GRIP SHW Manual Tool Changer Review: Specs, Price and Applications
The GRIP SHW is a manual end-of-arm tool changer with an optimized locking mechanism in which a cylindrical bolt locks the upper and lower assemblies together. The interface follows DIN EN ISO 9409-1.
Repeatability is under 0.02 mm and it is rated for over 5,000 changes without loss of accuracy. It handles high loads with low dead weight, is made of anodized high-strength aluminium and changes tools without tools using an integrated folding lever operable with one hand. A locking pin prevents unintentional release, centering discs are optional and there is a mounting surface for energy feed-through such as the SEK coupling.
Quick Verdict
A light, precise manual changer for frequent tool swaps, expandable with SEK couplings for signals and media.
GRIP SHW Manual Tool Changer at a Glance
Specification | Details |
Product type | Manual tool changer |
Interface | DIN EN ISO 9409-1 |
Repeatability | Under 0.02 mm |
Durability | Over 5,000 changes |
Locking | Cylindrical bolt, folding lever |
Operation | One hand, tool-free |
Safety | Locking pin |
Material | Anodized high-strength aluminium |
Options | Centering discs, SEK energy coupling |
Price | Request a quote |
Design and Operating Principle
A folding lever drives the cylindrical bolt, pulling the tool-side plate tight against the robot side for a play-free joint.
Low dead weight preserves payload, which matters on cobots and small robots.
The integrated mounting surface accepts the SEK coupling to pass 12 signals plus air and vacuum.
Integration and Selection
Mount the upper assembly on the robot and a lower assembly on each tool; add SEK for media. Use centering discs for best alignment.
Train operators on lever locking and pin engagement.
Industry Applications
Industry | Typical use |
Machine tending | Manual gripper swaps |
Cobots | Multi-tool cells |
Assembly | Changing process tools |
Education | Training robots |
Functional Uses
Manual tool changing
Repeatable positioning
Media pass-through with SEK
Lightweight tool interface
Pros and Cons
Advantages
Light aluminium
Under 0.02 mm repeatability
One-hand operation
Expandable with SEK
Limitations
Manual only
Payload not on A3
Pneumatics need SEK or SHW-P
Who Should Consider the GRIP SHW Manual Tool Changer?
The SHW suits robots and cobots needing quick manual tool changes.
Price and Availability
Price: Request a quote. Essential Robot Products supplies the GRIP SHW in North America and prices it by configuration and quantity. Budget for adapters, mounting, air or electrical connections and commissioning as part of the complete installation.
Further Reading
GRIP SHW Manual Tool Changer FAQ
What locks the SHW?
A cylindrical bolt driven by a folding lever.
What is the repeatability?
Under 0.02 mm.
How many changes is it rated for?
Over 5,000.
Can it pass signals?
Yes, with the SEK energy coupling.
What material is it?
Anodized high-strength aluminium.
How much does it cost?
Request a quote from Essential Robot Products.
