Güdel CP 3-Axis Gantry Review: Specs and Uses of the Cantilever Three-Axis Gantry
Updated: 7 days ago
The Güdel CP is a three-axis gantry with a cantilever arm, supported on one side only. The manufacturer does not publish a price. This review covers its specifications, features and uses.
Quick Verdict
The CP gives three-axis reach without a second row of legs. The cross axis projects from a single beam, which leaves the floor on the open side free for machines, conveyors or operators. The price of that is payload: the range tops out at 5,000 N on the CP-5 HD, far below the FP area gantry. Four models start at 800 N, horizontal speeds reach 150 m/min and repeatability is ±0.02 mm. Payload must sit within ±50 mm of the vertical axis centre, and falls with long vertical strokes. Stroke figures on the page need checking against the data sheet.
Güdel CP 3-Axis Gantry at a Glance
Axes: 3
Design: Cantilever, one-sided support
Max payload force: 800 N to 5,000 N
Repeatability: ±0.02 mm
Max X speed: 150 m/min
Price: on request
Güdel CP 3-Axis Gantry Technical Specifications
The table below lists what the manufacturer states.
Model | Max payload force | Payload tiers | X speed range | Carriage mass |
CP-3 | 800 N | 300 / 500 / 800 N | 90 to 150 m/min | 175 kg |
CP-4 | 2,000 N | 800 / 1,250 / 2,000 N | 100 to 150 m/min | 333 kg |
CP-5 | 4,500 N | 2,000 / 3,100 / 4,500 N | 120 to 150 m/min | 516 kg |
CP-5 HD | 5,000 N | 2,000 / 3,100 / 5,000 N | 37.5 to 150 m/min | 552 kg |
Payloads are stated as forces in newtons. Carriage mass excludes the Z axis, motors, cabinet and cables.
Design and Build Quality
With no leg on one side, the working area is open for access. Beam sections, hole pitch and tray supports are shared with the other Güdel gantries.
Software and Integration
Drive and Control
Motors and controls are selected by the integrator.
Configuration
High-dynamic, optimal and high-load tunings per model.
Güdel CP 3-Axis Gantry Applications and Use Cases
Machine Loading and Unloading
Dynamic loading from above.
Palletizing
Stacking beside the line.
Large Working Areas
Handling where floor space must stay clear.
Güdel CP 3-Axis Gantry Price and Value
Güdel does not publish a price for the Güdel CP 3-Axis Gantry; it is quoted on request.
For the company behind the product, read the Güdel Group Company Profile: History, Ownership and Products.
Pros and Cons
Pros
Open side keeps floor clear
±0.02 mm repeatability
Up to 150 m/min
Shares parts with other Güdel gantries
Cons
5,000 N maximum
Payload must be near the Z axis centre
Motors and control not included
No published price
Who Should Buy the Güdel CP 3-Axis Gantry?
It fits cells where three-axis handling is needed and one side must remain accessible.
Güdel CP 3-Axis Gantry FAQ
How much does the Güdel CP 3-Axis Gantry cost?
Güdel does not publish a price for the Güdel CP 3-Axis Gantry; it is quoted on request.
What is the Güdel CP?
A three-axis cantilever gantry.
How much can the Güdel CP carry?
From 800 N on the CP-3 to 5,000 N on the CP-5 HD.
How fast is the Güdel CP?
Up to 150 m/min on the X axis.
How precise is the Güdel CP?
Repeatability is ±0.02 mm.
What is the advantage of the cantilever design?
There is no support leg on one side, which keeps floor space clear.
Which models are available?
CP-3, CP-4, CP-5 and CP-5 HD.
What is the CP used for?
Machine loading and unloading, palletizing and handling over large areas.
Specifications are based on manufacturer information and may change.
