
40.3 to 126.6 kg, without motor.
What is the EP used for?
As an auxiliary or positioning axis.
Specifications are based on manufacturer information and may change.
